| Citation: |
WANG Jun, ZHOU Xin, DU Zhong, ZHAO Hongchun, ZHANG Baohong, XIONG Ning. Thermal spraying NiCrAlY alloy powders prepared by close-coupled gas atomization[J]. Powder Metallurgy Technology, 2023, 41(3): 225-233. DOI: 10.19591/j.cnki.cn11-1974/tf.2023040005
|
NiCrAlY alloy powders used for the thermal spraying were fabricated by the closed-coupled gas atomization technology. The physical properties, particle size distribution, powder morphology, internal microstructure, and phase composition of the NiCrAlY alloy powders were investigated. The results show that, most of powders are spherical or nearly spherical particles, the particle size of 85% powders is less than 150 μm. The powder microstructures are mainly composed of dendrites and cellular crystals, and the solidification cooling rate of the powders with the particle size of 25～250 μm is about 4000～67000 K·s−1. The inner structure of the powders with the particle size less than 50 μm is dense, and a small number of particles with the particle size larger than 50 μm show the solidification shrinkage pore and hollow defects. There are Y and Si segregation in the crystal boundary and intracrystalline, and the powder phases are mainly composed of γ'-Ni3Al and γ-Ni solid solution phases.
| [1] |
陈美英, 胡敦元, 孙建刚, 等. 真空雾化法制备MCrAlTaY合金粉末. 热喷涂技术, 2010, 2(1): 27
Chen M Y, Hu D Y, Sun J G, et al. MCrAlTaY alloy powder prepared by vacuum atomization. Therm Spray Technol, 2010, 2(1): 27
|
| [2] |
周圣丰, 刘佳, 熊征, 等. 提高MCrAlY涂层抗高温氧化性能方法的研究进展. 激光与光电子学进展, 2015, 52(12): 120004 DOI: 10.3788/LOP52.120004
Zhou S F, Liu J, Xiong Z, et al. Research progress on improving the high-temperature oxidation resistance of MCrAlY coatings. Laser Optoelectron Prog, 2015, 52(12): 120004 DOI: 10.3788/LOP52.120004
|
| [3] |
Yang H Z, Zou J P, Shi Q, et al. Recent advances for interface diffusion behavior in MCrAlY coatings at elevated temperature oxidation. Rare Met Mater Eng, 2020, 49(7): 2240
|
| [4] |
徐惠彬, 宫声凯, 刘福顺, 等. 航空发动机热障涂层材料体系的研究. 航空学报, 2000, 21(1): 7
Xu H B, Gong S K, Liu F S, et al. Recent development in materials design of thermal barrier coatings for gas turbine. Acta Aeronaut Astronaut Sin, 2000, 21(1): 7
|
| [5] |
常新春, 王建强, 侯万良, 等. 超声雾化NiCoCrAlTaY合金粉末微观结构及涂层高温抗氧化性能. 表面技术, 2000, 29(5): 9
Chang X C, Wang J Q, Hou W L, et al. Microstructure of supersonic gas atomized NiCoCrAlTaY alloy powder and high temperature oxidation resistance of coating. Surf Technol. 2000, 29(5): 9
|
| [6] |
赵新明, 徐骏, 朱学新, 等. 超音速气雾化制备316L不锈钢粉末的表征. 工程科学学报, 2009, 31(10): 1270
Zhao X M, Xu J, Zhu X X, et al. Characterization of 316L stainless steel powders produced by supersonic gas atomization. Chin J Eng, 2009, 31(10): 1270
|
| [7] |
欧阳鸿武, 陈欣, 余文焘, 等. 紧耦合气雾化制备Al基合金非晶粉末的研究. 稀有金属材料与工程, 2006, 35(6): 866
Ouyang H W, Chen X, Yu W T, et al. Preparation of amorphous powders of Al-based alloy by close-coupled gas atomization. Rare Met Mater Eng, 2006, 35(6): 866
|
| [8] |
张强, 郑亮, 许文勇, 等. 氩气雾化镍基粉末高温合金及粉末特性研究进展. 粉末冶金技术, 2022, 40(5): 387
Zhang Q, Zheng L, Xu W Y, et al. Research progress on argon atomized nickel-based powder metallurgy superalloys and powder characteristics. Powder Metall Technol, 2022, 40(5): 387
|
| [9] |
