AdvancedSearch
Volume 4 Issue 3
Aug.  2021
Turn off MathJax
Article Contents
Abstract
Related Articles
Wang Erde, Zhang Lianhong, Huo Wencan, Pei Yuezhong, Zhang Renheng. EXPERIMENTAL INVESTIGATION OF POWDER FORGING PROCESS USED IN MAKING COMPOSITE PLANING CHIPS FROM HIGH SPEED STEEL POWDER AND CARBON-STEEL(0.45%C) CONTAINER[J]. Powder Metallurgy Technology, 1986, 4(3): 153-157.
Citation: Wang Erde, Zhang Lianhong, Huo Wencan, Pei Yuezhong, Zhang Renheng. EXPERIMENTAL INVESTIGATION OF POWDER FORGING PROCESS USED IN MAKING COMPOSITE PLANING CHIPS FROM HIGH SPEED STEEL POWDER AND CARBON-STEEL(0.45%C) CONTAINER[J]. Powder Metallurgy Technology, 1986, 4(3): 153-157.
shu

EXPERIMENTAL INVESTIGATION OF POWDER FORGING PROCESS USED IN MAKING COMPOSITE PLANING CHIPS FROM HIGH SPEED STEEL POWDER AND CARBON-STEEL(0.45%C) CONTAINER

  • 1. Harbin Institute of Technology;

  • 2. Harbin Second Tool Plant

More Information
  • Available Online: August 23, 2021
    Graphical Abstract
    • Abstract
  • The bimetallic planing chips for carpenters were made by drop-forging high speed steel powder in carbon-steel (0. 45%C) containers. On the basis of anaiyzing technological process,the bonding strength between powder high speed steel and carbonsteel (0. 45%C) and fracture mophology were emphatically investigated.
    Experiments have shown the good bonding strength between two metals, hence it is not only feasible but also economical for commercial production of bimetallic composite materials by using this process.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]TANG Cuiyong, XIE Wenbin, ZOU Zechang, SUN Zhenjun, CHEN Xueyong, SHEN Rongfeng. Effect of TiC on amorphous forming ability, microstructure, and thermal stability of Fe55Nb15Ti15Ta15 alloys[J]. Powder Metallurgy Technology, 2024, 42(1): 84-90. DOI: 10.19591/j.cnki.cn11-1974/tf.2022100012
    [2]XIA Zheyuan, LI Jiacheng, ZOU Zechang, CHEN Zhihui, CHEN Xueyong, TANG Cuiyong. Fabrication of Ti60Mn20‒xCu20+x (x=0, 10) amorphous powders by mechanical alloying[J]. Powder Metallurgy Technology. DOI: 10.19591/j.cnki.cn11-1974/tf.2024070009
    [3]WANG Silun, CUI Zizhen, LIU Quanyi, XIE Fei, LIN Yansong. Cu–Cr–Mo alloys prepared by mechanical alloying and hot isostatic pressing[J]. Powder Metallurgy Technology, 2023, 41(5): 475-480. DOI: 10.19591/j.cnki.cn11-1974/tf.2021090001
    [4]Xu Ke, Chen Hui, Ma Qin, Zhao Xue. The preparation of Al2O3/Mo5Si3 composite powder by mechanical alloying[J]. Powder Metallurgy Technology, 2011, 29(3): 173-176,182.
    [5]Meng Jie, Jia Chengchang, Wang Kaiming. Review of formation of Ni3Al intermetallics compounds by mechanical alloying[J]. Powder Metallurgy Technology, 2006, 24(4): 299-303,309. DOI: 10.3321/j.issn:1001-3784.2006.04.015
    [6]Zhang Dongfang. DEVELOPMENT OF HEAVY ALLOY ELECTRODE FOR RESISTANCE PRESSING WELDING[J]. Powder Metallurgy Technology, 1996, 14(3): 198-200.
    [7]Zhang Tongjun, Yang Junyou, Zhou Zhuohua, Zhang Jie, Cui Kun. MECHANICAL ALLOYING PROCESS DURING HIGH ENERGY BALL MILLING[J]. Powder Metallurgy Technology, 1996, 14(1): 2-7.
    [8]Wang Erde, Wang Yongqian, Liang Guoxian, Song Guangsheng, Liu Xuhua. STRUCTURAL FEATURES OF MECHANICALLY ALLOYED Al-10Fe-4Ni POWDER[J]. Powder Metallurgy Technology, 1993, 11(3): 167-170.
    [9]Liang Guoxian, Wang Erde, Wang Yongqian, Li Zhimin. EFFECTS OF BALL MILLING CONDITIONS ON PARTICLE SIZES OF MECANICALLY ALLOYED POWDER[J]. Powder Metallurgy Technology, 1993, 11(1): 28-32.
    [10]Huang Zepei, Qiu Guanghan, Huang Yuanzhen. PREPARATION OF AMORPHOUS Cu-Ti ALLOYS MECHANICAL ALLOYING[J]. Powder Metallurgy Technology, 1992, 10(2): 99-102.

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views PDF downloads Cited by()
    Related

    Website Copyright Editorial Office of Powder Metallurgy Technology京ICP备13030111号

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return