[1] |
Zhu X Y, Kwok S Y, Yuen M F, et al. Dense diamond nanoneedle arrays for enhanced intracellular delivery of drug molecules to cell lines. J Mater Sci, 2015, 50(23): 7800 doi: 10.1007/s10853-015-9351-z
|
[2] |
Scorsone E, Gattout N, Rousseau L, et al. Porous diamond pouch cell supercapacitors. Diamond Relat Mater, 2017, 76: 31 doi: 10.1016/j.diamond.2017.04.004
|
[3] |
Khanaliloo B, Mitchell M, Hryciw A C, et al. High-Q/V monolithic diamond microdisks fabricated with quasi-isotropic etching. Nano Lett, 2015, 15(8): 5131 doi: 10.1021/acs.nanolett.5b01346
|
[4] |
Li Y Y, Wan L, Wang J S, et al. Influence of temperature on etching and foaming behavior of synthetic diamond powder by iron-based pre-alloyed powders. Mater Rev, 2017, 31(14): 113 doi: 10.11896/j.issn.1005-023X.2017.014.024李颖颖, 万隆, 王俊沙, 等. 温度对铁基预合金粉腐蚀泡沫化人造金刚石微粉的影响. 材料导报, 2017, 31(14): 113 doi: 10.11896/j.issn.1005-023X.2017.014.024
|
[5] |
Morofushi Y, Matsushita H, Miki N. Microscale patterning of single crystal diamond by thermochemical reaction between sidero-metal and diamond. Precis Eng, 2011, 35(3): 490 doi: 10.1016/j.precisioneng.2011.03.003
|
[6] |
Masatsugu N, Kazuhiro N, Hiraku T, et al. Anisotropic diamond etching through thermochemical reaction between Ni and diamond in high-temperature water vapour. Sci Rep, 2018, 8(1): 6687 doi: 10.1038/s41598-018-25193-2
|
[7] |
Enriquez J I, Muttaqien F, Michiuchi M, et al. Oxidative etching mechanism of the diamond (100) surface. Carbon, 2021, 174: 36 doi: 10.1016/j.carbon.2020.11.057
|
[8] |
Li L Y, Chen X, Zhang W, et al. Characterization and formation mechanism of pits on diamond {100} face etched by molten potassium nitrite. Int J Refract Met Hard Mater, 2018, 71: 129 doi: 10.1016/j.ijrmhm.2017.11.011
|
[9] |
Xiao C J, Dou Z Q, Zhu Z D. Characterization and formation mechanism of surface morphology on diamond etched by Fe2O3 powder. Mater Rep, 2020, 34(14): 14045 doi: 10.11896/cldb.19070180肖长江, 窦志强, 朱振东. 氧化铁刻蚀金刚石表面形貌的表征及形成机理. 材料导报, 2020, 34(14): 14045 doi: 10.11896/cldb.19070180
|
[10] |
Wang J S, Wan L, Chen J, et al. Micropatterning of diamond crystallites via cobalt-catalyzed thermochemical etching. J Mater Sci, 2017, 52(2): 709 doi: 10.1007/s10853-016-0365-y
|
[11] |
Wang J S, Wan L, Chen J, et al. Anisotropy of synthetic diamond in catalytic etching using iron powder. Appl Surf Sci, 2015, 346: 388 doi: 10.1016/j.apsusc.2015.04.022
|
[12] |
Wang J S, Wan L, Chen J, et al. Surface patterning of synthetic diamond crystallites using nickel powder. Diamond Relat Mater, 2016, 66: 206 doi: 10.1016/j.diamond.2016.04.010
|
[13] |
Wei Y J, Anand L. Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystallinefcc metals. J Mech Phys Solids, 2004, 52(11): 2587 doi: 10.1016/j.jmps.2004.04.006
|
[14] |
Pehrsson P, Mercer T W, Chaney J A. Thermal oxidation of the hydrogenated diamond (100) surface. Surf Sci, 2002, 497(1-3): 13 doi: 10.1016/S0039-6028(01)01677-6
|
[15] |
Dou Z Q, Xiao C J, Ren F H, et al. Effect of holding time on etched diamond single crystal by manganese oxide. Powder Metall Technol, 2019, 37(5): 344窦志强, 肖长江, 任付豪, 等. 保温时间对锰氧化物刻蚀金刚石单晶的影响. 粉末冶金技术, 2019, 37(5): 344
|
[16] |
Xiao C J, Chen Y G, Li X L, et al. Method and mechanism analysis of improving the holding force between Ni-coated diamond and Cu-matrix bonding. Powder Metall Technol, 2020, 38(1): 25肖长江, 陈贻光, 栗晓龙, 等. 镀 Ni 金刚石与铜基结合剂间把持力的提高方法和机理分析. 粉末冶金技术, 2020, 38(1): 25
|