胡本芙. 氩气雾化的FGH95和René95合金粉末的粘结形式. 北京科技大学学报, 1987, 9(增刊 1): 19
Hu B F. The adhering formation of argon-atomized FGH95 and imported René95 superalloy powders. J Univ Sci Technol Beijing, 1987, 9(Suppl 1): 19
|
| [10] |
胡文波, 贾成厂, 胡本芙, 等. 氩气雾化法制备FGH96高温合金粉末颗粒的凝固组织. 粉末冶金材料科学与工程, 2011, 16(5): 671
Hu W B, Jia C C, Hu B F, et al. Solidification microstructure of FGH96 superalloy powder prepared by argon gas atomization. Mater Sci Eng Powder Metall, 2011, 16(5): 671
|
| [11] |
潘杰花, 邹勇志, 曾建民. 二次枝晶臂间距对A357合金时效动力学的影响. 汽车工程, 2009, 31(5): 435
Pan J H, Zou Y Z, Zeng J M. The influences of SDAS on the aging kinetics of A357 alloy. Automot Eng, 2009, 31(5): 435
|
| [12] |
曹镔, 刘祖铭, 王建川, 等. 氩气雾化Sc、Y微合金化René104镍基高温合金粉末的组织与性能. 粉末冶金材料科学与工程, 2023, 28(2): 192
Cao B, Liu Z M, Wang J C, et al. Microstructure and properties of Sc, Y microalloyed René104 nickel-based superalloy powders prepared by argon atomization. Mater Sci Eng Powder Metall, 2023, 28(2): 192
|
| [13] |
农必重, 张亚洲, 刘祖铭, 等. 氩气雾化制备新型镍基高温合金粉末的微观结构和性能. 粉末冶金材料科学与工程, 2021, 26(6): 547
Nong B Z, Zhang Y Z, Liu Z M, et al. Microstrcture and properties of new nickel-based superalloy powder prepared by argon atomization. Mater Sci Eng Powder Metall, 2021, 26(6): 547
|
| [14] |
胡家齐, 王长军, 魏来, 等. VIGA法与PREP法制备不锈钢粉末的内部孔洞对比研究. 粉末冶金工业, 2021, 31(4): 11
Hu J Q, Wang C J, Wei L, et al. A comparative research of porosity in stainless steel powders manufactured by vacuum induction-melting gas atomization and plasma rotating electrode process. Powder Metall Ind, 2021, 31(4): 11
|
| [15] |
赵少阳, 王利卿, 谈萍, 等. VIGA-CC法制备球形Ti–35.8Al–18.4Nb合金粉末及其性能研究. 粉末冶金技术, 2020, 38(6): 443
Zhao S Y, Wang L Q, Tan P, et al. Preparation and properties of spherial Ti–35.8Al–18.4Nb alloy powders by VIGA-CC method. Powder Metall Technol, 2020, 38(6): 443
|
| [16] |
杨乐彪, 任晓娜, 夏敏, 等. 电极感应熔化气雾化粉末特性及液滴尺寸影响因素的研究. 稀有金属材料与工程, 2020, 49(6): 2017
Yang L B, Ren X N, Xia M, et al. Study on powder characteristics and effect factors of droplets size during electrode induction melting gas atomization. Rare Met Mater Eng, 2020, 49(6): 2017
|
| [17] |
高正江, 张国庆, 李周, 等. 氩气雾化高温合金粉末的凝固组织特征. 粉末冶金技术, 2011, 29(2): 93
Gao Z J, Zhang G Q, Li Z, et al. Microstructure characteristics of superalloy powders during rapid solidification prepared by argon atomization. Powder Metall Technol, 2011, 29(2): 93
|
| [18] |
刘祖铭, 黄伯云, 刘咏, 等. 氩气雾化制备Al82Ni10Y8非晶态结构粉末. 中南大学学报(自然科学版), 2004, 35(5): 707
Liu Z M, Huang B Y, Liu Y, et al. Fabrication of Al82Ni10Y8 amorphous structured powders by argon gas atomization. J Cent South Univ Sci Technol, 2004, 35(5): 707
|
| [19] |
王晓明, 朱胜, 杨柏俊, 等. 紧耦合雾化制备Al86Ni6Y4.5Co2La1.5非晶粉末及其表征分析. 稀有金属材料与工程, 2017, 46(9): 2667
Wang X M, Zhu S, Yang B J, et al. Preparation of Al86Ni6Y4.5Co2La1.5 amorphous powder by closed-coupled gas atomization and its characterization analysis. Rare Met Mater Eng, 2017, 46(9): 2667
|
| [20] |
李增峰, 谈萍, 沈垒, 等. Ti–Al–8V–5Fe合金粉末的制备及性能. 粉末冶金技术, 2022, 40(6): 564
Li Z F, Tan P, Shen L, et al. Preparation and characterization of Ti–Al–8V–5Fe alloy powders. Powder Metall Technol, 2022, 40(6): 564
|
| 1. |
钟韬，郭荣臻，林晓川，柳龙婷，王佳鑫，徐志强，郭世柏. 等离子烧结工艺对WC/Cr_3C_2/La_2O_3刀具材料力学性能的影响. 粉末冶金技术. 2024(06): 582-588 .
 本站查看
|
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: