AdvancedSearch
LI Guangzhong, WANG Hao, LI Yaning, HUANG Yuanping. Preparation and characterization of Pd/porous Ta/Ta composite membrane[J]. Powder Metallurgy Technology, 2024, 42(6): 632-637. DOI: 10.19591/j.cnki.cn11-1974/tf.2023030002
Citation: LI Guangzhong, WANG Hao, LI Yaning, HUANG Yuanping. Preparation and characterization of Pd/porous Ta/Ta composite membrane[J]. Powder Metallurgy Technology, 2024, 42(6): 632-637. DOI: 10.19591/j.cnki.cn11-1974/tf.2023030002

Preparation and characterization of Pd/porous Ta/Ta composite membrane

More Information
  • Corresponding author:

    LI Guangzhong, E-mail: shlgznin@126.com

  • Received Date: March 07, 2023
  • Available Online: April 16, 2023
  • The porous Ta membrane was prepared on the surface of Ta foils by spraying and sintering. Subsequently, the Pd/porousTa/Ta composite membrane was prepared by electroless Pd plating processes using the porous Ta/Ta as the composite substrate. The effect of sintering temperature on the morphology of porous tantalum films was studied, and the growth behavior of Pd films was analyzed. In the results, the sintering temperature has a significant impact on the structure of porous Ta membrane. The porous Ta membrane with the well-developed sintering neck can be obtained by sintering at 1700 ℃ for 2 h. The electroless plating time has a significant effect on the Pd membrane on the surface of porous Ta membrane. Moreover, due to the complex surface structure of porous Ta membrane, it is difficult to obtain the uniform and dense Pd membrane on the surface of porous Ta membrane.

  • [1]
    于晓明, 谭丽丽, 杨柯. 钽金属的医学应用研究进展. 材料导报, 2012, 26(1): 79 DOI: 10.3969/j.issn.1005-023X.2012.01.018

    Yu X M, Tan L L, Yang K. Application and research progress of tantalum as biomedical materials. Mater Rev, 2012, 26(1): 79 DOI: 10.3969/j.issn.1005-023X.2012.01.018
    [2]
    任志东, 任萍, 李仲香, 等. 超细钽粉制备技术研究. 有色金属(冶炼部分), 2020(10): 60

    Ren Z D, Ren P, Li Z X, et al. Research on preparation technology of ultra-fine Tantalum powder. Nonferrous Met Extr Metall, 2020(10): 60
    [3]
    Wang X J, Xu S Q, Zhou S W, et al. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review. Biomaterials, 2016, 83: 127 DOI: 10.1016/j.biomaterials.2016.01.012
    [4]
    谢盼平, 袁思成, 胡立坤, 等. 高纯钽板的轧制与退火织构. 矿冶工程, 2019, 39(6): 129 DOI: 10.3969/j.issn.0253-6099.2019.06.032

    Xie P P, Yuan S C, Hu L K, et al. Rolling and annealing texture of high-purity tantalum plate. Min Metall Eng, 2019, 39(6): 129 DOI: 10.3969/j.issn.0253-6099.2019.06.032
    [5]
    潘伦桃, 李彬, 郑爱国, 等. 钽在集成电路中的应用. 稀有金属, 2003(1): 28 DOI: 10.3969/j.issn.0258-7076.2003.01.005

    Pan L T, Li B, Zhen A G, et al. Application of tantalum to LSIC. Chin J Rare Met, 2003(1): 28 DOI: 10.3969/j.issn.0258-7076.2003.01.005
    [6]
    Zhu J L, Liu S F, Liu Y H, et al. Deformation and annealing behavior in the ‘interaction zone’ of cold-rolled tantalum sheets. Vacuum, 2019, 164: 105 DOI: 10.1016/j.vacuum.2019.03.015
    [7]
    赵德伟, 李军雷. 多孔Ta的制备及其作为骨植入材料的应用进展. 金属学报, 2017, 53(10): 1303 DOI: 10.11900/0412.1961.2017.00260

