AdvancedSearch

column
Effect of heat treatment on the mechanical properties and corrosion behavior of laser powder bed fusion Ti–6Al–4V alloys
BO Zhijie, WU Xian, KONG Decheng, MAO Bo, TAN Qingbiao, YANG Mengxin, HUANG Hongshou, CHAO Qi, YANG Yi, XING Hui, ZHU Guoliang
2026, 44(5): 631-641. DOI: 10.19591/j.cnki.cn11-1974/tf.2025110009
Abstract PDF
Research progress on interface mechanisms and performance regulation of modified binders in metal injection molding
LUO Laima, HUANG Zhupin, ZAN Xiang, WU Yucheng
2026, 44(5): 642-656. DOI: 10.19591/j.cnki.cn11-1974/tf.2025100002
Abstract PDF
Non-isothermal kinetics of WO3 carbothermal reduction
BAO Kuokuo, MA Yunzhu, TANG Jiayu, LIU Wensheng
2026, 44(5): 657-666. DOI: 10.19591/j.cnki.cn11-1974/tf.2025120002
Abstract PDF
Finite element simulation of electromagnetic tomography for defects in powder metallurgy guide rod products
CHEN Caiyu, PENG Haoxiao, ZHANG Li, ZHANG Zhen, CHANG Wangjie, JI Zhengfeng, LI Xiaofeng
2026, 44(5): 667-677. DOI: 10.19591/j.cnki.cn11-1974/tf.2025110006
Abstract PDF
Magnetic and thermal properties of FeSiAl soft magnetic composites optimized by in situ synthesized Al2O3 coating through reaction time control
ZHOU Yue, CHEN Shuang, HU Huajin, HU Yuanfeng, WU Bo, WU Ruijie
2026, 44(5): 678-686. DOI: 10.19591/j.cnki.cn11-1974/tf.2025100007
Abstract PDF
Sintering behavior and densification of Ti–6Al–4V alloys in metal injection molding
TAN Zixuan, LI Zhuan, SUN Haibo, YU Xinyi, Li Yimin
2026, 44(5): 687-695. DOI: 10.19591/j.cnki.cn11-1974/tf.2025110003
Abstract PDF
Numerical simulation and experimental verification on pressing process optimization and flatness control of cemented carbide inserts
ZHU Jiangbo, LIU Yumei, HUANG Lirong, SHEN Rentao, CHEN Han, CHEN Yuhang, MING Kai
2026, 44(5): 696-706. DOI: 10.19591/j.cnki.cn11-1974/tf.2025090001
Abstract PDF
Effects of sintering temperature and atmosphere on the microstructure and properties of 430L stainless steels
DONG Xin, CAO Lijun, WANG Mingming, FENG Hongwei, HUANG Wei, CHEN Yanhong
2026, 44(5): 707-714. DOI: 10.19591/j.cnki.cn11-1974/tf.2025120016
Abstract PDF
Influence of gate position on melt flow behavior during metal powder injection molding
ZHU Yanlin, LU Fan, ZAN Xiang, LUO Laima, WU Yucheng
2026, 44(5): 715-724. DOI: 10.19591/j.cnki.cn11-1974/tf.2025110005
Abstract PDF
Process parameter optimization of 18Ni300 steels fabricated by selective laser melting
JIANG Zhenjun, CHEN Zhiping, HU Yiwen, QU Xiuyu, Wen Xuanyu, Du Yinzi, LI Runxia
2026, 44(5): 725-741. DOI: 10.19591/j.cnki.cn11-1974/tf.2025070014
Abstract PDF
Effects of copper powder morphology and sintering temperature on microstructure and properties of MIM-fabricated porous copper
WANG Hang, MO Wenjian, LU Weihong, HUA Qi, DING Hengnan, LUO Rui, WANG Andong, CAO Fuyang
2026, 44(5): 742-749. DOI: 10.19591/j.cnki.cn11-1974/tf.2025100009
Abstract PDF
Research progress on spontaneous combustion of typical metal dust exposed to moisture and heat
LIU Jiqing, PANG Lei, SUN Siheng, LI Chao
2026, 44(5): 750-759. DOI: 10.19591/j.cnki.cn11-1974/tf.2025030001
Abstract PDF
Synthesis of Ta10W alloy nano-powders by molten salt-assisted magnesiothermic reduction
PAN Bin, ZHANG Bin, WANG Hailin, HAN Lei
2026, 44(5): 760-767. DOI: 10.19591/j.cnki.cn11-1974/tf.2025120012
Abstract PDF
Preparation technology and research progress of metal powders used for 3D printing
YAO Zitong, WANG Wei, SUN Wei, ZHANG Ji, SUN Xin, ZHANG Dengkui, MENG Xu, TONG Likai, WANG Junbo
2026, 44(5): 768-779. DOI: 10.19591/j.cnki.cn11-1974/tf.2025080002
Abstract PDF