AdvancedSearch
Volume 7 Issue 1
Aug.  2021
Turn off MathJax
Article Contents
Abstract
Related Articles
Tang Ronggan. DESIGN AND MANUFACTURE OF DIE SET WITH FLANGED GEAR[J]. Powder Metallurgy Technology, 1989, 7(1): 23-26.
Citation: Tang Ronggan. DESIGN AND MANUFACTURE OF DIE SET WITH FLANGED GEAR[J]. Powder Metallurgy Technology, 1989, 7(1): 23-26.
shu

DESIGN AND MANUFACTURE OF DIE SET WITH FLANGED GEAR

  • Nanning Powder Metallurgy Plant

More Information
  • Available Online: August 22, 2021
    Graphical Abstract
    • Abstract
  • The compacting method, the die set structure and the design and manufacturing process of cavity die for P/M gear with three-hole flange have been introduced. By using cavity die for P/M gear with three-hole flange made by the process combining wire cutting and electric spark, high precision gear can be produced.The required size and pitch of three holes can easily be quaranteed. In case that module is below I and the thickness of cavity die is up to 25mm, both finish and rough parts of electrode can be eiectrically machined from one piece of raw material, thus the precision of cavity die can be easily guaranteed.
    • FullText(HTML)
    • References (0)
    • Related Articles

  • Related Articles

    [1]The effect of sintering temperature on the properties of PCD with Ti-Al binder[J]. Powder Metallurgy Technology. DOI: 10.19591/j.cnki.cn11-1974/tf.2024070006
    [2]XIAO Chang-jiang, DUO Zhi-qiang, LI Zheng-xin. Effect of Ti on the holding force of Al-based bonded diamond bits[J]. Powder Metallurgy Technology, 2018, 36(1): 21-25. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.01.004
    [3]Liang Baoyan, Wang Yanzhi, Zhang Wangxi, Wang Junhe, Yan Shuaishuai, Mu Yunchao. Effect of diamond size and content on the phase composition and morphology of Ti2AlC bonded diamond obtained by self-propagation high temperature sintering[J]. Powder Metallurgy Technology, 2016, 34(1): 35-42. DOI: 10.3969/j.issn.1001-3784.2016.01.007
    [4]Li Ming, Jia Chengchang, Guo Hong, Xu Chao, Chu Yuxian. Study on the vacuum brazing of diamond/Cu composite material and diamond film with Ag-Cu-Ti active filler metal[J]. Powder Metallurgy Technology, 2013, 31(6): 444-450. DOI: 10.3969/j.issn.1001-3784.2013.06.009
    [5]Wu Yikun, Yu Qing. Influence of MoS2 and C on the Properites of P/M Diamond Composite Material[J]. Powder Metallurgy Technology, 1997, 15(3): 208-212.
    [6]Wang Lan, Gao Xuexu. Quantitative Phase Analyses on Diffusion Reaction Between Diamond Monocrystal and Ti Plating Film on its Surface[J]. Powder Metallurgy Technology, 1997, 15(2): 146-148.
    [7]Xiong Ji, Yang Jiangao, Liu Weixiang, Xia Xi. INVESTIGATION ON ADDITION OF RARE-EARTH ELEMENT IN YGR8 CEMENTED CARBIDE DRAWING DIE[J]. Powder Metallurgy Technology, 1994, 12(2): 118-121.
    [8]Qin Xijie, Yin Sheng, Lai Heyi. BEHAVIOR OF CARBIDE-FORMING ELEMENTS IN MATRIX MATERIALS OF DIAMOND TOOLS[J]. Powder Metallurgy Technology, 1992, 10(2): 87-91.
    [9]Wen Tao, Yin Sheng, Lai Heyi. INVESTIGATION OF SINTERING PROCESS OF SILICON-TITANIUM-BORON DOPED DIAMOND[J]. Powder Metallurgy Technology, 1992, 10(1): 13-18.
    [10]Peng Xilin, Lü Haibo. AN INVESTIGATION ON THE METAL-COATING TREATMENT OF DIAMOND SURFACE[J]. Powder Metallurgy Technology, 1992, 10(1): 3-7.

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views PDF downloads Cited by()
    Related

    Website Copyright Editorial Office of Powder Metallurgy Technology京ICP备13030111号

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return