AdvancedSearch

column
The study of (Fe0.6Co0.1Ni0.3)70Zr6B11Si13 alloying powder prepared by mechanical alloying
Liu Lixin, Guo Shibo, Cui Datian, Tang Guoning, Wu Xianpeng
2015, 33(3): 163-165,175. DOI: 10.3969/j.issn.1001-3784.2015.03.001
Abstract PDF
Research on Microwave Dielectric properties of SrTiO3-Al2O3 system ceramic
Di Jiaxin, Dong Guixia, Dong Li, Zhang Xi
2015, 33(3): 166-169,194. DOI: 10.3969/j.issn.1001-3784.2015.03.002
Abstract PDF
Study on the Effect of Sub-micro SiC Particle on the Properties and Microstructure of Ti(C, N)-based Cermet
Liu Bing, Zhang Qian, Chen Hui, Tu Mingjing
2015, 33(3): 170-175. DOI: 10.3969/j.issn.1001-3784.2015.03.003
Abstract PDF
Preparation of lubricating grease with nanoZinc Oxide and the self repair experiment for friction surface
He Qiang, Hao Anlin
2015, 33(3): 176-179. DOI: 10.3969/j.issn.1001-3784.2015.03.004
Abstract PDF
Study about the preparation of transparent conductive material Cd2SnO4 Ⅰ-Raw material preparation using solid phase sintering
, , , , , , ,
2015, 33(3): 180-185. DOI: 10.3969/j.issn.1001-3784.2015.03.005
Abstract PDF
Study on Wear Resistance of Al2O3 Particle Reinforced Al Matrix Composites
Fan Tao, Liu Bowen, Sun Yanrong, Wang Hu, Tang weizhong, Jia Chengchang
2015, 33(3): 186-189. DOI: 10.3969/j.issn.1001-3784.2015.03.006
Abstract PDF
The effect of different types of mullite on friction and wear properties of copper-based materials
Wang Zhenbo, Wang Xiufei, Bai Tongqing, Song Jiajie, Yin Cailiu
2015, 33(3): 190-194. DOI: 10.3969/j.issn.1001-3784.2015.03.007
Abstract PDF
Influence of process parameters on characteristics of Fe-Si-Ni-Al-Ti soft magnetic alloy powder prepared by inert-gas atomization
Liu Xin, Mao Xinhua, Xie Huanwen, Cai Yixiang
2015, 33(3): 195-201. DOI: 10.3969/j.issn.1001-3784.2015.03.008
Abstract PDF
Dispersion Copper-MoS2-Mo Antiwear Self-lubrication Composite Materials Prepared by Vacuum Hot Pressing Technology
Zhao Qing, Li Baoyuan, Ma Douqin
2015, 33(3): 202-207. DOI: 10.3969/j.issn.1001-3784.2015.03.009
Abstract PDF
Research of Composite Plastic Deformation Process on Thin Wall Tube of Magnesium Alloy with Large Slenderness Ratio
Yu Yang, Pei Chonglei, Zhang Wencong
2015, 33(3): 208-212. DOI: 10.3969/j.issn.1001-3784.2015.03.010
Abstract PDF
Microwave Sintering of Ferrous Metal Powder and Influence of Particle Size
Wu Dan, Chen Wenge, Zhou Xian, Xue Qingxu
2015, 33(3): 213-217. DOI: 10.3969/j.issn.1001-3784.2015.03.011
Abstract PDF
Effects of Cu content on the properties of injection moulded Cu/Al2O3 composites
Qiao Bin, Fu Guangzhu, Dong Yanfeng, He Yiqiang, Feng Lichao, Li Huaqiang
2015, 33(3): 218-221. DOI: 10.3969/j.issn.1001-3784.2015.03.012
Abstract PDF
Research progress for purification of carbon nanotubes
Zheng Jia, Bao Rui, Deng Hui, Yi Jianhong
2015, 33(3): 222-231. DOI: 10.3969/j.issn.1001-3784.2015.03.013
Abstract PDF
North America's PM industry:The challenges of an evolving automotive market
,
2015, 33(3): 232-237. DOI: 10.3969/j.issn.1001-3784.2015.03.014
Abstract PDF