AdvancedSearch
Volume 39 Issue 2
Apr.  2021
Turn off MathJax
Article Contents
Abstract
References
ZENG Zhao-feng, ZHOU Bo-tao, XIONG Xuan-wen, LI Xiang, LI Zhu-long, WANG Guo-qiang. Research progress of SiCp/Cu composites[J]. Powder Metallurgy Technology, 2021, 39(2): 184-190. DOI: 10.19591/j.cnki.cn11-1974/tf.2020080015
Citation: ZENG Zhao-feng, ZHOU Bo-tao, XIONG Xuan-wen, LI Xiang, LI Zhu-long, WANG Guo-qiang. Research progress of SiCp/Cu composites[J]. Powder Metallurgy Technology, 2021, 39(2): 184-190. DOI: 10.19591/j.cnki.cn11-1974/tf.2020080015
shu

Research progress of SiCp/Cu composites

  • 1.

    School of Physics and Electronic Engineering, Hanjiang Normal University, Shiyan 442000, China

  • 2.

    Center for Research on the Preparation and Properties of New Function Materials, Hanjiang Normal University, Shiyan 442000, China

More Information
  • Corresponding author:

    ZENG Zhao-feng, Email: 524760608@qq.com

  • Received Date: August 23, 2020
  • Available Online: March 26, 2021
    Graphical Abstract
    • Abstract
  • SiCp/Cu particle-reinforced Cu-matrix composites are the current hotspots of the metal-ceramic composites. The main preparation methods of the SiCp/Cu particle-reinforced composites were introduced in this paper and the advantages and disadvantages were compared. The main factors which affected the performance of the SiCp/Cu particle-reinforced composites were analyzed, including the content of SiCp particles, the size of SiCp particles, and the sintering process. The existing problems of the SiCp/Cu particle-reinforced composite materials were proposed. The selection principles of the preparation methods and processes were summarized, and the development direction was prospected.
    • FullText(HTML)
    • References (41)
  • [1]
    Celebi E G, Ipek M, Zeytin S, et al. An investigation of the effect of SiC particle size on CuüSiC composites. Composites Part B, 2012, 43(4): 1813 DOI: 10.1016/j.compositesb.2012.01.006
    [2]
    Zhang L, Qu X H, He X B, et al. Thermo-physical and mechanical properties of high volume fraction SiCp/Cu composites prepared by pressureless infiltration. Mater Sci Eng A, 2008, 489(1-2): 285 DOI: 10.1016/j.msea.2007.12.028
    [3]
    Gan K K, Gu M Y. Mechanical alloying process and mechanical properties of Cu‒SiCp composite. Mater Sci Technol, 2006, 22(8): 960 DOI: 10.1179/174328406X102363
    [4]
    Wang L D, Xue Z W, Qiao Y J, et al. Anisotropic thermal expansion behaviors of copper matrix in β-eucryptite/copper composite. Mater Sci Eng B, 2012, 177(11): 873 DOI: 10.1016/j.mseb.2012.03.036
    [5]
    Celebi E G, Yener T, Altinsoy I, et al. The effect of sintering temperature on some properties of Cu‒SiC composite. J Alloys Compd, 2011, 509(20): 6036 DOI: 10.1016/j.jallcom.2011.02.170
    [6]
    王德宝, 吴玉程, 王文芳, 等. 不同粒度SiCp增强铜基复合材料拉伸性能及断裂机制的研究. 功能材料, 2008, 39(3): 426