    Zhao D W, Li J L. Fabrication of the porous tantalum and its current status used as orthopedics implants materials. Acta Metall Sin, 2017, 53(10): 1303 DOI: 10.11900/0412.1961.2017.00260
    [8]
    张磊, 田东斌, 伍权, 等. 基于多材料打印制备梯度结构电解电容器阳极块. 稀有金属材料与工程, 2020, 49(11): 3909

    Zhang L, Tian D B, Wu Q, et al. Fabrication of gradient electrolytic capacitors anode block based on multi-material printing. Rare Met Mater Eng, 2020, 49(11): 3909
    [9]
    陈长军, 张超, 王晓南, 等. 生物医用多孔钽制备工艺研究进展. 热加工工艺, 2014, 43(4): 5

    Chen C J, Zhang C, Wang X N, et al. Research and development of preparation technology of biomedical porous tantalum. Hot Working Technol, 2014, 43(4): 5
    [10]
    杨坤, 杨广宇, 贾亮, 等. 增材制造钽及多孔钽的研究进展. 稀有金属材料与工程, 2022, 51(10): 3922

    Yang K, Yang G Y, Jia L, et al. Research progress of additive manufacturing of tantalum and porous tantalum components. Rare Met Mater Eng, 2022, 51(10): 3922
    [11]
    康新婷, 李亚宁, 李广忠, 等. 烧结温度对多孔钽性能影响. 稀有金属材料与工程, 2017, 46(4): 1092

    Kang X T, Li Y N, Li G Z, et al. Effect of sintering temperature on properties of tantalum porous materials. Rare Met Mater Eng, 2017, 46(4): 1092
    [12]
    李广忠, 李亚宁, 王昊, 等. 一种多孔钽膜的制备方法: 中国专利, 202111059233.5. 2022-9-2

    Li G Z, Li Y N, Wang H, et al. The Invention Relates to a Preparation Method of a Porous Tantalum Film: China Patent, 202111059233.5. 2022-9-2
    [13]
    Yun S, Ted Oyama S T. Correlations in palladium membranes for hydrogen separation: A review. J Membr Sc, 2011, 375(1-2): 28 DOI: 10.1016/j.memsci.2011.03.057
    [14]
    Nayebossadri S, Fletcher S, Speight J D, et al. Hydrogen permeation through porous stainless steel for palladium-based composite porous membranes. J Membr Sci, 2016, 515: 22 DOI: 10.1016/j.memsci.2016.05.036
    [15]
    Young S J, Chan H L, Seong Y K, et al. Characterization of a Pd/Ta composite membrane and its application to a large scale high-purity hydrogen separation from mixed gas. Sep Purif Technol, 2018, 200: 221 DOI: 10.1016/j.seppur.2017.12.019
    [16]
    Shi W, Yang B C, Zhang X H, et al. Effect of sintering time on the microstructure of porous Tantalum. Rare Met Mater Eng, 2015, 44(2): 319 DOI: 10.1016/S1875-5372(15)30027-8
    [17]
    节云峰. 多孔钽的制备及其工艺和性能的研究[学位论文]. 长沙: 中南大学, 2011

    Jie Y F. Study on Preparation and Properties of Porous Tantalum [Dissertation]. Changsha: Central South University, 2011
    [18]
    Medlin D J, Scrafton J, Shetty R. Metallurgical attachment of a porous tantalum foam to a titanium substrate for orthopedic applications. J ASTM Int, 2005, 2(10): 1
    [19]
    Han S R, Nersisyan H, Park KT, et al. Porous tantalum network structures exhibiting high electrochemical performance as capacitors. J Energy Stor, 2021, 34: 102222 DOI: 10.1016/j.est.2020.102222
    [20]
    李钒, 夏定国, 王习东. 化学镀的物理化学基础与实验设计. 北京: 冶金工业出版社, 2011

