高级检索

碳化钨粉中WC、W2C和W的X射线定量分析

陈洪育,  邵益东

downloadPDF
文章导航 > 粉末冶金技术  > 1989 >  7(2): 108-111
陈洪育, 邵益东. 碳化钨粉中WC、W2C和W的X射线定量分析[J]. 粉末冶金技术, 1989, 7(2): 108-111.
引用本文: 陈洪育, 邵益东. 碳化钨粉中WC、W2C和W的X射线定量分析[J]. 粉末冶金技术, 1989, 7(2): 108-111.
shu
Chen Hongyu, Shao Yidong. X-Ray QUANTITATIVE ANALYSIS OF WC, W2C AND W IN TUNGSTEN CARBIDE POWDER[J]. Powder Metallurgy Technology, 1989, 7(2): 108-111.
Citation: Chen Hongyu, Shao Yidong. X-Ray QUANTITATIVE ANALYSIS OF WC, W2C AND W IN TUNGSTEN CARBIDE POWDER[J]. Powder Metallurgy Technology, 1989, 7(2): 108-111.
shu

碳化钨粉中WC、W2C和W的X射线定量分析

  • 北京有色金属研究总院

X-Ray QUANTITATIVE ANALYSIS OF WC, W2C AND W IN TUNGSTEN CARBIDE POWDER

  • Beijing Research Instittute of Non-ferrous Metals

    摘要
  • 摘要: 叙述了用X定量分析法测定WC、W2C和W的含量。在评述各种方法的基础上,提出:钨的K值由ASTM卡片查得,WC的K值由标样法求得,而W2C的K值由实验算出。文章讨论了各峰重叠及修正方法,给出了计算框图及实际测定结果。
    Abstract: Determination of WC, W2C and W contents by using X-ray quantitative analysis method has been described. On the basis of evaluating various methods, it has outlined that the K value of W was found out from ASTM cards, the K value of WC was obtained by sampling method and the K value of W2C was calculated in practice. The present paper has discussed the overlap of each peak and revision method and given out calculating frame chart and results practically determined.
    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)
  • 加载中
WeChat 点击查看大图
计量
  • 文章访问数:  222
  • HTML全文浏览量:  42
  • PDF下载量:  6
  • 被引次数: 0
出版历程

目录

    /

    返回文章
    返回

    网站版权 《粉末冶金技术》编辑部京ICP备13030111号

    本系统由 北京仁和汇智信息技术有限公司开发    百度统计