THE CUTTING OF 610 CARBIDE SPRAYED MATERIALS

Liu Yongfu. THE CUTTING OF 610 CARBIDE SPRAYED MATERIALS[J]. Powder Metallurgy Technology, 1984, 2(2): 34-36.

Citation:

Liu Yongfu. THE CUTTING OF 610 CARBIDE SPRAYED MATERIALS[J]. Powder Metallurgy Technology, 1984, 2(2): 34-36.

Citation:

Liu Yongfu. THE CUTTING OF 610 CARBIDE SPRAYED MATERIALS[J]. Powder Metallurgy Technology, 1984, 2(2): 34-36.

Abstract

The technical problems in cutting various sprayed materials such as iron base, cobalt base, nikel base and superhard selfmelting alloy powder materials have been successfully solved by using 610 cemented carbide under following cutting conditions:edge angle 8-15°, relief angle 12-14°, cutting speed 10-35m/min and feed 0.4mm/r. This method has obtained remarkable technical and economical results.

FullText(HTML)

Export File