    Li F, Xia D G, Wang X D. Theory of Physical Chemistry Basis and Experimental Design of Electroless Plating. Beijing: Metallurgical Industry Press, 2011
  • Related Articles

    [1]HE Xuemin, WANG Guishan, LI Yinghong, SHI Meijuan. Pitting corrosion behavior of pure copper components in EHV/UHV DC transmission environment[J]. Powder Metallurgy Technology, 2024, 42(1): 91-96. DOI: 10.19591/j.cnki.cn11-1974/tf.2020110003
    [2]Study on microstructure and high-temperature corrosion resistance to melt-salts of LDED High-Cr Ni-base alloy with low melting point[J]. Powder Metallurgy Technology. DOI: 10.19591/j.cnki.cn11-1974/tf.2024100012
    [3]NI Xiaoqing, ZHANG Liang, WU Wenheng, KONG Decheng, WEN Ying, WANG Li, DONG Chaofang. Effect of electrochemical polishing on surface quality and corrosion resistance of Ti6Al4V crowns fabricated by selective laser melting[J]. Powder Metallurgy Technology, 2023, 41(6): 528-535, 542. DOI: 10.19591/j.cnki.cn11-1974/tf.2021110011
    [4]GUO Yang, HU Li-ming. Effect of graphene oxide on the corrosion resistance and electromagnetic propertiese of FeSiAl alloy powders[J]. Powder Metallurgy Technology, 2021, 39(6): 520-525. DOI: 10.19591/j.cnki.cn11-1974/tf.2021030029
    [5]MIAO Zhen-wang, ZHU Fu-wen, LIU Qi. Study on microstructure and corrosion resistance of CoCrFeNiCuTix high-entropy alloy[J]. Powder Metallurgy Technology, 2020, 38(1): 10-17. DOI: 10.19591/j.cnki.cn11-1974/tf.2020.01.002
    [6]Corrosion Resistance of Ti(C,N)-based Cermet for Surgical Cutting Tools[J]. Powder Metallurgy Technology, 2002, 20(2): 82-85. DOI: 10.3321/j.issn:1001-3784.2002.02.005
    [7]Ye Minghui, Zhao Zhongmin, Du Xinkang, Xin Wentong, Wang Jianjiang. INVESTIGATION ON CORROSION-RESISTANCE OF DOUBLE LINED CERAMIC COMPOSITE PIPES PRODUCED BY GRAVITATIONAL SEPARATION SHS PROCESS[J]. Powder Metallurgy Technology, 2000, 18(2): 106-110.
    [8]Duan Huiping, Wei Yanping, Yin Sheng, Lai Heyi. Investigation on corosion resistance of alloy produced by SHS centrifugal process[J]. Powder Metallurgy Technology, 1998, 16(3): 178-182.
    [9]Huang Jianzhong, Huang Boyun, Lu: Haibo. CHARACTERISTICS AND CORROSION RESISTANT PROPERTY OF HIGH TUNGSTEN HEAVY ALLOY SINTERED AT LOW TEMPERATURE[J]. Powder Metallurgy Technology, 1996, 14(1): 37-43.
    [10]Song Huan, Zhang Song, Zhang Shusheng, Sui Quanming. STUDY ON FLAME SPRAY WELDING BY USING CAST TUNGSTEN CARBIDE ALLOY POWDER PREFORMED COMPACT AND WEAR RESISTANCE[J]. Powder Metallurgy Technology, 1995, 13(4): 259-264.
  • Cited by

    Periodical cited type(1)

    1. 刘杰,李正刚,杨兵. AlCrNbSiTi高熵合金涂层高温水蒸气腐蚀研究. 湖南电力. 2024(02): 29-34 .

    Other cited types(1)

Catalog

    Article Metrics

    Article views (376) PDF downloads (33) Cited by(2)
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return