[1] |
Song P, Li D, Han R R, et al. Effects of surface state for Mo–Cu interlayer materials on interface bonding of multi-layer Cu/MoCu/Cu composites. Powder Metall Technol, 2023, 41(3): 249宋鹏, 李达, 韩蕊蕊, 等. Mo–Cu芯材表面状态对多层Cu/MoCu/Cu复合材料界面结合的影响. 粉末冶金技术, 2023, 41(3): 249
|
[2] |
Zhang X H, Wang Q. Research state of metal-matrix composites for electronic packaging. Micronanoelectr Technol, 2018, 55(1): 18张晓辉, 王强. 电子封装用金属基复合材料的研究现状. 微纳电子技术, 2018, 55(1): 18
|
[3] |
Zhao H, Yang Q L, Zhuang F, et al. Effecting Factors of Mo–Cu Alloy Infiltration Processing. China Molybd Ind, 2019, 43(2): 52赵虎, 杨秦莉, 庄飞, 等. Mo–Cu合金熔渗工艺影响因素研究. 中国钼业, 2019, 43(2): 52
|
[4] |
Sun A K, Wang D Z, Li Y. Mechanochemical synthesis of Mo–Cu nanocomposites powders at low temperature. Rare Met Mater Eng, 2012, 41(4): 722孙翱魁, 王德志, 李翼. 低温机械化学法制备Mo–Cu纳米复合粉末. 稀有金属材料与工程, 2012, 41(4): 722
|
[5] |
Wan L, Cheng J G, Song P, et al. Synthesis and characterization of W–Cu nanopowders by a wet-chemical method. Int J Refract Met Hard Mater, 2011, 29(4): 429 doi: 10.1016/j.ijrmhm.2011.01.006
|
[6] |
Cai J N, Wang J Z, Zhang W. Effects of agglomeration on microstructure of infiltrating Mo–Cu alloy. Hot Work Technol, 2017, 46(24): 55才剑楠, 王敬泽, 张伟. 团聚对熔渗Mo–Cu合金显微组织的影响. 热加工工艺, 2017, 46(24): 55
|
[7] |
Wu M M, Li L P, Gao X Q. Research progress of molybdenum-based composites prepared by powder metallurgy technology. Powder Metall Technol, 2021, 39(5): 462吴明明, 李来平, 高选乔, 等. 粉末冶金技术制备钼基复合材料研究进展. 粉末冶金技术, 2021, 39(5): 462
|
[8] |
Zhang Q, Cai Y F, Li X J, et al. Research progress of molybdenum alloys prepared by powder metallurgy. Powder Metall Technol, 2023, 41(1): 44张强, 蔡永丰, 李晓静, 等. 钼合金粉末冶金研究进展. 粉末冶金技术, 2023, 41(1): 44
|
[9] |
Zhang B, Liu P R, Zhang Z J, et al. Thermal deformation behavior and processing map of W80–Cu20 composite by hot compressing. Rare Met Mater Eng, 2022, 51(1): 203张兵, 刘鹏茹, 张志娟, 等. W80–Cu20复合材料热变形行为及加工图研究. 稀有金属材料与工程, 2022, 51(1): 203
|
[10] |
Srivastav A K, Chawake N, Yadav D, et al. Localized pore evolution assisted densification during spark plasma sintering of nanocrystalline W–5wt.%Mo alloy. Scripta Mater, 2019, 159: 41 doi: 10.1016/j.scriptamat.2018.09.013
|
[11] |
Wei C L, Cheng J G, Zhang M, et al. Fabrication of diamond/W–Cu functionally graded material by microwave sintering. Nuclear Eng Technol, 2022, 54(3): 975 doi: 10.1016/j.net.2021.08.035
|
[12] |
Han S L, Song Y Q, Cui S, et al. Sintering mechanism of Mo–Cu composites. Chin J Rare Met, 2009, 33(1): 53韩胜利, 宋月清, 崔舜, 等. Mo–Cu复合材料的烧结机制研究. 稀有金属, 2009, 33(1): 53
|
[13] |
Liu B, Bai P K, Cheng J. Microstructure evolution of Mo-based composites during selective laser sintering and thermal processing. J Comput Theoret Nanosci, 2008, 5(8): 1565 doi: 10.1166/jctn.2008.825
|
[14] |
Liu J Z, Dou M J, Xiang T X, et al. Study on the lnfluencing factors of properties of diamond–WC–Co cemented carbide composites prepared by liquid phase sintering. Cement Carb, 2023, 40(1): 59刘靖忠, 窦明见, 向天翔, 等. 液相烧结法制备金刚石–WC–Co硬质合金复合材料性能影响因素的研究. 硬质合金, 2023, 40(1): 59
|
[15] |
Wang R H, Yang J, Zou D N, et al. Recent progress on microwave sintering of metal materials. Mater Rep, 2021, 35(23): 23153王瑞虎, 杨军, 邹德宁, 等. 金属材料微波烧结技术的研究进展. 材料导报, 2021, 35(23): 23153
|
[16] |
Wang X G, Zhang H L, Li W J, et al. Effect of preparation process on microstructure and arc-erosion resistance of WCu30 alloy. Rare Met Mater Eng, 2015, 44(1): 140王新刚, 张怀龙, 李文静, 等. 制备工艺对WCu30合金的显微组织及抗电弧烧蚀性能的影响. 稀有金属材料与工程, 2015, 44(1): 140
|
[17] |
Han R R, Li D, Liang L H, et al. Effect of powder on uniformity of molybdenum copper alloy with high copper content. Powder Metall Ind, 2022, 32(4): 117韩蕊蕊, 李达, 梁立红, 等. 粉末对高铜含量钼铜合金均匀性的影响. 粉末冶金工业, 2022, 32(4): 117
|
[18] |
Zhang X Z. Study on Rolling Properties of Mo–Cu40 Composites Prepared by Induced Infiltration. [Dissertation]. Xi'an: Chang'an University, 2022张信哲. 诱导熔渗法制备Mo–Cu40复合材料及其轧制性能研究[学位论文]. 西安: 长安大学, 2022
|
[19] |
Guo S B, Yi Z Y, Zhang G H, et al. Effect of Cu content on microstructure and mechanical properties of Mo–Cu. Ordn Mater Sci Eng, 2020, 43(6): 17郭世柏, 易正翼, 张国辉, 等. Cu含量对Mo–Cu组织和性能的影响. 兵器材料科学与工程, 2020, 43(6): 17
|
[20] |
Chen H P, Cheng J G, Zhang M L, et al. Effect of rare earth oxide addition on the microstructure and properties of ultrafine grain W–20Cu Composites. Rare Met Mater Eng, 2018, 47(9): 2626 doi: 10.1016/S1875-5372(18)30199-1
|
[21] |
Wang J F, Bu C Y, He K, et al. Preparation of ultra-fine molybdenum‒copper composite powders and fine-grained molybdenum‒copper alloys. Powder Metall Technol, 2021, 39(1): 24王敬飞, 卜春阳, 何凯, 等. 超细钼铜复合粉体及细晶钼铜合金的制备. 粉末冶金技术, 2021, 39(1): 24
|