AdvancedSearch
WANG Cheng-yang, TENG Yu-kuo, DONG Di, KANG Ju-lei, LIN Ting. Study on recrystallization behavior of Mo-30W molybdenum alloy[J]. Powder Metallurgy Technology, 2018, 36(6): 418-422. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.06.003
Citation: WANG Cheng-yang, TENG Yu-kuo, DONG Di, KANG Ju-lei, LIN Ting. Study on recrystallization behavior of Mo-30W molybdenum alloy[J]. Powder Metallurgy Technology, 2018, 36(6): 418-422. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.06.003

Study on recrystallization behavior of Mo-30W molybdenum alloy

More Information
  • Corresponding author:

    WANG Cheng-yang, E-mail: wangchengyang@atmcn.com

  • Received Date: May 22, 2018
  • Available Online: September 03, 2021
  • Mo-30 W molybdenum alloy bar was prepared by powder metallurgy technology. The recrystallization behavior of Mo-30 W molybdenum alloy bar was analyzed by using tensile properties measurement, hardness measurement, optical microscope (OM), scanning electron microscope (SEM), and energy dispersive spectrometer (EDS). The results show that, the tensile strength of Mo-30 W molybdenum alloy bar at 1600 ℃ is 170 MPa and the elongation is 10% due to the solid solution strengthening and deformation strengthening of W, the high temperature mechanical properties are significantly improved. In the range of 1300~1500 ℃, the strength and hardness of Mo-30 W molybdenum alloy keep stable and then significantly decrease with the increase of temperature. The Mo-30 W molybdenum alloy are completely recrystallized at 1500 ℃, the tensile strength is 385 MPa, the Vickers hardness is HV10 185, and the tensile strength and hardness value reach the lowest.
  • [1]
    居炎鹏, 王爱琴. 钼合金研究现状. 粉末冶金工业, 2015, 25(4): 58 https://www.cnki.com.cn/Article/CJFDTOTAL-FMYG201504020.htm

    Ju Y P, Wang A Q. Current research status of Mo alloys. Powder Metall Ind, 2015, 25(4): 58 https://www.cnki.com.cn/Article/CJFDTOTAL-FMYG201504020.htm
    [2]
    刘辉, 巨建辉, 张军良, 等. 钼合金的强韧化与发展趋势. 中国钼业, 2011, 35(2): 26 DOI: 10.3969/j.issn.1006-2602.2011.02.007

    Liu H, Ju J H, Zhang J L, et al. Strengthening and toughening of molybdenum alloy and its development trend. China Molybd Ind, 2011, 35(2): 26 DOI: 10.3969/j.issn.1006-2602.2011.02.007
    [3]
    刘刚, 张国君, 江峰, 等. 高性能钼合金的微观组织设计制备与性能优化. 中国材料进展, 2016, 35(3): 205 https://www.cnki.com.cn/Article/CJFDTOTAL-XJKB201603008.htm

    Liu G, Zhang G J, Jiang F, et al. Microstructural design and property optimization of Mo alloys with high performance. Mater China, 2016, 35(3): 205 https://www.cnki.com.cn/Article/CJFDTOTAL-XJKB201603008.htm
    [4]
    王东辉, 袁晓波, 李中奎, 等. 钼及钼合金研究与应用进展. 稀有金属快报, 2006, 25(3): 30 DOI: 10.3969/j.issn.1674-3962.2006.03.006

    Wang D H, Yuan X B, Li Z K, et al. Progress of research and application for Mo metal and its alloys. Rare Met Lett, 2006, 25(3): 30 DOI: 10.3969/j.issn.1674-3962.2006.03.006
    [5]
    董帝, 王承阳. 钼合金制备工艺的研究进展. 粉末冶金技术, 2017, 35(4): 304 https://www.cnki.com.cn/Article/CJFDTOTAL-FMYJ201704011.htm

    Dong D, Wang C Y. Research progress on preparation technology of molybdenum alloy. Powder Metall Technol, 2017, 35(4): 304 https://www.cnki.com.cn/Article/CJFDTOTAL-FMYJ201704011.htm
    [6]
    Bianco R, Buckman R W Jr. Mechanical properties of oxide dispersion strengthened(ODS)molybdenum alloys//TMS Annual Meeting Molybdenum and Molybdenum Alloys. San Antonio, 1998: 125. http://digital.library.unt.edu/ark:/67531/metadc708585/
    [7]
    徐克玷. 钼的材料科学与工程. 北京: 冶金工业出版社, 2014
    [8]
    沈观清. 钼钨制品在现代玻璃工业中的应用. 玻璃与搪瓷, 2005, 33(5): 54 https://www.cnki.com.cn/Article/CJFDTOTAL-BLTC200505013.htm

