[1] |
Koc R, Kodambaka S K. Tungsten carbide(WC)synthesis from novel precursors. J Eur Ceram Soc, 2000, 20(11): 1859. doi: 10.1016/S0955-2219(00)00038-8
|
[2] |
Medeiros F F P, Oliveira S A D, Souza C P D, et al. Synthesis of tungsten carbide through gas–solid reaction at low temperatures. Mater Sci Eng A, 2001, 315(1–2): 58. doi: 10.1016/S0921-5093(01)01214-X
|
[3] |
Byrne G, Dornfeld D, Denkena B. Advancing cutting technology. CIRP Ann, 2003, 52(2): 483. doi: 10.1016/S0007-8506(07)60200-5
|
[4] |
Liao Y S, Lin H M, Wang J H. Behaviors of end milling Inconel 718 superalloy by cemented carbide tools. J Mater Process Technol, 2008, 201(1): 460. http://www.sciencedirect.com/science/article/pii/S0924013607012009
|
[5] |
Jia M X, Wang M Y, Li Y F, et al. Characteristics of Chinese tungsten ore and the problems in the tungsten resource utilization. Min Metall, 2013, 22(1): 90 doi: 10.3969/j.issn.1005-7854.2013.01.023贾木欣, 王明燕, 李艳峰, 等.我国钨资源矿石性质特点及资源利用存在的问题.矿冶, 2013, 22(1): 90 doi: 10.3969/j.issn.1005-7854.2013.01.023
|
[6] |
Liu B, Wang Y H, Wang C, et al. Situation and suggestions of China's cobalt resources industry. Resour Ind, 2014, 16(3): 113 https://www.cnki.com.cn/Article/CJFDTOTAL-ZIYU201403026.htm刘彬, 王银宏, 王臣, 等.中国钴资源产业形势与对策建议.资源与产业, 2014, 16(3): 113 https://www.cnki.com.cn/Article/CJFDTOTAL-ZIYU201403026.htm
|
[7] |
Zuo T Y, Song X Y. Discussions concerning development of high-grade tungsten products in China. Cemented Carbide, 2012, 29(6): 337 doi: 10.3969/j.issn.1003-7292.2012.06.001左铁镛, 宋晓艳.我国高端钨制品发展有关问题的思考与探讨.硬质合金, 2012, 29(6): 337 doi: 10.3969/j.issn.1003-7292.2012.06.001
|
[8] |
Zhai X. The current aituation of technical processing of hard alloys recycling and utilization. Non-ferrous Met Recycl Utiliz, 2004(1): 14 https://www.cnki.com.cn/Article/CJFDTOTAL-JSZS200401008.htm翟昕.硬质合金回收利用工艺现状.有色金属再生与利用, 2004(1): 14 https://www.cnki.com.cn/Article/CJFDTOTAL-JSZS200401008.htm
|
[9] |
Tang Q Y, Wu Y L, Duan D P. Metal tungsten and cobalt recycled from disused anvil by niter casting. J Xiangnan Univ, 2004, 25(2): 51 https://www.cnki.com.cn/Article/CJFDTOTAL-CZSZ200402014.htm汤青云, 吴永兰, 段冬平.硝石熔炼法从废顶锤中回收金属钨和钴.湘南学院学报, 2004, 25(2): 51 https://www.cnki.com.cn/Article/CJFDTOTAL-CZSZ200402014.htm
|
[10] |
Zhang Y Z, Cai C S. Comprehensive recovery of high temperature carbide scrap containing cobalt. Min Metall Eng, 2000, 20(2): 34 doi: 10.3969/j.issn.0253-6099.2000.02.012张愈祖, 蔡传算.含钴硬质合金废料的综合回收.矿冶工程, 2000, 20(2): 34 doi: 10.3969/j.issn.0253-6099.2000.02.012
|
[11] |
Jiang W W, Gao J, Pu C E, et al. Co recovery from Co slag arising from scrap hard metal smelting with Na2SO4. Rare Met Cemented Carbides, 2000(2): 22 doi: 10.3969/j.issn.1004-0536.2000.02.006姜文伟, 高晋, 普崇恩, 等.硫酸钠熔炼法处理废硬质合金工艺中钴的回收.稀有金属与硬质合金, 2000(2): 22 doi: 10.3969/j.issn.1004-0536.2000.02.006
|
[12] |
Xu Y C, Jiang P. Recovery technology of hard alloy. China Nonferrous Met, 2008(14): 74 https://www.cnki.com.cn/Article/CJFDTOTAL-YSGY200814029.htm徐迎春, 姜萍.硬质合金的回收技术.中国有色金属, 2008(14): 74 https://www.cnki.com.cn/Article/CJFDTOTAL-YSGY200814029.htm
|
[13] |
Zhai X, Zhou C S, Miao X J. Study of H3PO4 dynamic leaching for treatment of low-cobalt cemented carbide scraps. Rare Met Cemented Carbides, 1996(2): 126 https://www.cnki.com.cn/Article/CJFDTOTAL-XYJY602.000.htm翟昕, 周长松, 苗兴军.磷酸动态浸出法处理低钴类废硬质合金的研究.稀有金属与硬质合金, 1996(2): 126 https://www.cnki.com.cn/Article/CJFDTOTAL-XYJY602.000.htm
