粉末冶金Ti-14Al-21Nb合金的HIP成形
FORMING OF POWDER METALLURGY Ti-14Al-21Nb ALLOY BY HIP
-
摘要: 本文讨论了Ti-14Al-21Nb合金粉末热等静压(HIP)成形方法和工艺参数对合金室温拉伸性能的影响。用钛作包套并以电子束封焊是用于Ti3Al基合金粉末HIP成形的有效方法。HIP成形的合金均可得到α2+β结构,但是初生α2相的含量随HIP温度的提高而减少,合金经1100℃HIP可以获得较好的强度和延伸率。
-
关键词:
- 热等静压制
Abstract: This paper has discussed a method for forming Ti-14Al-21Nb alloyed powder by hot isostatic pressing (HIP) and the influence of its parameters on tensile strength. It is an effective method of HIP forming by using titanium capsule and using Ti3Al base alloyed powder for electron-beam wel ding. Alloy with α2+β structure can be obtained by HIP, but the contents of primary α2 phase decrease with increasing temperature of HIP. Superior strength and elongation can be obtained by HIP at 1100℃.-
Key words:
- hot isostatic pressing
-
点击查看大图
计量
- 文章访问数: 230
- HTML全文浏览量: 45
- PDF下载量: 5
- 被引次数: 0
下载:
