AdvancedSearch
Chen Demin, Wang Genshi, Song Deying, Niu Guangliang. Analysis of the Product of Ball Milling Ti-Ni and Study on Properties of Hydrogen Storage[J]. Powder Metallurgy Technology, 1997, 15(2): 94-98.
Citation: Chen Demin, Wang Genshi, Song Deying, Niu Guangliang. Analysis of the Product of Ball Milling Ti-Ni and Study on Properties of Hydrogen Storage[J]. Powder Metallurgy Technology, 1997, 15(2): 94-98.

Analysis of the Product of Ball Milling Ti-Ni and Study on Properties of Hydrogen Storage

More Information
  • Received Date: March 01, 1997
  • Available Online: July 20, 2021
  • The product of ball milling Ti and Ni powders of two kinds of ratio(Ti:Ni=50:50,Ti:Ni=65:35) has been investigated by XRD and XPS analyses. It is found that most part of the ball milling product is amorphous alloy. The slightly crystallization is attributed to the high ambient temperature and long milling time. The oxidation of the product's surface is thought to be caused by cleaning the stirring rod and the container during the milling process. The properties of hydrogen storage of the product are studied. It is found that the product is easy to activiate. The quantity of absorbed hydrogen increases with inceasing Ti content,and there is no plateau over 1 atm in P-C-T curves.
  • Related Articles

    [1]TANG Cuiyong, XIE Wenbin, ZOU Zechang, SUN Zhenjun, CHEN Xueyong, SHEN Rongfeng. Effect of TiC on amorphous forming ability, microstructure, and thermal stability of Fe55Nb15Ti15Ta15 alloys[J]. Powder Metallurgy Technology, 2024, 42(1): 84-90. DOI: 10.19591/j.cnki.cn11-1974/tf.2022100012
    [2]XIA Zheyuan, LI Jiacheng, ZOU Zechang, CHEN Zhihui, CHEN Xueyong, TANG Cuiyong. Fabrication of Ti60Mn20‒xCu20+x (x=0, 10) amorphous powders by mechanical alloying[J]. Powder Metallurgy Technology. DOI: 10.19591/j.cnki.cn11-1974/tf.2024070009
    [3]WANG Silun, CUI Zizhen, LIU Quanyi, XIE Fei, LIN Yansong. Cu–Cr–Mo alloys prepared by mechanical alloying and hot isostatic pressing[J]. Powder Metallurgy Technology, 2023, 41(5): 475-480. DOI: 10.19591/j.cnki.cn11-1974/tf.2021090001
    [4]Xu Ke, Chen Hui, Ma Qin, Zhao Xue. The preparation of Al2O3/Mo5Si3 composite powder by mechanical alloying[J]. Powder Metallurgy Technology, 2011, 29(3): 173-176,182.
    [5]Meng Jie, Jia Chengchang, Wang Kaiming. Review of formation of Ni3Al intermetallics compounds by mechanical alloying[J]. Powder Metallurgy Technology, 2006, 24(4): 299-303,309. DOI: 10.3321/j.issn:1001-3784.2006.04.015
    [6]Zhang Dongfang. DEVELOPMENT OF HEAVY ALLOY ELECTRODE FOR RESISTANCE PRESSING WELDING[J]. Powder Metallurgy Technology, 1996, 14(3): 198-200.
    [7]Zhang Tongjun, Yang Junyou, Zhou Zhuohua, Zhang Jie, Cui Kun. MECHANICAL ALLOYING PROCESS DURING HIGH ENERGY BALL MILLING[J]. Powder Metallurgy Technology, 1996, 14(1): 2-7.
    [8]Wang Erde, Wang Yongqian, Liang Guoxian, Song Guangsheng, Liu Xuhua. STRUCTURAL FEATURES OF MECHANICALLY ALLOYED Al-10Fe-4Ni POWDER[J]. Powder Metallurgy Technology, 1993, 11(3): 167-170.
    [9]Liang Guoxian, Wang Erde, Wang Yongqian, Li Zhimin. EFFECTS OF BALL MILLING CONDITIONS ON PARTICLE SIZES OF MECANICALLY ALLOYED POWDER[J]. Powder Metallurgy Technology, 1993, 11(1): 28-32.
    [10]Huang Zepei, Qiu Guanghan, Huang Yuanzhen. PREPARATION OF AMORPHOUS Cu-Ti ALLOYS MECHANICAL ALLOYING[J]. Powder Metallurgy Technology, 1992, 10(2): 99-102.

Catalog

    Article Metrics

    Article views PDF downloads Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return