    Wang D B, Wu Y C, Wang W F, et al. Research on tensile properties and fracture mechanism of different sizes SiCp reinforced Cu matrix composites. J Funct Mater, 2008, 39(3): 426
    [7]
    Zou G Z, Cao M S, Lin H B, et al. Nickel layer deposition on SiC nanoparticles by simple electroless plating and its dielectric behaviors. Powder Technol, 2006, 168(2): 84 DOI: 10.1016/j.powtec.2006.07.002
    [8]
    Hong S, Lee H, Lee J, et al. Highly stretchable and transparent metal nanowire heater for wearable electronics applications. Adv Mater, 2015, 27(32): 4744 DOI: 10.1002/adma.201500917
    [9]
    Akramifard H R, Shamanian M, Sabbaghian M, et al. Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing. Mater Des, 2014, 54(2): 838
    [10]
    Yih P, Chung D D L. Silicon carbide whisker copper-matrix composites fabricated by hot pressing copper coated whiskers. J Mater Sci, 1996, 31: 399 DOI: 10.1007/BF01139157
    [11]
    Yih P, Chung D D L. A comparative study of the coated filler method and the admixture method of powder metallurgy for making metal-matrix composites. J Mater Sci, 1997, 32(11): 2873 DOI: 10.1023/A:1018624517297
    [12]
    王海龙, 张锐, 乔祝云. 化学镀法制备SiC/Cu金属陶瓷复合粉体工艺的研究. 佛山陶瓷, 2003(11): 14 DOI: 10.3969/j.issn.1006-8236.2003.11.005

    Wang H L, Zhang R, Qiao Z Y. Study on fabrication of SiC/Cu composite powder by chemical plating. Foshan Ceram, 2003(11): 14 DOI: 10.3969/j.issn.1006-8236.2003.11.005
    [13]
    刘猛, 白书欣, 李顺, 等. 界面改性对SiCp/Cu复合材料热物理性能的影响. 材料工程, 2016, 44(8): 11 DOI: 10.11868/j.issn.1001-4381.2016.08.002

    Liu M, Bai S X, Li S, et al. Effect of interfacial modifying on thermo-physical properties of SiCp/Cu composites. J Mater Eng, 2016, 44(8): 11 DOI: 10.11868/j.issn.1001-4381.2016.08.002
    [14]
    Narciso J, Weber L, Molina J M, et al. Reactivity and thermal behaviour of Cu‒Si/SiC composites: effects of SiC oxidation. Mater Sci Technol, 2006, 22(12): 1464 DOI: 10.1179/174328406X131000
    [15]
    胡翠欣. 放电等离子法制备SiC/Cu复合材料及其性能研究[学位论文]. 上海: 华东理工大学, 2013

    Hu C X. Study on Properties of SiC/Cu Composite Prepared by Spark Plasma Sintering [Dissertation]. Shanghai: East China University of Science and Technology, 2013
    [16]
    谷万里, 吕卫卫. SiCp/Cu纳米复合材料的制备, 纳米材料在传统产业中的应用//中国材料研究学会会议论文集. 烟台, 2005: 479

    Gu W L, Lü W W. Preparation of SiCp/Cu nanocomposite, application of nano materials in traditional industries // Proceedings of China Society for Materials Research. Yantai, 2005: 479
    [17]
    Akbarpour M R, Salahi E, Alikhani H F, et al. Microstructure and compressibility of SiC nanoparticles reinforced Cu nanocomposite powders processed by high energy mechanical milling. Ceram Int, 2014, 40(1): 951 DOI: 10.1016/j.ceramint.2013.06.091
    [18]
    章林, 曲选辉, 段柏华, 等. SiCp/Cu复合材料的SPS烧结及组织性能. 稀有金属, 2008, 32(5): 614 DOI: 10.3969/j.issn.0258-7076.2008.05.015

    Zhang L, Qu X H, Duan B H, et al. Study on microstructure and properties of SiCp/Cu composites fabricated by spark plasma sintering. Chin J Rare Met, 2008, 32(5): 614 DOI: 10.3969/j.issn.0258-7076.2008.05.015
    [19]
    胡翠欣, 张修庆, 吕玉廷, 等. 放电等离子法制备SiC/Cu复合材料及其性能研究. 热加工工艺, 2013, 42(6): 117

