用粉末注射成形(PIM)制造高性能烧结材料

doi:10.3321/j.issn:1001-3784.2005.02.001

文章导航 > 粉末冶金技术 > 2005 > 23(2): 83-87

用粉末注射成形(PIM)制造高性能烧结材料[J]. 粉末冶金技术, 2005, 23(2): 83-87. doi: 10.3321/j.issn:1001-3784.2005.02.001

引用本文:

用粉末注射成形(PIM)制造高性能烧结材料[J]. 粉末冶金技术, 2005, 23(2): 83-87. doi: 10.3321/j.issn:1001-3784.2005.02.001

Fabrication of high performance sintered materials through PIM[J]. Powder Metallurgy Technology, 2005, 23(2): 83-87. doi: 10.3321/j.issn:1001-3784.2005.02.001

Citation:

Fabrication of high performance sintered materials through PIM[J]. Powder Metallurgy Technology, 2005, 23(2): 83-87. doi: 10.3321/j.issn:1001-3784.2005.02.001

用粉末注射成形(PIM)制造高性能烧结材料[J]. 粉末冶金技术, 2005, 23(2): 83-87. doi: 10.3321/j.issn:1001-3784.2005.02.001

引用本文:

用粉末注射成形(PIM)制造高性能烧结材料[J]. 粉末冶金技术, 2005, 23(2): 83-87. doi: 10.3321/j.issn:1001-3784.2005.02.001

Fabrication of high performance sintered materials through PIM[J]. Powder Metallurgy Technology, 2005, 23(2): 83-87. doi: 10.3321/j.issn:1001-3784.2005.02.001

Citation:

Fabrication of high performance sintered materials through PIM[J]. Powder Metallurgy Technology, 2005, 23(2): 83-87. doi: 10.3321/j.issn:1001-3784.2005.02.001