AdvancedSearch

column
Study of saturation magnetization and coercive force of Ti(CN) base cermets
Zhou Shuzhu, Peng Weizhen, Wang Shequan, Wang Lingsen
2006, 24(4): 244-247. DOI: 10.3321/j.issn:1001-3784.2006.04.001
Abstract PDF
Maximum plastic work principle for PM sintered material
Qin Xunpeng, Hua Lin
2006, 24(4): 248-250,255. DOI: 10.3321/j.issn:1001-3784.2006.04.002
Abstract PDF
Effects of starting powders size on the microstructures of TiCN-based cermets
Han Chengliang, Liu Ning, Fan Guangneng, Gao Daming
2006, 24(4): 251-255. DOI: 10.3321/j.issn:1001-3784.2006.04.003
Abstract PDF
Study on internal oxidation product of Cu-0.6%Al alloy prepared by powder metallurgy
Lu Yanjie, Kang Zhijun, Cui Shun, Lin Chenguang, Hui Zhilin, Li Ming, Zhou Zenglin
2006, 24(4): 256-258. DOI: 10.3321/j.issn:1001-3784.2006.04.004
Abstract PDF
Research on the mechanical properties of spark plasma sintering NdFeB sintered magnets
Wang Gongping, Yue Ming, Zhang Jiuxing, Liu Weiqiang, Ren Ren, Liu Chengyang
2006, 24(4): 259-262,266. DOI: 10.3321/j.issn:1001-3784.2006.04.005
Abstract PDF
Bonded NdFeB magnets prepared by injection molding
Chen Yike, Ye Jinwen
2006, 24(4): 263-266. DOI: 10.3321/j.issn:1001-3784.2006.04.006
Abstract PDF
Investigation on relative density of nanocrystalline Nd2Fe14B/α-Fe composite permanent magnetic material prepared by extrusion
Wang ying, Yu yang, Wang Erde, Hu Lianxi
2006, 24(4): 267-270. DOI: 10.3321/j.issn:1001-3784.2006.04.007
Abstract PDF
Research on physical and mechanical properties of (Ti, Al)N monolayer and multilayer PVD coatings
Chen Li, Wu Enxi, Yin Fei, Wang Xiuquan
2006, 24(4): 271-274. DOI: 10.3321/j.issn:1001-3784.2006.04.008
Abstract PDF
A novel water soluble binder for MIM
Li Haipu, Zhong Hong, Zhu Ailan
2006, 24(4): 275-279. DOI: 10.3321/j.issn:1001-3784.2006.04.009
Abstract PDF
Study of structure and properties of ferrous sintered cam materials after laser surface quenched
Li Yueying, Liu Yongbing, Chen Hua
2006, 24(4): 280-282,286. DOI: 10.3321/j.issn:1001-3784.2006.04.010
Abstract PDF
Influence of the annealing temperature on the magnetic properties of amorphous Fe74Al4Sn2P10C2B4Si4 powder core
Lu Caowei, Lu Zhichao, Li Deren, Guo Feng, Wang Jun, Zhao Tongchun, Zhou Shaoxiong
2006, 24(4): 283-286. DOI: 10.3321/j.issn:1001-3784.2006.04.011
Abstract PDF
Effect of surface coating on inoxidizability of bronze powder
Zhu Lixia, Zhao Maiqun, Jin Wenfeng
2006, 24(4): 287-290. DOI: 10.3321/j.issn:1001-3784.2006.04.012
Abstract PDF
Study on the technology of penetrating casting for aluminium foam
2006, 24(4): 291-294. DOI: 10.3321/j.issn:1001-3784.2006.04.013
Abstract PDF
Structure of forming die for preparing high strength PM bevel gears
Jiang Yeqin, Zhang Zhiyong, Xie Weiren
2006, 24(4): 295-298. DOI: 10.3321/j.issn:1001-3784.2006.04.014
Abstract PDF
Review of formation of Ni3Al intermetallics compounds by mechanical alloying
Meng Jie, Jia Chengchang, Wang Kaiming
2006, 24(4): 299-303,309. DOI: 10.3321/j.issn:1001-3784.2006.04.015
Abstract PDF
Property comparison of PM bronze bearings manufactured in Europe and North America
, ,
2006, 24(4): 304-309. DOI: 10.3321/j.issn:1001-3784.2006.04.016
Abstract PDF
Combining electrostatic die wall lubrication and warm compaction to enhance green and sintered properties of PM components
, , , , , ,
2006, 24(4): 310-312. DOI: 10.3321/j.issn:1001-3784.2006.04.017
Abstract PDF