|
[14] |
Lu Y M. Foreign Cemented Carbide. Beijing: Metallurgical Industry Press, 1975陆远明.国外硬质合金.北京: 冶金工业出版社, 1975
|
[15] |
Yang B, Chen G J, Shi A H, et al. Review on technologies of short recycle process for scrap cemented carbide. Mater Rev, 2015, 29(3): 68 https://www.cnki.com.cn/Article/CJFDTOTAL-CLDB201503014.htm杨斌, 陈广军, 石安红, 等.废旧硬质合金短流程回收技术的研究现状.材料导报, 2015, 29(3): 68 https://www.cnki.com.cn/Article/CJFDTOTAL-CLDB201503014.htm
|
[16] |
Zhao W J. Study on Performance Improvement and Process Optimization of Recycling Cemented Carbide[Dissertation]. Changsha: Central South University, 2009赵万军.再生硬质合金性能提高及工艺优化研究, 长沙: 中南大学, 2009
|
[17] |
Duan D P. Dealing with hard alloy scrap by electrolysis and retrieving cobalt metal and tungsten carbide from it. J Yiyang Teach Coll, 1998, 15(5): 43 https://www.cnki.com.cn/Article/CJFDTOTAL-YZHJ200003005.htm段冬平.电溶法处理废硬质合金回收金属钴和碳化钨.湖南城市学院学报, 1998, 15(5): 43 https://www.cnki.com.cn/Article/CJFDTOTAL-YZHJ200003005.htm
|
[18] |
Tang Q Y, Duan D P. The treatment of hard alloy scrap to recover cobalt melt and tungsten carbide by electroosmosis and electrolysis. Cemented Carbide, 2000, 17(3): 147 doi: 10.3969/j.issn.1003-7292.2000.03.005汤青云, 段冬平.电渗析电溶法处理废硬质合金回收金属钴和碳化钨.硬质合金, 2000, 17(3): 147 doi: 10.3969/j.issn.1003-7292.2000.03.005
|
[19] |
Zhang L, Chen S, Xiong X J, et al. Study on the quality control of tungsten carbide powder reclaimed by electrochemical method. Cemented Carbide, 2006, 23(2): 103 doi: 10.3969/j.issn.1003-7292.2006.02.010张立, 陈述, 熊湘君, 等.电化学回收WC粉末质量控制问题的探讨.硬质合金, 2006, 23(2): 103 doi: 10.3969/j.issn.1003-7292.2006.02.010
|
[20] |
Cha S I, Hong S H, Ha G H, et al. Mechanical properties of WC–10Co cemented carbides sintered from nanocrystalline spray conversion processed powders. Int J Refract Met Hard Mater, 2001, 19(4): 397. http://www.sciencedirect.com/science/article/pii/S0263436801000579
|
[21] |
Gris B. Comparison between chemical method and Zinc-process of cemented carbide scrap. Transl. by Chen L L. Sichuan Nonferrous Met, 2000(4): 53 https://www.cnki.com.cn/Article/CJFDTOTAL-ZSHK201602011.htm格里斯B.废旧硬质合金的回收―化学法和锌熔法的比较.陈立兰, 译.四川有色金属, 2000(4): 53 https://www.cnki.com.cn/Article/CJFDTOTAL-ZSHK201602011.htm
|
[22] |
Hu Y J, Sun P M, Li H G, et al. Recovery and latest development for cemented carbide scrap. Rare Met Cemented Carbides, 2004, 32(3): 53 doi: 10.3969/j.issn.1004-0536.2004.03.015胡宇杰, 孙培梅, 李洪桂, 等.废硬质合金的回收再生方法及研究进展.稀有金属与硬质合金, 2004, 32(3): 53 doi: 10.3969/j.issn.1004-0536.2004.03.015
|
[23] |
Zhang C Z, Sun Q X, Zhang H X. Investigation on zinc heat erosion process for recycling cemented carbide. Powder Metall Technol, 1989, 7(3): 129 https://www.cnki.com.cn/Article/CJFDTOTAL-FMYJ198903000.htm张承忠, 孙秋霞, 张洪绪.锌热腐蚀法回收硬质合金的研究.粉末冶金技术, 1989, 7(3): 129 https://www.cnki.com.cn/Article/CJFDTOTAL-FMYJ198903000.htm
|
[24] |
Kuang H. The latest development of waste cemented carbide recovery with zinc melting method. Rare Met Cemented Carbides, 2016, 44(5): 79 https://www.cnki.com.cn/Article/CJFDTOTAL-XYJY201605018.htm邝海.锌熔法回收废旧硬质合金的研究进展.稀有金属与硬质合金, 2016, 44(5): 79 https://www.cnki.com.cn/Article/CJFDTOTAL-XYJY201605018.htm