    Hu C X, Zhang X Q, Lü Y T, et al. Study on properties of SiC/Cu composite prepared by spark plasma sintering. Hot Working Technol, 2013, 42(6): 117
    [20]
    Barmouz M, Givi M K B. Fabrication of in situ Cu/SiC composites using multi-pass friction stir processing: Evaluation of microstructural, porosity, mechanical and electrical behavior. Composites Part A, 2011, 42(10): 1445 DOI: 10.1016/j.compositesa.2011.06.010
    [21]
    潘成刚, 吴竹, 丁紫正, 等. 激光熔覆Cu包SiCp/Ni35覆层组织及磨损性能. 表面技术, 2017, 46(12): 110

    Pan C G, Wu Z, Ding Z Z, et al. Microstructure and wear properties of Cu-coated SiCp/Ni35 coating by laser cladding. Surf Technol, 2017, 46(12): 110
    [22]
    范冰冰, 关莉, 李凯, 等. SiC组分含量对SiC/Cu复合材料力学性能的影响. 硅酸盐通报, 2009, 29(增刊 1): 114

    Fan B B, Guan L, Li K, et al. Influence of SiC content on the mechnical properties of SiC/Cu composites. Bull Chin Ceram Soc, 2009, 29(Suppl 1): 114
    [23]
    侯宝峰, 曲选辉, 何新波, 等. SiC含量对注射成形SiCp/Cu复合材料磨损性能的影响. 机械工程材料, 2012, 34(12): 67

    Hou B F, Qu X H, He X B, et al. Effect of SiC content on wear properties of SiCp/Cu composite fabricated by injection molding. Mater Mech Eng, 2012, 34(12): 67
    [24]
    刘有金, 张云龙, 高晶, 等. SiC颗粒尺寸对SiCp/Cu基复合材料热膨胀数的影响. 兵器材料科学与工程, 2013, 36(1): 118 DOI: 10.3969/j.issn.1004-244X.2013.01.036

    Liu Y J, Zhang Y L, Gao J, et al. Effect of SiC particle size on thermal expansion coefficients of SiCp/Cu composites. Ordn Mater Sci Eng, 2013, 36(1): 118 DOI: 10.3969/j.issn.1004-244X.2013.01.036
    [25]
    张洁, 许晓静, 陈康敏, 等. SiCp尺寸对SiCp/Cu基复合材料抗磨性能的影响. 摩擦学学报, 2003, 23(4): 301 DOI: 10.3321/j.issn:1004-0595.2003.04.009

    Zhang J, Xu X J, Chen K M, et al. Effect of SiCp size on wear-resistance of SiCp/Cu matrix composite. Tribology, 2003, 23(4): 301 DOI: 10.3321/j.issn:1004-0595.2003.04.009
    [26]
    朱德智. SiCp/Cu复合材料组织与性能研究[学位论文]. 哈尔滨: 哈尔滨理工大学, 2005

    Zhu D Z. Microstructure and Properties Investigation of SiCp/Cu Composites [Dissertation]. Harbin: Harbin University of Science and Technology, 2005
    [27]
    王常春. 电子封装用SiCp/Cu复合材料的微观组织与性能研究[学位论文]. 济南: 山东大学, 2007

    Wang C C. Microstructure and Properties of SiCp/Cu Composites for Electronic Packaging [Dissertation]. Jinan: Shandong University, 2007
    [28]
    王海龙, 张锐, 刘锁兵, 等. 烧结工艺对SiC/Cu‒Al复合材料的力学性能及断裂行为的影响. 硅酸盐学报, 2006, 34(11): 1315 DOI: 10.3321/j.issn:0454-5648.2006.11.005

