AdvancedSearch

column
Effects of braking velocity on friction properties of Cu-based powder metallurgy friction material
LIU Lian-jun, LI Li, WU Qi-jun, CHE Ming-chao
2018, 36(2): 83-88. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.001
Abstract PDF
Study on the tungsten bulk materials prepared by selective laser melting
XIE Yan-jun, YANG Huai-chao, WANG Xue-bing, ZHAO Lin, KUANG Chun-jiang, HAN Wei
2018, 36(2): 89-95. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.002
Abstract PDF
Electrical conductivity and tensile properties of low content SiC-Cu composite by in situ synthesis
FAN Tao, DING Xiang-qi, DUAN Chun-mei, WU Xin-yu, ZHANG Rui-min, ZHANG Ju-cheng, TANG Wei-zhong, JIA Cheng-chang
2018, 36(2): 96-99. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.003
Abstract PDF
Effect of WC mass fraction on the microstructure and properties of Ti(C0.7N0.3) -based cermets
LI Chao, LI Nan, LIU Xue-quan, LIN Fei, LI Fa-zhang, DING Cun-guang, LI Jin-pu
2018, 36(2): 100-105. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.004
Abstract PDF
Study of TiC particle-reinforced Cu matrix composites
LI Yue-ying, NI Kai-yu, ZHU Fu-wen
2018, 36(2): 106-110. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.005
Abstract PDF
Analysis on dynamic mechanics performance of metal powders by impact loading
LUO Xiao-long, LIU Jun, HU Xian-ping
2018, 36(2): 111-117. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.006
Abstract PDF
Preparation and abrasive wear characteristics of orderly arrayed diamond saw blades
WANG Jian, ZHANG Feng-lin, NIU Liang, ZHOU Yu-mei
2018, 36(2): 118-123. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.007
Abstract PDF
Preparation of porous magnesium bulk as bone substitute implant by spark plasma sintering using sublimate material as pore-forming agent
FENG Wei, CHEN Yu, DENG Pei-xin, ZHU Xiao-dong, KONG Qing-quan, FU Chao-kun, TU Pei-pei
2018, 36(2): 124-129. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.008
Abstract PDF
Synthesis and enhanced photocatalytic activity of TiO2 pillared graphene nanocomposites
CENG Xiong-feng, WANG Meng-huan, LU Yan-li, ZHANG Wen-li, CHEN Lang
2018, 36(2): 130-136. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.009
Abstract PDF
Influence of annealing process on the metallography of CuPb10Sn10 bearing material
PENG Lin, LI Jia
2018, 36(2): 137-140. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.010
Abstract PDF
Processing and optimization of copper-based powder metallurgy synchronizing ring for double cone synchronizer
WEI Jia
2018, 36(2): 141-147. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.011
Abstract PDF
Simulation research on flow field characteristics of atomizing nozzle by circular seam air impact
MA Hai-ying, ZHANG Peng, GUO Zhi-jun
2018, 36(2): 148-152. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.012
Abstract PDF
Characteristics and optimization on the short recycling process of scrap cemented carbide
QIN Tian, JI Zhen, JIA Cheng-chang, BO Hui-ning, CHEN Ming-ying, LIU Bo-wen
2018, 36(2): 153-158. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.02.013
Abstract PDF