| Citation: |
PENG Erbao, MA Xiao. Microstructure and mechanical properties of nanoscale xSiC/Mg‒5.5Zn‒0.1Y alloys by solid phase synthesis[J]. Powder Metallurgy Technology, 2023, 41(2): 149-153. DOI: 10.19591/j.cnki.cn11-1974/tf.2020110009
|
The Mg‒5.5Zn‒0.1Y alloys reinforced by the nanoscale SiC particles were prepared by solid phase synthesis, and the effect of SiC particle mass fraction on the microstructure and mechanical properties of Mg‒5.5Zn‒0.1Y alloys was investigated. The results show that, the distribution of SiC particles becomes more uniform with the increase of SiC particle mass fraction, which results in the significant napping and grain refinement. A large number of dislocations occur in the vicinity of SiC particles in the Mg‒5.5Zn‒0.1Y alloys doped by SiC particles in the mass fraction of 2.0%, which provide the favorable conditions for the recrystallization nucleation and promote the grain refinement. Increasing the SiC particle mass fraction can increase the hardness of alloys. When the SiC particle mass fraction is 2.0%, the Mg‒5.5Zn‒0.1Y alloys achieve the maximum hardness as HV 82. When the SiC particle mass fraction is increased, the number of cracks is reduced, the interface between the SiC particles and Mg‒5.5Zn‒0.1Y alloys is de-bonded, the crack source is formed, and the fracture is caused. The higher SiC particle mass fraction can make the alloys obtain the higher strength and elongation.
| [1] |
盛绍顶, 陈鼎, 陈振华, 等. 快速凝固/粉末冶金AZ91/SiCp镁基复合材料的相组成及界面. 中国有色金属学报, 2008, 18(7): 1185
Shen S D, Chen D, Chen Z H, et al. Phase composition and interface of rapidly solidified/powder metallurgy AZ91/SiCp Mg-based composite material. Chin J Nonferrous Met, 2008, 18(7): 1185
|
| [2] |
任峰岩, 许磊, 历长云, 等. 粉末冶金法制备颗粒增强镁基复合材料的研究进展. 粉末冶金技术, 2020, 38(1): 66 DOI: 10.19591/j.cnki.cn11-1974/tf.2020.01.010
Ren F Y, Xu L, Li C Y, et al. Research progress in the preparation of particle-reinforced magnesium matrix composites by powder metallurgy. Powder Metall Technol, 2020, 38(1): 66 DOI: 10.19591/j.cnki.cn11-1974/tf.2020.01.010
|
| [3] |
关锋, 程军丽. Y添加量对齿轮用真空感应熔炼ZK60合金组织及拉伸性能的影响. 真空科学与技术学报, 2020, 40(10): 978
Guan F, Cheng J L. Property modification of ZK60 Al‒Mg alloy by Y-doping. Chin J Vac Sci Technol, 2020, 40(10): 978
|
| [4] |
彭鹏, 汤爱涛, 佘加, 等. 超细晶镁合金的研究现状及展望. 材料导报, 2019, 33(9): 1526 DOI: 10.11896/cldb.18010063
Peng P, Tang A T, She J, et al. Ultrafine grained magnesium alloys research: status quo and future directions. Mater Rep, 2019, 33(9): 1526 DOI: 10.11896/cldb.18010063
|
| [5] |
于海华, 郭志猛, 罗骥, 等. 烧结温度对SiO2颗粒强化AZ91镁合金组织与性能的影响. 粉末冶金技术, 2014, 32(5): 338
Yu H H, Guo Z M, Luo J, et al. Effect of sintering temperature on the microstructure and properties of SiO2 particles strengthening AZ91 magnesium alloy. Powder Metall Technol, 2014, 32(5): 338
|
| [6] |
Sun X F, Wang C J, Deng K K, et al. Aging behavior of AZ91 matrix influenced by 5 μm SiCp: Investigation on the microstructure and mechanical properties. J Alloys Compd, 2017, 727(5): 1263
|
| [7] |
吴国华, 肖寒, 周慧子, 等. 挤压态AZ31镁合金温热拉伸性能的各向异性. 中国有色金属学报, 2017, 27(1): 57
Wu G H, Xiao H, Zhou H Z, et al. Anisotropy of warm-temperature tensile properties of extruded AZ31 magnesium alloy. Chin J Nonferrous Met, 2017, 27(1): 57
|
| [8] |
Paramsothy M, Chan J, Kwok R, et al. Al2O3 nanoparticle addition to commercial magnesium alloys: multiple beneficial effects. Nanomaterials, 2012, 2(2): 147 DOI: 10.3390/nano2020147
|
| [9] |
Habibnejad-Korayem M, Mahmudi R, Poole W J. Work hardening behavior of Mg-based nano-composites strengthened by Al2O3 nano-particles. Mater Sci Eng A, 2013, 567(4): 89
|
| [10] |
文丽华, 吉泽升, 许红雨, 等. 固相再生Mg‒Nd‒Zn‒Zr镁合金的时效强化. 中国有色金属学报, 2016, 26(7): 1408
Wen L H, Ji Z S, Xu H Y, et al. Aging strengthening of Mg‒Nd‒Zn‒Zr magnesium alloy prepared by solid recycling process. Chin J Nonferrous Met, 2016, 26(7): 1408
|
| [11] |
武淑艳, 吉泽升, 胡明, 等. 固相再生AZ31B镁合金的组织与力学性能. 稀有金属材料与工程, 2018, 47(3): 736 DOI: 10.1016/S1875-5372(18)30101-2
Wu S Y, Ji Z S, Hu M, et al. Microstructure and mechanical properties of AZ31B magnesium alloy prepared by solid state recycling. Rare Met Mater Eng, 2018, 47(3): 736 DOI: 10.1016/S1875-5372(18)30101-2
|
| [12] |
文丽华, 吉泽升, 宁慧燕, 等. 固相合成道次对ZM6‒Ce镁合金组织和性能的影响. 稀有金属材料与工程, 2015, 44(9): 2305
Wen L H, Ji Z S, Ning H Y, et al. Effect of extruding times on microstructure and mechanical properties of ZM6‒Ce magnesium alloy. Rare Met Mater Eng, 2015, 44(9): 2305
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: