AdvancedSearch
Zheng Shulin. INFLUENCE OF O/Cfree RATIO IN COMPACT BEFORE SINTERING ON PROPERTIES OF VACUUM SINTERED YT HARD METAL[J]. Powder Metallurgy Technology, 1989, 7(1): 14-17.
Citation: Zheng Shulin. INFLUENCE OF O/Cfree RATIO IN COMPACT BEFORE SINTERING ON PROPERTIES OF VACUUM SINTERED YT HARD METAL[J]. Powder Metallurgy Technology, 1989, 7(1): 14-17.

INFLUENCE OF O/Cfree RATIO IN COMPACT BEFORE SINTERING ON PROPERTIES OF VACUUM SINTERED YT HARD METAL

More Information
  • Available Online: August 22, 2021
  • The influence of the ratio between oxygen contents and free carbon contents(O/Cfree ratio for short)in YT hard metal compacts before vacuum sintering and also the influence of compound carbon content in products by vacuum sintering compacts with different O/Cfee ratio at 1250 C for 90 min on the bending strength, hardness and cutting coefficient of YT hard metal are studied in present paper.The results have demonstrated that the carbon contents and strength decrease and the hardness and cutting coefficients increase with the increase of O/Cfee ratio in compact before sintering. The above results reflect on a decarbonization reaction which has happened during sintering.The optimal O/Cfree ratio is 1.1~1.5.The method for controlling O/Cfree ratio and for calculating composition are also explained.
  • Related Articles

    [1]The effect of sintering temperature on the properties of PCD with Ti-Al binder[J]. Powder Metallurgy Technology. DOI: 10.19591/j.cnki.cn11-1974/tf.2024070006
    [2]XIAO Chang-jiang, DUO Zhi-qiang, LI Zheng-xin. Effect of Ti on the holding force of Al-based bonded diamond bits[J]. Powder Metallurgy Technology, 2018, 36(1): 21-25. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.01.004
    [3]Liang Baoyan, Wang Yanzhi, Zhang Wangxi, Wang Junhe, Yan Shuaishuai, Mu Yunchao. Effect of diamond size and content on the phase composition and morphology of Ti2AlC bonded diamond obtained by self-propagation high temperature sintering[J]. Powder Metallurgy Technology, 2016, 34(1): 35-42. DOI: 10.3969/j.issn.1001-3784.2016.01.007
    [4]Li Ming, Jia Chengchang, Guo Hong, Xu Chao, Chu Yuxian. Study on the vacuum brazing of diamond/Cu composite material and diamond film with Ag-Cu-Ti active filler metal[J]. Powder Metallurgy Technology, 2013, 31(6): 444-450. DOI: 10.3969/j.issn.1001-3784.2013.06.009
    [5]Wu Yikun, Yu Qing. Influence of MoS2 and C on the Properites of P/M Diamond Composite Material[J]. Powder Metallurgy Technology, 1997, 15(3): 208-212.
    [6]Wang Lan, Gao Xuexu. Quantitative Phase Analyses on Diffusion Reaction Between Diamond Monocrystal and Ti Plating Film on its Surface[J]. Powder Metallurgy Technology, 1997, 15(2): 146-148.
    [7]Xiong Ji, Yang Jiangao, Liu Weixiang, Xia Xi. INVESTIGATION ON ADDITION OF RARE-EARTH ELEMENT IN YGR8 CEMENTED CARBIDE DRAWING DIE[J]. Powder Metallurgy Technology, 1994, 12(2): 118-121.
    [8]Qin Xijie, Yin Sheng, Lai Heyi. BEHAVIOR OF CARBIDE-FORMING ELEMENTS IN MATRIX MATERIALS OF DIAMOND TOOLS[J]. Powder Metallurgy Technology, 1992, 10(2): 87-91.
    [9]Wen Tao, Yin Sheng, Lai Heyi. INVESTIGATION OF SINTERING PROCESS OF SILICON-TITANIUM-BORON DOPED DIAMOND[J]. Powder Metallurgy Technology, 1992, 10(1): 13-18.
    [10]Peng Xilin, Lü Haibo. AN INVESTIGATION ON THE METAL-COATING TREATMENT OF DIAMOND SURFACE[J]. Powder Metallurgy Technology, 1992, 10(1): 3-7.

Catalog

    Article Metrics

    Article views PDF downloads Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return