AdvancedSearch

column
Study on the wettability and mechanism between Ni-Al powders and SiC ceramics
Zhang Li, Li Shujie, Zhang Kun
2006, 24(3): 163-165. DOI: 10.3321/j.issn:1001-3784.2006.03.001
Abstract PDF
Microstructure analysis of rapidly solidified Al-40Si alloy fabricated by spray deposition
Yang Fuliang, Zhang Wei, Yi Danqing, Wang Richu, Chen Zhaoke
2006, 24(3): 166-169,174. DOI: 10.3321/j.issn:1001-3784.2006.03.002
Abstract PDF
Preparation of Al nanopowders by confined arc plasma
Wei Zhiqiang, Xia Tiandong, Yan Zhijin, Bai Lifeng, Yan Pengxun
2006, 24(3): 170-174. DOI: 10.3321/j.issn:1001-3784.2006.03.003
Abstract PDF
Microstructures,crack propagation and toughening of melt-growth in-situ toughening Al2O3/20% ZrO2(3Y) composite ceramics
Zhao Zhongmin, Zhang Long, Song Yigang, Yin Yujun, Pan Chuanzeng
2006, 24(3): 175-181. DOI: 10.3321/j.issn:1001-3784.2006.03.004
Abstract PDF
Effect of MoS2 on the sintering behaviors and mechanical properties of iron-based friction materials
Xiong Xiang, Chen Jie, Yao Pingping, Li Jianghong, Huang Baiyun
2006, 24(3): 182-186. DOI: 10.3321/j.issn:1001-3784.2006.03.005
Abstract PDF
Influences of high energy ball milling on microstructure and properties of a new steel bonded titanium carbide
Xiong Yongjun, Li Xibin, Liu Rutie, Zhao Fuan
2006, 24(3): 187-191. DOI: 10.3321/j.issn:1001-3784.2006.03.006
Abstract PDF
Effect of ZrO2(3Y) addition on microstructure and properties of cermet composites
Chen Jun, An Lin
2006, 24(3): 192-194,198. DOI: 10.3321/j.issn:1001-3784.2006.03.007
Abstract PDF
Intrinsic corrosion characteristic of sintered NdFeB permanent magnets
Liu Weiqiang, Yue Ming, Zhang Jiuxing, Wang Gongping
2006, 24(3): 195-198. DOI: 10.3321/j.issn:1001-3784.2006.03.008
Abstract PDF
Research on WC-6Co-1.5Al hardmetals prepared by spark plasma sintering
Li Yuanyuan, Zhang Jianbing, Li Xiaoqiang, Long Yan, Chen Weiping
2006, 24(3): 199-202,208. DOI: 10.3321/j.issn:1001-3784.2006.03.009
Abstract PDF
On the fabricating and compressive property of aluminum foam
Zuo Xiaoqing, Zhao Yong, Zhang Xiqiu, Lei Ting, Sun Jialin
2006, 24(3): 203-208. DOI: 10.3321/j.issn:1001-3784.2006.03.010
Abstract PDF
The research of processing of Zn/Al2O3 composite powders obtained by high energy ball milling of Al-ZnO
Luo Cheng, Zhang Hongxia, Yang Ming, Hu Shubing, Tu Jiangping
2006, 24(3): 209-212. DOI: 10.3321/j.issn:1001-3784.2006.03.011
Abstract PDF
Research on efficiency of amorphous and nanocrystal line Nd2Fe14B/α-Fe powder prepared by two milling methods
Wang Ying, Wang Erde, Yu Yang
2006, 24(3): 213-217. DOI: 10.3321/j.issn:1001-3784.2006.03.012
Abstract PDF
Effects of annealing and adding Si on the microstructure of M10 type sintered steel
Li Zhiyou, Zhang Lin, Liu Fang, Zhou Kechao
2006, 24(3): 218-222. DOI: 10.3321/j.issn:1001-3784.2006.03.013
Abstract PDF
Pantograph slide plates for electric locomotive and their recent development
Hou Ming, Sun Lemin, Li Aina
2006, 24(3): 223-226. DOI: 10.3321/j.issn:1001-3784.2006.03.014
Abstract PDF
Combining electrostatic die wall lubrication and warm compaction to enhance green and sintered properties of P/M components
, , , , , ,
2006, 24(3): 227-232. DOI: 10.3321/j.issn:1001-3784.2006.03.015
Abstract PDF