AdvancedSearch
Volume 6 Issue 2
Aug.  2021
Turn off MathJax
Article Contents
Abstract
Related Articles
Li Yuezhu, Dr. Lars Arhberg. MICROSTRUCTURAL CHARACTERISTICS OF RAPIDLY SOLIDIFIED AUSTENITIC STAINLESS STEEL[J]. Powder Metallurgy Technology, 1988, 6(2): 65-68.
Citation: Li Yuezhu, Dr. Lars Arhberg. MICROSTRUCTURAL CHARACTERISTICS OF RAPIDLY SOLIDIFIED AUSTENITIC STAINLESS STEEL[J]. Powder Metallurgy Technology, 1988, 6(2): 65-68.
shu

MICROSTRUCTURAL CHARACTERISTICS OF RAPIDLY SOLIDIFIED AUSTENITIC STAINLESS STEEL

  • 1. Central Steel and Iron Research Institute;

  • 2. Sweden Metal Research Institute

More Information
  • Available Online: August 23, 2021
    Graphical Abstract
    • Abstract
  • Melt-spun Ti-modified 316L stainless steel ribbon exhibits a typical rapid solidification microstructure and homogenious chemical composition. The microstructure consists of fine-scale columnar and equiaxed grains.The cell spacing measured is about 0.2 μm The average cooling rate calculated is 106℃/s. A region of featureless microstructure exists,indicating a high undercooling during solidification.The nucleation undercooling calculated is about 200 K.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]ZHANG Xinyun, GENG Nan, ZHAO Yingxiang, DU Shan, CAO Yan, MENG Junhu, GUO Junde. Tribological behaviour of Cu‒Zn based self-lubricating materials reinforced with rare earth oxide Y2O3[J]. Powder Metallurgy Technology. DOI: 10.19591/j.cnki.cn11-1974/tf.2024010005
    [2]ZHENG Haifei, YIN Yanguo, LI Rongrong. Tribological properties of iron-based bearing materials prepared through FeS surface modification[J]. Powder Metallurgy Technology, 2024, 42(5): 516-524. DOI: 10.19591/j.cnki.cn11-1974/tf.2024050007
    [3]DING Xiaolong, YANG Zhaofang, ZHENG Hejing. Effect of ZrP on properties of CuBi-steel-backed double-layer metal composites[J]. Powder Metallurgy Technology, 2024, 42(2): 128-134. DOI: 10.19591/j.cnki.cn11-1974/tf.2021100013
    [4]ZHANG Xiao-qing, HOU Li-qiang, SHI Dan, LU Wen-jing, XU Pei-min. Difference and relationship on filtration properties of metal fiber felt in gas and liquid[J]. Powder Metallurgy Technology, 2017, 35(5): 392-397. DOI: 10.19591/j.cnki.cn11-1974/tf.2017.05.012
    [5]Wang Jianyong, Tang Huiping, Zhu Jilei, Qiao Jichao, Zang Chunyong, Ao Qingbo, Li Cheng. Effect of porosity on compressive properties of porous sintered stainless steel fiber media[J]. Powder Metallurgy Technology, 2009, 27(5): 323-326.
    [6]Ding Guangyu, Feng Huixia, Ren Wei, Liu Xuequan, Li Hongyin. Effect of the Ni coated graphite powders addition on the properties of the Fe-based solid self-lubricating composites[J]. Powder Metallurgy Technology, 2009, 27(1): 11-14,19.
    [7]P/M Metal-matrix High-temperature Solid Self-lubricating Materials[J]. Powder Metallurgy Technology, 2001, 19(2): 86-92. DOI: 10.3321/j.issn:1001-3784.2001.02.007
    [8]Liu Rutie, Li Xibin. Effects of MoS2 Addiction on the Tribological Characteristics of Self-lubricating Nickel-base Material[J]. Powder Metallurgy Technology, 2000, 18(1): 31-34.
    [9]Peng Youfang. Inlaid Type Solid Self-Lubricating Bearing Used for Metallurgical Machinery Equipment[J]. Powder Metallurgy Technology, 1997, 15(2): 139-145.
    [10]Huang Hanzhong, Li Mulin. Application of Solid lubricating Materials for Pantograph slide Plate[J]. Powder Metallurgy Technology, 1997, 15(1): 43-45.

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (195) PDF downloads (5) Cited by()
    Related

    Website Copyright Editorial Office of Powder Metallurgy Technology京ICP备13030111号

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return