AdvancedSearch

column
The effect of Al2O3 content on microstructure and mechanical property of cramics ZrO2/Al2O3
Huang Chuanzhen, Sun Jing, Liu Hanlian, Zou Bin, Wang Suilian, Gu Meilin
2005, 23(5): 323-326. DOI: 10.3321/j.issn:1001-3784.2005.05.001
Abstract PDF
The interfacial bonding strength of steel/Al-Pb composite strips manufactured by spray forming and rolling
Yang Lin, Tian Chong, Chen Guiyun, Zhao Jiuzhou, Zhang Yongchang
2005, 23(5): 327-329. DOI: 10.3321/j.issn:1001-3784.2005.05.002
Abstract PDF
Development of high performance sintered wicks for miniature CPLs
Li Qiang, Xuan Yimin, Chen Xiaobo
2005, 23(5): 330-333. DOI: 10.3321/j.issn:1001-3784.2005.05.003
Abstract PDF
Effects of addition of nano-structured powders on microstructure and mechanical properties of Ti(C,N)-based cermets
Liu Wenjun, Zheng Yong, Xiong Weihao
2005, 23(5): 334-338. DOI: 10.3321/j.issn:1001-3784.2005.05.004
Abstract PDF
Preparation of NiAl2O4/Al2O3 composite nanopowder
Liu Tao, Li Jian, Ling Guoping, Fan Jinglian
2005, 23(5): 339-342. DOI: 10.3321/j.issn:1001-3784.2005.05.005
Abstract PDF
Study of Al2O3/Cr3C2/(W,Ti)C Ceramic Die Materials
Sun Deming, Liu Lihong, Liu yuting, Xu Chonghai, Lu Xiaoyang, Zhao Guoqun
2005, 23(5): 343-346. DOI: 10.3321/j.issn:1001-3784.2005.05.006
Abstract PDF
Preparing Al-Pb alloy by mechanical milling
Fang Wenbin, He Wenxiong, Wang Erde
2005, 23(5): 347-351. DOI: 10.3321/j.issn:1001-3784.2005.05.007
Abstract PDF
Effect of processing parameters on the properties of injection molding anisotropic bonded NdFeB magnet
Duan Bohua, Qu Xuanhui, Zhou Limeng, Xu Zhengzhou, Guo Shibo
2005, 23(5): 352-355. DOI: 10.3321/j.issn:1001-3784.2005.05.008
Abstract PDF
Preparation of iron oxide nanopowder
Fan Jinglian, Cheng Huichao, Liu Tao, Ma Yunzhu, Li Zhixi
2005, 23(5): 356-358. DOI: 10.3321/j.issn:1001-3784.2005.05.009
Abstract PDF
Effects of the graphite addition on the performance of the Ni-Cr-Mo-graphite composites made by P/M hot pressing
Liu Rutie, Li Xibin, Zhao Fu'an, Xiong Yongjun
2005, 23(5): 359-362. DOI: 10.3321/j.issn:1001-3784.2005.05.010
Abstract PDF
Characterization and processes study of electroless plating nickel on the copper particles
Chen Xueding, Li Hui, Chen Zijiang, Xu Hui
2005, 23(5): 363-367. DOI: 10.3321/j.issn:1001-3784.2005.05.011
Abstract PDF
Characteristic of static and lubrication of EBS wax used for PM lubricant powder
Chen Bangfeng, Yang Xia, Guo Shiju
2005, 23(5): 368-371. DOI: 10.3321/j.issn:1001-3784.2005.05.012
Abstract PDF
Elastic graphite die design about hot pressing thin wall diamond drill bit
Ding Huadong, Lu Tao, Fu Suli, Yu Jianrong, Zhang Li
2005, 23(5): 372-374. DOI: 10.3321/j.issn:1001-3784.2005.05.013
Abstract PDF
Upset welding of iron-based powder metallurgy parts
2005, 23(5): 375-377. DOI: 10.3321/j.issn:1001-3784.2005.05.014
Abstract PDF
The recent development of WC-Co cemented carbide with plate-like WC grains
Li Jiongyi, Cao Shunhua, Lin Xinping
2005, 23(5): 378-382. DOI: 10.3321/j.issn:1001-3784.2005.05.015
Abstract PDF
Development of the nanocrystalline superhard Ti-Si-N coating
Shen Baoluo, Wang Jun, Zhang Tiebang, Gao Jian, Feng Hao, Haung Sijiu
2005, 23(5): 383-387. DOI: 10.3321/j.issn:1001-3784.2005.05.016
Abstract PDF
A review on application of intelligent control in powder metallurgy
Meng Jie, Jia Chengchang
2005, 23(5): 388-392. DOI: 10.3321/j.issn:1001-3784.2005.05.017
Abstract PDF