AdvancedSearch

column
Influence of carbon content on the properties of diffusion alloyed Fe-Cu-C sintered materials
Dang Wenlong, Liu Xiangqing, Wang Limin, Wang Ligen, Wang Lei
2013, 31(2): 83-88. DOI: 10.3969/j.issn.1001-3784.2013.02.001
Abstract PDF
Investigation on complete solution temperature of γ' in the P/M superalloy of FGH96
Fang Bin, Ji Zhen, Tian Gaofeng, Jia Chengchang
2013, 31(2): 89-95. DOI: 10.3969/j.issn.1001-3784.2013.02.002
Abstract PDF
Study on preparation of self-fluxing alloy powder Fe55 and microstructure and performance of its coating
Xie Chuandi, Sun Haishen, Li Guoping, Chen Wen, Luo Fenghua
2013, 31(2): 96-100. DOI: 10.3969/j.issn.1001-3784.2013.02.003
Abstract PDF
Influence of pre-diffusion treatment of Cr-Fe powders on the microstructure and properties of iron-based alloys
Zhang Linxiang, Luo Fenghua, Li Guoping, Yuan Yong, Cui Jianmin
2013, 31(2): 101-107. DOI: 10.3969/j.issn.1001-3784.2013.02.004
Abstract PDF
The process study of Al2O3/Mo nano powder preparation by sol-gel method
Chen Chuang, Wei Shizhong, Zhou Zhihong, Zhang Guoshang, Li Jiwen, Xu Liujie
2013, 31(2): 108-113,118. DOI: 10.3969/j.issn.1001-3784.2013.02.005
Abstract PDF
Warm compaction behaviors and sintering performance of 410L stainless steel powder
2013, 31(2): 114-118. DOI: 10.3969/j.issn.1001-3784.2013.02.006
Abstract PDF
Tensile-compressive mechanical properties of a hardened tool steel Cr12MoV at different hardness levels
Tang Linhu, Hu Guangping, Zhang Junping, Huang Jianlong, Chang Wenchun, Guo Hongjian
2013, 31(2): 119-123. DOI: 10.3969/j.issn.1001-3784.2013.02.007
Abstract PDF
Effect of hot-die compaction process on microstructure and properties of ferrous materials
Fan Wentao, Huang Junsheng
2013, 31(2): 124-127,138. DOI: 10.3969/j.issn.1001-3784.2013.02.008
Abstract PDF
Effect of mechanical milling on preparing carbon nanotubes aluminum base oil-impregnated bearing
Wu Kaixia, Zha Wusheng, Jia Yongcan, An Xuguang
2013, 31(2): 128-131. DOI: 10.3969/j.issn.1001-3784.2013.02.009
Abstract PDF
Microstructure and CO2 corrosion resistance of Fe-based amorphous coating prepared by oxy fuel ionization (OFI) spraying method
Cai Feng, Liu Wei, Lin Xueqiang, Lu Minxu
2013, 31(2): 132-138. DOI: 10.3969/j.issn.1001-3784.2013.02.010
Abstract PDF
Research progresses of powder injection molding for titanium alloys
Lu Xin, Liu Chengcheng, Qu Xuanhui
2013, 31(2): 139-144,148. DOI: 10.3969/j.issn.1001-3784.2013.02.011
Abstract PDF
Introduction to the powder metallurgy technology for next generation in Japan
2013, 31(2): 145-148. DOI: 10.3969/j.issn.1001-3784.2013.02.012
Abstract PDF
P/M components for synchronizer systems
, ,
2013, 31(2): 149-155. DOI: 10.3969/j.issn.1001-3784.2013.02.013
Abstract PDF