|
[25] |
Liu F P. Recovery of waste cemented carbide by zinc melting method. Yunnan Metall, 1987(4): 44 https://www.cnki.com.cn/Article/CJFDTOTAL-YNYJ198704010.htm刘飞鹏.锌熔法回收废硬质合金.云南冶金, 1987(4): 44 https://www.cnki.com.cn/Article/CJFDTOTAL-YNYJ198704010.htm
|
[26] |
Ruan J M, Zhao W J, Yang H L. Research on preparation technologies and properties of recycling cemented carbide//The Proceedings of 2009 Powder Metallurgy Academic Meeting. Changsha, 2009: 267阮建明, 赵万军, 杨海林.再生硬质合金制备工艺及组织与性能研究//2009全国粉末冶金学术会议论文集.长沙, 2009: 267
|
[27] |
Lin C Y. Research and development of nickel cast iron crucible for zinc melting method. Mod Cast Iron, 1984(3): 49林超元.镍铸铁锌熔法坩锅的研制与应用.现代铸铁, 1984(3): 49
|
[28] |
Zhao W J, Yang H L, Ruan J M, et al. Study on microstructure and properties of cemented carbide produced by recycled materials. Cemented Carbide, 2008, 25(3): 169 doi: 10.3969/j.issn.1003-7292.2008.03.009赵万军, 杨海林, 阮建明, 等.再生料制备的硬质合金组织与性能研究.硬质合金, 2008, 25(3): 169 doi: 10.3969/j.issn.1003-7292.2008.03.009
|
[29] |
Bondarenko V, Pavlotskaya E, Martynova L. Production of tungsten–cobalt cemented carbides. Mater Process Rep, 2002, 17(1): 30.
|
[30] |
Liu W B, Song X Y, Zhang J X, et al. Preparation of ultrafine WC–Co composite powder by in situ reduction and carbonization reactions. Int J Refract Met Hard Mater, 2009, 27(1): 115. doi: 10.1016/j.ijrmhm.2008.05.001
|
[31] |
Wang Y, Liu X M, Song X Y, et al. Short-term process of recycling cemented carbide scraps and preparation of high performance hard metals. Acta Metall Sin, 2014, 50(5): 633 https://www.cnki.com.cn/Article/CJFDTOTAL-JSXB201405016.htm王瑶, 刘雪梅, 宋晓艳, 等.高性能再生硬质合金的短流程回收制备.金属学报, 2014, 50(5): 633 https://www.cnki.com.cn/Article/CJFDTOTAL-JSXB201405016.htm
|
[32] |
Yang J G, Huang B Y, Liu Y. A new method of producing ultrafine WC–Co composite powder from scrap sintered carbide. China Tungsten Ind, 2003, 18(2): 35 doi: 10.3969/j.issn.1009-0622.2003.02.011羊建高, 黄伯云, 刘咏.一种利用废残粗晶硬质合金生产超细WC–Co复合粉末的新方法.中国钨业, 2003, 18(2): 35 doi: 10.3969/j.issn.1009-0622.2003.02.011
|
[33] |
Chen P, Li H K. Study on the technique of reclaiming cemented carbide by high-temperature treatment. Cemented Carbide, 2001, 18(4): 201 doi: 10.3969/j.issn.1003-7292.2001.04.003陈芃, 李海坤.硬质合金高温处理回收工艺研究.硬质合金, 2001, 18(4): 201 doi: 10.3969/j.issn.1003-7292.2001.04.003
|
[34] |
Xiong W L. A Recovery Method and Application of Hard Metal Scrap: China Patent, 103409634A. 2013–11–27熊文林.一种废硬质合金的回收方法及应用: 中国专利, 103409634A. 2013–11–27
|
[35] |
Zhao Q S. Latest development of the mechanical grinding as simplest method for recovering of hard metal scrap. Rare Met Cemented Carbides, 2002, 30(3): 58 doi: 10.3969/j.issn.1004-0536.2002.03.017赵秦生.硬质合金回收简便方法―机械破碎法的新进展.稀有金属与硬质合金, 2002, 30(3): 58 doi: 10.3969/j.issn.1004-0536.2002.03.017
|
[36] |
Wu Z J, Liang X H. The techniques discussion of producing cemented carbide with recycling material by the new type crashing method. Cemented Carbide, 2004, 21(4): 241 doi: 10.3969/j.issn.1003-7292.2004.04.012吴子军, 梁小华. "新型破碎法"回收料生产硬质合金的工艺探索.硬质合金, 2004, 21(4): 241 doi: 10.3969/j.issn.1003-7292.2004.04.012
|
[37] |
Su H. Recovery Processes of Scrap Cemented Carbide: China Patent, 1876287A. 2006–12–13苏华.硬质合金回收方法: 中国专利, 1876287A. 2006–12–13
|