[1] |
Li L J, Li Y M, Deng Z Y. Metal powder injection molding production equipment and its development trend. Mater Sci Eng Powder Metall, 2004(3): 212李流军, 李益民, 邓忠勇. 金属粉末注射成形生产设备及其发展趋势. 粉末冶金材料科学与工程, 2004(3): 212
|
[2] |
Aslam M, Ahmad F, Yusoff P S, et al. Investigation of boron addition on densification and cytotoxicity of powder injection molded 316L stainless steel dental materials. Arabian J Sci Eng, 2016, 41(11): 4669 doi: 10.1007/s13369-016-2224-1
|
[3] |
Abdullah A A, Norita H, Azlina H N, et al. Preparation of SS316L MIM feedstock with biopolymer as a binder. IOP Conf Ser Mater Sci Eng, 2018, 290(1): 012076
|
[4] |
He Y Q, Chen Z H, Chen Z G. The principle and development trend of metal powder injection molding. J Mater Sci Eng, 2013(2): 165贺毅强, 陈振华, 陈志钢. 金属粉末注射成形的原理与发展趋势. 材料科学与工程学报, 2013(2): 165
|
[5] |
Wang C S, Liu Y, Hu J Q. The influence of binder content on the flow properties of metal feeds. China Rubber Ind, 2017, 64(7): 431汪传生, 刘营, 胡纪全. 粘结剂含量对金属喂料流动性能的影响. 橡胶工业, 2017, 64(7): 431
|
[6] |
Hnatkova E, Hausnerova B, Hales A, et al. Processing of MIM feedstocks based on Inconel 718 powder and partially water-soluble binder varying in PEG molecular weight. Powder Technol, 2017, 322: 439 doi: 10.1016/j.powtec.2017.09.029
|
[7] |
Hayat M D, Goswami A, Matthews S, et al. Modification of PEG/PMMA binder by PVP for titanium metal injection moulding. Powder Technol, 2017, 315: 243 doi: 10.1016/j.powtec.2017.04.004
|
[8] |
Muhammad D H, Jadhav P P, Zhang H, et al. Improving titanium injection moulding feedstock based on PEG/PPC based binder system. Powder Technol, 2018, 330: 304 doi: 10.1016/j.powtec.2018.02.043
|
[9] |
Liu W, Xie Z, Jia C. Surface modification of ceramic powders by titanate coupling agent for injection molding using partially water soluble binder system. J Eur Ceram Soc, 2012, 32(5): 1001 doi: 10.1016/j.jeurceramsoc.2011.11.017
|
[10] |
Liu C, Kong X J, Wu S W, et al. Research on powder injection molding of Ti6Al4V alloys for biomedical application. Powder Metall Technol, 2018, 36(3): 217刘超, 孔祥吉, 吴胜文, 等. 生物医用Ti6Al4V合金粉末注射成形工艺研究. 粉末冶金技术, 2018, 36(3): 217
|
[11] |
Zhou W Z, Zhu J, Li Z, et al. Effects of FeCrBSi pre-alloyed powder on sintering properties of 316L stainless steel by metal injection molding. Powder Metall Technol, 2018, 36(4): 243周晚珠, 朱杰, 李志, 等. FeCrBS预合金粉末对金属注射成形316L不锈钢烧结性能的影响. 粉末冶金技术, 2018, 36(4): 243
|
[12] |
Zhu H Y. Preparation and Application of a New Polyaldehyde-Based Binder for Metal Powder Injection Molding [Dissertation]. Hefei: Hefei University of Technology, 2017朱海洋. 金属粉末注射成型用新型聚醛基粘结剂的制备及应用[学位论文]. 合肥: 合肥工业大学, 2017
|
[13] |
Dou Y K. 316L Stainless Steel Metal Injection Molding Process and Performance Research [Dissertation]. Hefei: Hefei University of Technology, 2016豆亚坤. 316L不锈钢金属注射成形工艺及性能研究[学位论文]. 合肥: 合肥工业大学, 2016
|
[14] |
Thavanayagam G, Pickering K L, Swan J E, et al. Analysis of rheological behaviour of titanium feedstocks formulated with a water-soluble binder system for powder injection moulding. Powder Technol, 2015, 269: 227 doi: 10.1016/j.powtec.2014.09.020
|
[15] |
Zhu H Z, Tian C L, He L H. Development and performance study of non-ionic waterborne epoxy resin emulsion. New Chem Mater, 2016(11): 226朱洪洲, 田春玲, 何丽红. 非离子型水性环氧树脂乳液的研制及性能研究. 化工新型材料, 2016(11): 226
|
[16] |
Zheng W, Zhu J W, Zhou C. Preparation and performance study of self-emulsifying non-ionic epoxy resin. China Plast, 2017, 285(12): 28郑帼, 朱佳文, 周存. 自乳化非离子型环氧树脂的制备及性能研究. 中国塑料, 2017, 285(12): 28
|
[17] |
Liu Y, Zhou T, Chen Z, et al. Crystallization behavior and toughening mechanism of poly (ethylene oxide) in polyoxymethylene/poly (ethylene oxide) crystalline/crystalline blends. Polym Adv Technols, 2014, 25(7): 760 doi: 10.1002/pat.3307
|
[18] |
Wen J X, Xie Z P, Cao W B. Novel fabrication of more homogeneous water-soluble binder system feedstock by surface modification of oleic acid. Ceram Int, 2016: 15530
|
[19] |
Li C L, Mei Q S, Li J Y, et al. Hall-Petch relations and strengthening of Al-ZnO composites in view of grain size relative to interparticle spacing. Scr Mater, 2018, 153: 27 doi: 10.1016/j.scriptamat.2018.04.042
|
[20] |
Gao X L, Xia T D, Wang X J. Present research status for metals refinement methods. Met Funct Mater, 2009, 16(6): 60高晓龙, 夏天东, 王晓军. 金属晶粒细化方法的研究现状. 金属功能材料, 2009, 16(6): 60
|
[21] |
Liu Q, Tang J L. Influence of carbon addition on grain refinement of magnesium-aluminum alloys. Foundry Technol, 2008, 29(11): 1498刘倩, 唐靖林. 碳对镁铝合金晶粒细化影响的研究. 铸造技术, 2008, 29(11): 1498
|