INFLUENCE OF DIE STRUCTURE AND COINING MODE ON COAXALITY OF BEARINGS

Abstract

The present paper has described the influence of die structure and integral mode on the coaxality of bearings and has pointed out that full coining is an effective method for improving the coaxality of bearings. Author has also given out the technical paramelers and calculating formulas for the design of full coining die as well as the principles for the determination of high accurate to lerance.

FullText(HTML)

[1]	BAO Xi-fang, XIE Yong-xu. Study on improving the straightness of tantalum wire[J]. Powder Metallurgy Technology, 2020, 38(5): 340-343, 349. DOI: 10.19591/j.cnki.cn11-1974/tf.2019070002
[2]	Aluminum base oil-impregnated sintered bearing[J]. Powder Metallurgy Technology, 2004, 22(2): 76-79. DOI: 10.3321/j.issn:1001-3784.2004.02.003
[3]	Porous Sintered Bearings[J]. Powder Metallurgy Technology, 2002, 20(3): 121-128. DOI: 10.3321/j.issn:1001-3784.2002.03.001
[4]	Lu Weimin, Yang Xuanzeng. Forming Method of Non-Coaxial Compact[J]. Powder Metallurgy Technology, 1997, 15(2): 113-116.
[6]	Liu Honglin. DEVELOPMENT OF SINTERED BRONZED-IRON BASE BEARING MATERIALS[J]. Powder Metallurgy Technology, 1992, 10(3): 198-203.
[7]	Xu Qidong, Zheng Yidi, Su Tianzhu. EMPIRICAL FORMULAS OF TOOL DESIGN FOR COPPER BASE OIL-IMPREGNATED BEARING[J]. Powder Metallurgy Technology, 1992, 10(2): 111-114.
[8]	Yi Jiaming. A STUDY ON ROLLING BEARINGS MANUFACTURED BY ATOMIZED BEARING STEEL POWDER[J]. Powder Metallurgy Technology, 1990, 8(1): 33-38.
[9]	Wang Honghao, Sun Jianshe. A METHOD FOR IMPROVING COAXALITY OF SELF-LUBRICATING BEARINGS BY SIZING THEIR WALL THICKNESS[J]. Powder Metallurgy Technology, 1985, 3(3): 16-18.
[10]	Xu Bingsui. Influence of the Fitting Clearance of Dies on the Coaxality of Liners[J]. Powder Metallurgy Technology, 1984, 2(1): 25-27.

Cited by

1.	尹怡，秦思贵，史英丽，于宏新，徐世伟. 面向等离子体钨基材料热负荷损伤研究进展. 粉末冶金技术. 2024(03): 242-254 . 本站查看
2.	王娜，武洲，朱琦，席莎，张晓，周莎，李晶，王宇晴. 放电等离子烧结制备钼镍合金. 粉末冶金技术. 2024(04): 361-366 . 本站查看
3.	罗来马，颜硕，刘祯，昝祥，吴玉程. 面向等离子体材料用先进钨复合材料的改性研究进展与趋势. 粉末冶金技术. 2023(01): 12-29 . 本站查看
4.	张小艳，罗铁钢，刘胜林，郑雪萍，王峰，马学琴，党岳辉. 稀土Yb、Ce对钛铝合金高温抗氧化性能的影响. 粉末冶金技术. 2023(03): 218-224 . 本站查看
5.	吴小俊. 发动机用石墨烯增强TC11合金放电等离子烧结制备参数优化及力学性能研究. 粉末冶金技术. 2022(04): 291-295 . 本站查看
6.	杨亚飞，姚草根，吕宏军，李启军，崔子振. 磁控溅射用W-Ti合金靶材的研究进展. 宇航材料工艺. 2021(06): 10-16 .

Get Citation

PDF

XML

Article views (268) PDF downloads (10) Cited by(8)