    Wang H L, Zhang R, Liu S B, et al. Effects of sintering process on mechanical properties and fracture behavior of SiC/Cu‒Al composites. J Chin Ceram Soc, 2006, 34(11): 1315 DOI: 10.3321/j.issn:0454-5648.2006.11.005
    [29]
    刘凰. W‒SiCp/Cu复合材料的热压烧结制备及其性能研究[学位论文]. 武汉: 武汉理工大学, 2014

    Liu H. Fabrication and Properties of W‒SiCp/Cu Composites by Hot Pressing Sintering [Dissertation]. Wuhan: Wuhan University of Technology, 2014
    [30]
    唐丽丽, 单琳, 丁佩岭, 等. 高体积分数β-SiCp/Cu复合材料的制备及性能研究. 热加工工艺, 2015, 44(8): 118

    Tang L L, Shan L, Ding P L, et al. Study on fabrication and properties of high volume fraction β-SiCP/Cu composite. Hot Working Technol, 2015, 44(8): 118
    [31]
    孙冰, 杨硕, 谢斌, 等. 非晶相界面SiC/Cu复合材料的制备. 硅酸盐学报, 2019, 47(1): 98

    Sun B, Yang S, Xie B, et al. Preparation of SiC/Cu composites with an amorphous grain boundary. J Chin Ceram Soc, 2019, 47(1): 98
    [32]
    Sundberg G, Paul P, Sung C, et al. Fabrication of Cu/SiC metal matrix composites. J Mater Sci, 2006, 41(2): 485 DOI: 10.1007/s10853-005-2622-3
    [33]
    Marín J, Olivares L, Ordoñez S, et al. Wetting of silicon carbide by Cu‒Si alloys. Mater Sci Forum, 2003, 416(4): 487
    [34]
    Rado C, Drevet B, Eustathopoulos N. The role of compound formation in reactive wetting: the Cu/SiC system. Acta Mater, 2000, 48(18-19): 4483 DOI: 10.1016/S1359-6454(00)00235-4
    [35]
    Shimbo M, Naka M, Okamoto I. Wettability of silicon carbide by aluminium, copper and silver. J Mater Sci Lett, 1989, 8(6): 663 DOI: 10.1007/BF01730435
    [36]
    An Z, Ohi A, Hirai M, et al. Study of the reaction at Cu/3C‒SiC interface. Surf Sci, 2001, 493(1-3): 182 DOI: 10.1016/S0039-6028(01)01211-0
    [37]
    Schubert T, Brendel A, Schmid K. Interfacial design of Cu/SiC composites prepared by powder metallurgy for heat sink applications. Composites Part A, 2007, 38(12): 2398 DOI: 10.1016/j.compositesa.2007.08.012
    [38]
    Gan K K, Gu M Y, Mu G H. Effect of Fe on the properties of Cu/SiCp composite. J Mater Sci, 2008, 43: 1318 DOI: 10.1007/s10853-007-2294-2
    [39]
    周永欣, 徐飞, 吕振林, 等. SiC和石墨颗粒混杂增强铜基复合材料的摩擦磨损性能. 机械工程材料, 2015, 39(2): 90

    Zhou Y X, Xu F, Lü Z L, et al. Friction and wear properties of Cu matrix composites hybrid reinforced with SiC and graphite particles. Mater Mech Eng, 2015, 39(2): 90
    [40]
    代巧飞. SiC/Cu复合材料界面玻璃相修饰及性能研究[学位论文]. 郑州: 郑州大学, 2018

    Dai Q F. Investigation on Interfacial Glass Phase Modification and Properties of SiC/Cu Composites [Dissertation]. Zhengzhou: Zhengzhou University, 2018
    [41]
    Chen L C. Review of preparation and optoelectronic characteristics of Cu2O-based solar cells with nanostructure. Mater Sci Semicond Process, 2013, 16(5): 1172 DOI: 10.1016/j.mssp.2012.12.028
    • Related Articles

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (495) PDF downloads (60) Cited by()
    Related

    Website Copyright Editorial Office of Powder Metallurgy Technology京ICP备13030111号

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return