高级检索

PREP法FGH95粉末的预热处理

牛连奎, 张英才

牛连奎, 张英才. PREP法FGH95粉末的预热处理[J]. 粉末冶金技术, 1998, 16(2): 101-107.
引用本文: 牛连奎, 张英才. PREP法FGH95粉末的预热处理[J]. 粉末冶金技术, 1998, 16(2): 101-107.
Niu Liankui, Zhang Yingcai. Pre-heat Treatmeant PREP FGH95 Powders[J]. Powder Metallurgy Technology, 1998, 16(2): 101-107.
Citation: Niu Liankui, Zhang Yingcai. Pre-heat Treatmeant PREP FGH95 Powders[J]. Powder Metallurgy Technology, 1998, 16(2): 101-107.

PREP法FGH95粉末的预热处理

详细信息
    作者简介:

    牛连奎,硕士,于冶金部钢铁研究总院(难熔合金研究室从事硬质合金生产、飞机涡轮盘研制工作。

Pre-heat Treatmeant PREP FGH95 Powders

  • 摘要: 研究了PREP法制备的FGH95粉末经不同温度预热处理后的粉末颗粒表面与内部显微组织的变化。试验结果表明:采用预热处理方法既可使粉末颗粒显微组织更加均匀化,又可使粉末颗粒中的亚稳碳化物MC'发生分解和转变,重新析出更稳定的MC、M23C6及M6C碳化物,明显改变碳化物的稳定性和分布状态。
    Abstract: The effect of various pre-heat treatments (950~1150℃) on the surface and inside microstructure of the PREP FGH95 powder-particles has been studied.The results show that during pre-heat treatment,the microstructure of the powder particles may be more homogenized and the nonequilibrium carbides (MC') can be transformed into stable carbides(MC,M23C6,M6C).
计量
  • 文章访问数:  202
  • HTML全文浏览量:  29
  • PDF下载量:  8
  • 被引次数: 0
出版历程
  • 收稿日期:  1997-10-05
  • 网络出版日期:  2021-07-20

目录

    /

    返回文章
    返回