AdvancedSearch
Huang Luguan. FRACTURE TOUGHNESS AND HIGH DUCTILITY OF STEEL-BONDED CARBIDE[J]. Powder Metallurgy Technology, 1986, 4(1): 10-15.
Citation: Huang Luguan. FRACTURE TOUGHNESS AND HIGH DUCTILITY OF STEEL-BONDED CARBIDE[J]. Powder Metallurgy Technology, 1986, 4(1): 10-15.

FRACTURE TOUGHNESS AND HIGH DUCTILITY OF STEEL-BONDED CARBIDE

More Information
  • Available Online: August 23, 2021
  • In this paper, the fracture toughness (KIc) of steel-bonded carbide has been determined by a method of three points crook while the state of fracture section has been observed with SEM. Author considers that it is more suitable to substitute once-impact toughness by fracture toughness (KIc) for evaluating the toughness of steel-bonded carbide.
    When the die of steel-bonded carbide is used in cold working, brittle fracture is the main form of losing its efficiency. The paper has discussed the wear tests under the condition similar to cold working. The following result has been discovered that the wear resistance of alloy is a function of hardness and fracture toughness. Using an optimal heat treatment process will enable to improve on the performance duration of die.
  • Related Articles

    [1]MU Jianghan, LIU Shumei, LI Dajie, YANG Hangzhou, ZHOU Haitao. Deformation of Fe2Ni prepared by metal powder injection molding[J]. Powder Metallurgy Technology. DOI: 10.19591/j.cnki.cn11-1974/tf.2023070001;https://pmt.ustb.edu.cn
    [2]HOU Cheng-long, GUO Jun-qing, CHEN Fu-xiao, HUANG Tao. Metal powder injection molding technology and numerical simulation[J]. Powder Metallurgy Technology, 2022, 40(1): 72-79. DOI: 10.19591/j.cnki.cn11-1974/tf.2020120007
    [3]SUN Si-heng, SUN Yan, JIA Cun-feng, WANG Hui-jie, FANG Yun-feng, PANG Lei. Study on the explosion sensitivity of metal powders used in additive manufacturing[J]. Powder Metallurgy Technology, 2020, 38(4): 249-256. DOI: 10.19591/j.cnki.cn11-1974/tf.2020010009
    [4]ZHUANG Tian-ya, ZHANG Ji-liang, WANG Fei, ZHANG Sai-sai, HUANG Yi-bin. Research progress on the microwave sintering mechanism of metal powders[J]. Powder Metallurgy Technology, 2019, 37(5): 392-398. DOI: 10.19591/j.cnki.cn11-1974/tf.2019.05.011
    [5]LIN Li, LIU Jun, ZHOU Chun, HU Hai-feng. Optimization analysis of die mass and particle model in metal powder impact compaction[J]. Powder Metallurgy Technology, 2018, 36(3): 182-189. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.03.004
    [6]Xiang Qingchun, Zhou Bide, Li Rongde. DEVELOPMENTS OF RAPID SOLIDIFICATION TECHNIQUES FOR METAL POWDER PRODUCTION[J]. Powder Metallurgy Technology, 2000, 18(4): 283-291.
    [7]Li Mingyi, Guo Shiju, Kang Zhijun, Lin Tao. WARM COMPACTION BEHAVIOR OF VARIOUS METAL POWDERS[J]. Powder Metallurgy Technology, 2000, 18(4): 261-264.
    [8]Qu Xuanhui, Yan Hansong, Huang Baiyun. Development of Binders for Metal Powder Injection Molding[J]. Powder Metallurgy Technology, 1997, 15(1): 61-65.
    [9]Li Qingquan, Ouyang Tong, Ma Runhai, Tong Lirong, Han Yanliang, Lin Gang. Research of Producing procedure of Fine Metal Powder by gas Atomization[J]. Powder Metallurgy Technology, 1996, 14(3): 181-188.
    [10]Dong Jianzhong. STUDY OF BAKING METAL POWDER METHODS[J]. Powder Metallurgy Technology, 1990, 8(4): 213-215.

Catalog

    Article Metrics

    Article views (254) PDF downloads (10) Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return