AdvancedSearch
Shen Shiming. PROCESSING FACTORS INFLUENCING PROPERTIES OF AUSTENITE SINTERED STAINLESS STEEL[J]. Powder Metallurgy Technology, 1988, 6(4): 213-218.
Citation: Shen Shiming. PROCESSING FACTORS INFLUENCING PROPERTIES OF AUSTENITE SINTERED STAINLESS STEEL[J]. Powder Metallurgy Technology, 1988, 6(4): 213-218.

PROCESSING FACTORS INFLUENCING PROPERTIES OF AUSTENITE SINTERED STAINLESS STEEL

More Information
  • Available Online: August 23, 2021
  • The present paper has described the influence of powder quality, compacting pressure, sintering process, etc. on the shrinkage, density, ultimate tensile strength, elongation, corrosion resistence of sintered austenite stainless steel.The chemical compositions which can meet the requirements of the properties of structural parts were determined. The raw materials used in this research were stainless steel powders produced by water atomizing process. It is shown in experiments that the austenite experiments that the austenite stainless sted powder used in experiments compacted uncer a pressure of 588-700MPa,pre-sintered at 500-600℃ for 0.5 hour and followed by sintering at 1300-1330℃ for 1-1.5 hour in hydrogen atmosphere and then cooling in a cooling water jacket. The products produced by this process have homogeneous and stable austenite structure with fine grain, so that a superior combination of physico-mechanical properties with wear resistance can be obtained.
  • Related Articles

    [1]ZHANG Xinyun, GENG Nan, ZHAO Yingxiang, DU Shan, CAO Yan, MENG Junhu, GUO Junde. Tribological behaviour of Cu‒Zn based self-lubricating materials reinforced with rare earth oxide Y2O3[J]. Powder Metallurgy Technology. DOI: 10.19591/j.cnki.cn11-1974/tf.2024010005
    [2]ZHENG Haifei, YIN Yanguo, LI Rongrong. Tribological properties of iron-based bearing materials prepared through FeS surface modification[J]. Powder Metallurgy Technology, 2024, 42(5): 516-524. DOI: 10.19591/j.cnki.cn11-1974/tf.2024050007
    [3]DING Xiaolong, YANG Zhaofang, ZHENG Hejing. Effect of ZrP on properties of CuBi-steel-backed double-layer metal composites[J]. Powder Metallurgy Technology, 2024, 42(2): 128-134. DOI: 10.19591/j.cnki.cn11-1974/tf.2021100013
    [4]ZHANG Xiao-qing, HOU Li-qiang, SHI Dan, LU Wen-jing, XU Pei-min. Difference and relationship on filtration properties of metal fiber felt in gas and liquid[J]. Powder Metallurgy Technology, 2017, 35(5): 392-397. DOI: 10.19591/j.cnki.cn11-1974/tf.2017.05.012
    [5]Wang Jianyong, Tang Huiping, Zhu Jilei, Qiao Jichao, Zang Chunyong, Ao Qingbo, Li Cheng. Effect of porosity on compressive properties of porous sintered stainless steel fiber media[J]. Powder Metallurgy Technology, 2009, 27(5): 323-326.
    [6]Ding Guangyu, Feng Huixia, Ren Wei, Liu Xuequan, Li Hongyin. Effect of the Ni coated graphite powders addition on the properties of the Fe-based solid self-lubricating composites[J]. Powder Metallurgy Technology, 2009, 27(1): 11-14,19.
    [7]P/M Metal-matrix High-temperature Solid Self-lubricating Materials[J]. Powder Metallurgy Technology, 2001, 19(2): 86-92. DOI: 10.3321/j.issn:1001-3784.2001.02.007
    [8]Liu Rutie, Li Xibin. Effects of MoS2 Addiction on the Tribological Characteristics of Self-lubricating Nickel-base Material[J]. Powder Metallurgy Technology, 2000, 18(1): 31-34.
    [9]Peng Youfang. Inlaid Type Solid Self-Lubricating Bearing Used for Metallurgical Machinery Equipment[J]. Powder Metallurgy Technology, 1997, 15(2): 139-145.
    [10]Huang Hanzhong, Li Mulin. Application of Solid lubricating Materials for Pantograph slide Plate[J]. Powder Metallurgy Technology, 1997, 15(1): 43-45.

Catalog

    Article Metrics

    Article views PDF downloads Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return