Citation: | Liu Tao, Fan Jinglian, Tian Jiamin, Cheng Huichao. Phase transformation during calcining and reducing of spray-dried W-Cu precursor powder[J]. Powder Metallurgy Technology, 2010, 28(2): 83-86,91. |
[1] | YANG Guang, LI Gemin, WEI Bangzheng, XU Dang, CHEN Pengqi, CHENG Jigui. Preparation and sintering behavior of ultrafine Cu–20W composite powders by sol–gel with hydrogen reduction technology[J]. Powder Metallurgy Technology, 2025, 43(1): 12-19. DOI: 10.19591/j.cnki.cn11-1974/tf.2023050001 |
[2] | Zhou hua, Zhou Xinwen, Li Guoxin, Sun Yuanjun. Technological parameters study of MoO2 powder prepared by hydrogen reduction[J]. Powder Metallurgy Technology, 2015, 33(1): 3-7,12. |
[3] | Chen Wenchao, Cheng Jigui, Ye Nanmin, Liu Yan. Preparation of nanosized silver powders by a liquid-phase reduction method[J]. Powder Metallurgy Technology, 2014, 32(1): 3-6. DOI: 10.3969/j.issn.1001-3784.2014.01.001 |
[4] | Tian Ying, Li Yungang, Jiao Yang. Current situation of ultrafine W-Cu composite powders preparation[J]. Powder Metallurgy Technology, 2011, 29(4): 296-299. |
[5] | Peng Shigao, Fan Jinglian, Liu Tao, Qi Meigui, Ding Fei, Tian Jiamin. Effects of rare earth content and reduction temperature on preparation of superfine (W,Ni,Fe) composite powder[J]. Powder Metallurgy Technology, 2009, 27(1): 36-39,66. |
[6] | Xiao Jin, Chen Yanbin, Zhou Feng, Peng Zhongdong, Li Jie, Liu Yexiang. Effects of calcining methods and addictives on AIN powder prepared by carbothermal reduction[J]. Powder Metallurgy Technology, 2008, 26(5): 332-335. |
[7] | Wang Yumian, Yu Mengjiao. Effects of surfactants on hydrazine synthesis of nanocrystalline copper powders under ultrasonic condition[J]. Powder Metallurgy Technology, 2008, 26(4): 296-298,303. |
[8] | Ma Yunzhu, Huang Baiyun, Liu Wensheng, Xiong Xiang, Wang Denglong. Study on phase transformation of (W,Ni,Fe) composite oxide powder in H2-reduction process[J]. Powder Metallurgy Technology, 2005, 23(4): 259-262. DOI: 10.3321/j.issn:1001-3784.2005.04.004 |
[9] | Pressure sintering of mechanically activated W-Cu powder[J]. Powder Metallurgy Technology, 2004, 22(1): 33-36. DOI: 10.3321/j.issn:1001-3784.2004.01.009 |
[10] | Preparing W-Cu Alloys by Mechanical and Chemical Activation Processes[J]. Powder Metallurgy Technology, 2001, 19(3): 148-152. DOI: 10.3321/j.issn:1001-3784.2001.03.005 |