    Shen G Q. The use of molybdenum and wolframium products in modernized glass industry. Glass Enamel, 2005, 33(5): 54 https://www.cnki.com.cn/Article/CJFDTOTAL-BLTC200505013.htm
    [9]
    朱琦, 王林, 杨秦莉, 等. 钼钨合金的组织和性能研究. 中国钼业, 2013, 37(5): 49 DOI: 10.3969/j.issn.1006-2602.2013.05.011

    Zhu Q, Wang L, Yang Q L, et al. Study on microstructure and properties of molybdenum tungsten alloy. China Molybd Ind, 2013, 37(5): 49 DOI: 10.3969/j.issn.1006-2602.2013.05.011
    [10]
    吕忠, 邢英华, 吴德光. 钼钨合金的生产工艺和性能. 中国钼业, 1991(2): 18 https://www.cnki.com.cn/Article/CJFDTOTAL-ZGMY199102008.htm

    Liu Z, Xing Y H, Wu D G. Production process and properties of molybdenum tungsten alloy. China Molybd Ind, 1991(2): 18 https://www.cnki.com.cn/Article/CJFDTOTAL-ZGMY199102008.htm
    [11]
    牛荣梅. 退火处理对变形高纯钼棒显微组织和力学性能的影响, 西安: 西安交通大学, 2004

    Niu R M. The Influence of Annealing on the Microstructure and Mechanical Properties of Deformed High Pure Mo Bars[Dissertation]. Xi'an: Xi'an Jiaotong University, 2004
    [12]
    付静波, 杨秦莉, 庄飞, 等. TZM合金与纯钼性能对比研究. 中国钼业, 2013, 37(4): 30 DOI: 10.3969/j.issn.1006-2602.2013.04.009

    Fu J B, Yang Q L, Zhuang F, et al. Study on the properties of TZM alloy compared with pure Mo. China Molybd Ind, 2013, 37(4): 30 DOI: 10.3969/j.issn.1006-2602.2013.04.009
  • Related Articles

    [1]ZHANG Xiuling, CHEN Yuhong, QI Wubin, ZHANG Qiang, HAI Wanxiu. Densification and physical properties of SiC-diamond polycrystalline materials produced by pressureless sintering[J]. Powder Metallurgy Technology, 2024, 42(2): 165-169, 176. DOI: 10.19591/j.cnki.cn11-1974/tf.2021090009
    [2]WAN Lin, ZHANG Jifeng, SUN Lu, QIU Tianxu, SHEN Xiaoping. Effects of C and Cr contents on microstructure and physical properties of powder forged Fe–Cu–C–Cr alloys[J]. Powder Metallurgy Technology, 2023, 41(6): 508-515. DOI: 10.19591/j.cnki.cn11-1974/tf.2020090001
    [3]ZHANG Chen-zeng, CHEN Cun-guang, LI Pei, LU Tian-xing, YANG Fang, GUO Zhi-meng. Microstructure and properties of Cu‒Fe alloys prepared by powder metallurgy[J]. Powder Metallurgy Technology, 2022, 40(2): 139-144. DOI: 10.19591/j.cnki.cn11-1974/tf.2021040009
    [4]CHEN Jin, XIONG Ning, GE Qi-lu, WANG Tie-jun, CAI Jing, LIU Gui-Rong. Fabrication and properties of large size aluminum-based boron carbide composites by hot isostatic pressing[J]. Powder Metallurgy Technology, 2020, 38(2): 132-137. DOI: 10.19591/j.cnki.cn11-1974/tf.2020.02.008
    [5]ZHANG Bing-qing, WANG Qi, WANG Sui, WANG Hua-lei, JIANG Feng, SUN Jun. Study on the microstructure and properties of powder-forged gear materials[J]. Powder Metallurgy Technology, 2020, 38(2): 113-120. DOI: 10.19591/j.cnki.cn11-1974/tf.2020.02.005
    [6]ZHANG Ren, WANG Xu-lei, HE Xin-bo. Effect of Cr coating on microstructure and properties of graphite flake/Cu composites[J]. Powder Metallurgy Technology, 2019, 37(4): 248-254. DOI: 10.19591/j.cnki.cn11-1974/tf.2019.04.002
    [7]ZHOU Qiang, WEI Shi-chao, YANG Shu-zhong, LUO Li, CHANG De-min. Preparation of FeCuNiSnCo powder by mechanical alloying and the research on physical properties of its matrix material[J]. Powder Metallurgy Technology, 2019, 37(1): 30-35. DOI: 10.19591/j.cnki.cn11-1974/tf.2019.01.005
    [8]NI Feng, FU Li-hua, DENG Pan, WU Peng-fei. Effects of SiO2-B2O3-Al2O3 scaling powder on microstructures and properties of Cu-C-SnO2 porous materials sintered by powders[J]. Powder Metallurgy Technology, 2018, 36(5): 335-341. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.05.003
    [9]LIU Gui-min, DU Lin-fei, YAN Tao, ZHU Shuo, HUI Yang. Effect of rare earth Ce on the microstructure and properties of Cu-Al2O3 composites[J]. Powder Metallurgy Technology, 2018, 36(3): 196-200, 216. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.03.006
    [10]Thermophysical Properties of ZrCp/W Composites Prepared by Hot-pressing[J]. Powder Metallurgy Technology, 2002, 20(5): 263-266. DOI: 10.3321/j.issn:1001-3784.2002.05.001
  • Cited by

