高级检索

喷雾共沉积工艺过程中的凝固与动量传输行为

刘永长, 吕衣礼, 杨根仓, 朱震刚

刘永长, 吕衣礼, 杨根仓, 朱震刚. 喷雾共沉积工艺过程中的凝固与动量传输行为[J]. 粉末冶金技术, 1996, 14(4): 253-258.
引用本文: 刘永长, 吕衣礼, 杨根仓, 朱震刚. 喷雾共沉积工艺过程中的凝固与动量传输行为[J]. 粉末冶金技术, 1996, 14(4): 253-258.
Liu Yongzhang, Lü Yili, Yang Gencang, Zhu Zhengang. SOLIDIFICATION AND MOMEMTUM TRANSPORTION BEHAVIOUR DURING PROCESS OF SPRAY CO DEPOSITION TECHNOLOGY[J]. Powder Metallurgy Technology, 1996, 14(4): 253-258.
Citation: Liu Yongzhang, Lü Yili, Yang Gencang, Zhu Zhengang. SOLIDIFICATION AND MOMEMTUM TRANSPORTION BEHAVIOUR DURING PROCESS OF SPRAY CO DEPOSITION TECHNOLOGY[J]. Powder Metallurgy Technology, 1996, 14(4): 253-258.

喷雾共沉积工艺过程中的凝固与动量传输行为

基金项目: 

国家自然科学基金、航空科学基金和高等学校博士学科点专项科研基金资助项目。

详细信息
    作者简介:

    刘永长,1990年毕业于西北工业大学,主要研究方向为快速凝固基础理论与应用、高阻尼功能结构一体化材料的制备与内耗设计。

SOLIDIFICATION AND MOMEMTUM TRANSPORTION BEHAVIOUR DURING PROCESS OF SPRAY CO DEPOSITION TECHNOLOGY

  • 摘要: 对喷雾共沉积工艺过程中的凝固与动量传输行为进行了分析。指出:在喷雾共沉积工艺过程中,孔穴形核方式有利于晶粒的细化。在动量传输全过程分析中,给出了金属微滴、增强相颗粒碰撞前后的速度计算公式,并在此基础上推导出了雾化微滴液膜铺展厚度计算公式。结果表明:雾化工艺参数与熔体界面能显著影响液膜厚度,对制备理想的沉积材料具有重要的指导意义。
    Abstract: The paper has analysed the solidification and momemtum transportation behaviour during the process of spray co-deposition technology and indicated that the nucleation mode of pore was favourable to the refining of crystal.During the whole process of analysing momemtum transportation,the fine drops of metal and the calculation formula for calculating the speed before and after the collision between strengthened phase particles has been put forward,and on this basis,a formula for calculating the spreading thickness of fine drop liquid film has been also derived.Results show that the technological parameters of atomization and the interfacial energy exert an influence on the thickness of liquid film and attach an important to instructive significance on the manufacture of ideal deposition materials.
计量
  • 文章访问数:  208
  • HTML全文浏览量:  28
  • PDF下载量:  4
  • 被引次数: 0
出版历程
  • 收稿日期:  1995-12-26
  • 网络出版日期:  2021-08-03

目录

    /

    返回文章
    返回