    Periodical cited type(17)

    1. 蔡锦文,冯可芹,王海波,刘艳芳,陈思潭. 表面修饰石墨烯制备工艺及其在金属材料中的应用研究. 材料导报. 2024(01): 158-163 .
    2. 陈施润,陈文革,钱颖,张辉. 稀土铈改性石墨烯/水性环氧树脂复合涂料涂装技术研究. 中国腐蚀与防护学报. 2024(01): 107-118 .
    3. 张可萌,柳培,王杰,侯博,刘振伟,高岩. Cu-(石墨烯/6063Al)复合材料的设计制备及组织性能研究. 粉末冶金工业. 2024(02): 75-80 .
    4. 冯俊俊,张会,李亚鹏,段瑾瑜,刘禹,蒲卓林. 石墨烯负载铜增强铜基块体复合材料的制备及其性能. 复合材料学报. 2023(01): 485-498 .
    5. 施琴,朱和军. 银包覆过渡族金属硒化物的制备及银基复合材料性能. 粉末冶金技术. 2023(06): 536-542 . 本站查看
    6. 陈华强,陶应啟,李晓静,吴云洪,王吉应,叶墨稼,余贤旺. 化学气相沉积法及机械混合法添加石墨烯对铜铬触头性能的影响. 功能材料. 2023(12): 12148-12153+12162 .
    7. 陈伟光,刘娟. 添加剂对传感器用PCB环氧树脂板真空蒸镀铜层参数优化及结构的影响. 材料保护. 2022(01): 159-164 .
    8. 李慧莹,王玄玉,孙淑宝,刘志龙,董文杰. 镀镍石墨烯制备及红外干扰性能. 含能材料. 2022(12): 1213-1218 .
    9. 文国富,梁艳娟,王秀飞,伊春强,尹彩流,蒙洁丽. 球磨参数对石墨烯增强铜基复合材料性能的影响. 润滑与密封. 2021(01): 103-110 .
    10. 马强,王健,韦琪龙,路承功,魏智强. 碳包覆CdS纳米颗粒的光学性能研究. 粉末冶金技术. 2021(01): 54-61 . 本站查看
    11. 梁燕,王献辉,李航宇,倪菁艺,金千贺. 石墨烯增强铜基复合材料的制备及研究现状. 稀有金属材料与工程. 2021(07): 2607-2619 .
    12. 施琴,朱和军. 银/石墨烯复合润滑添加剂对于润滑油摩擦性能的影响. 粉末冶金技术. 2020(04): 257-261+274 . 本站查看
    13. 赵敬,彭倚天. 石墨烯表面化学镀铜及铜/石墨烯复合材料的性能研究. 电镀与涂饰. 2020(21): 1481-1485 .
    14. 冯孟奇,贾淑果,李韶林,宋克兴,国秀花,张祥峰,林焕然. 铜/碳复合材料的研究进展. 材料热处理学报. 2020(12): 25-36 .
    15. 刘宇宁,彭冬冬,张辉,甘春雷. 烧结压力对石墨烯增强铜基复合材料组织性能的影响. 功能材料. 2019(01): 1183-1187+1191 .
    16. 郭申申,凤仪,赵浩,钱刚,张学斌. 石墨烯增强铜基复合材料的制备及其微观组织与性能研究. 金属功能材料. 2019(04): 16-22 .
    17. 巩正奇,王灿明,崔洪芝,张文娅. 石墨烯对激光熔覆镍基碳化钨涂层组织及性能影响. 粉末冶金技术. 2019(05): 323-331 . 本站查看

    Other cited types(8)

Catalog

    Article Metrics

    Article views (533) PDF downloads (48) Cited by(25)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return