AdvancedSearch
Volume 41 Issue 1
Feb.  2023
Turn off MathJax
Article Contents
Abstract
References
Related Articles
GAO Chuhan, WU Wenheng, ZHANG Liang. Research status of additive manufacturing technology used for high temperature titanium alloys and titanium matrix composites[J]. Powder Metallurgy Technology, 2023, 41(1): 55-62. DOI: 10.19591/j.cnki.cn11-1974/tf.2022050006
Citation: GAO Chuhan, WU Wenheng, ZHANG Liang. Research status of additive manufacturing technology used for high temperature titanium alloys and titanium matrix composites[J]. Powder Metallurgy Technology, 2023, 41(1): 55-62. DOI: 10.19591/j.cnki.cn11-1974/tf.2022050006
shu

Research status of additive manufacturing technology used for high temperature titanium alloys and titanium matrix composites

  • 1.

    School of Resources and Environmental Engineering, Shanghai Polytechnic University, Shanghai 201209, China

  • 2.

    Shanghai Engineering Technology Research Center of 3D Printing Materials, Shanghai Research Institute of Materials, Shanghai 200437, China

More Information
  • Corresponding author:

    WU Wenheng, E-mail: wwhwwh2004@126.com

  • Received Date: May 10, 2022
  • Accepted Date: May 10, 2022
  • Available Online: August 06, 2022
    Graphical Abstract
    • Abstract

  • High temperature titanium alloys and titanium matrix composites (TMCs) have attracted the extensive attention in recent years due to the excellent properties, such as high specific strength, high specific stiffness, high corrosion resistance, and high temperature resistance. The mechanical properties of the titanium matrix composites are often related to the reinforcing phase microstructures. The rapid solidification of additive manufacturing technology can refine particles and improve the mechanical properties of the particle-reinforced titanium matrix composites. The research progress of high temperature titanium alloys and titanium matrix composites was reviewed in this paper. The influence of the reinforcing phase on the mechanical properties of the titanium alloys and titanium matrix composites was analyzed, and the application of additive manufacturing technology used for the titanium-based gradient functional materials was summarized. The additive manufacturing technology can not only improve the hardness and strength of the particle-reinforced titanium matrix composites, but also increase the ductility of the composites, which will become the future development trend.

    • FullText(HTML)
    • References (66)
  • [1]
    Liu Z Y, He B, Lyu T Y, et al. A review on additive manufacturing of titanium alloys for aerospace applications: directed energy deposition and beyond Ti‒6Al‒4V. JOM, 2021, 73(6): 1804 DOI: 10.1007/s11837-021-04670-6
    [2]
    Blakey-Milner B, Gradl P, Snedden G, et al. Metal additive manufacturing in aerospace: a review. Mater Des, 2021, 209: 110008 DOI: 10.1016/j.matdes.2021.110008
    [3]
    黄张洪, 曲恒磊, 邓超, 等. 航空用钛及钛合金的发展及应用. 材料导报, 2011, 25(1): 102

    Huang Z H, Qu H L, Deng C, et al. Development and application of aerial titanium and its alloys. Mater Rev, 2011, 25(1): 102
    [4]
    刘莹莹, 陈子勇, 金头男, 等. 600 ℃高温钛合金发展现状与展望. 材料导报, 2018, 32(6): 1863 DOI: 10.11896/j.issn.1005-023X.2018.11.013

    Liu Y Y, Chen Z Y, Jin T N, et al. Present situation and prospect of 600 ℃ high-temperature titanium alloys. Mater Rev, 2018, 32(6): 1863 DOI: 10.11896/j.issn.1005-023X.2018.11.013
    [5]
    Li S, Deng T S, Zhang Y H, et al. Review on the creep resistance of high-temperature titanium alloy. Trans Indian Inst Met, 2021, 74: 215 DOI: 10.1007/s12666-020-02137-x
    [6]
    蔡建明, 弭光宝, 高帆, 等. 航空发动机用先进高温钛合金材料技术研究与发展. 材料工程, 2016, 44(8): 1 DOI: 10.11868/j.issn.1001-4381.2016.08.001

    Cai J M, Mi G B, Gao F, et al. Research and development of some advanced high temperature titanium alloys for aero-engine. J Mater Eng, 2016, 44(8): 1 DOI: 10.11868/j.issn.1001-4381.2016.08.001
    [7]
    Khataee A, Flower H M, West D R F. New titanium‒aluminum‒X alloys for aerospace applications. J Mater Eng, 1988, 10(1): 37 DOI: 10.1007/BF02834112
    [8]
    王虎, 赵琳, 彭云, 等. 增材制造TiAl基合金的研究进展. 粉末冶金技术, 2022, 40(2): 110 DOI: 10.19591/j.cnki.cn11-1974/tf.2020100009

    Wang H, Zhao L, Peng Y, et al. Research progress of TiAl-based alloys fabricated by additive manufacturing. Powder Metall Technol, 2022, 40(2): 110 DOI: 10.19591/j.cnki.cn11-1974/tf.2020100009
    [9]
    曹京霞, 黄旭, 弭光宝, 等. Ti‒V‒Cr系阻燃钛合金应用研究进展. 航空材料学报, 2014, 34(4): 92 DOI: 10.11868/j.issn.1005-5053.2014.4.009

    Cao J X, Huang X, Mi G B, et al. Research progress on application technique of Ti‒V‒Cr burn resistant titanium alloys. J Aeron Mater, 2014, 34(4): 92 DOI: 10.11868/j.issn.1005-5053.2014.4.009
    [10]
    Falodun O E, Obadele B A, Oke S R, et al. Titanium-based matrix composites reinforced with particulate, microstructure, and mechanical properties using spark plasma sintering technique: a review. Int J Adv Manuf Technol, 2019, 102(5): 1689
    [11]
    Saheb N, Iqbal Z, Khalil A, et al. Spark plasma sintering of metals and metal matrix manocomposites: a review. J Nanomater, 2012, 2012: 983470
    [12]
    Patil C S, Ansari M I, Selvan R, et al. Influence of micro B4C ceramic particles addition on mechanical and wear behavior of aerospace grade Al‒Li alloy composites. Sādhanā, 2021, 46(1): 11
    [13]
    邝玮, 王敏敏, 李九霄, 等. 原位自生(TiB+La2O3)/TC4钛基复合材料的显微组织和力学性能. 机械工程材料, 2015, 39(2): 67

    Kuang W, Wang M M, Li J X, et al. Microstructure and mechanical properties of In-situ synthesized (TiB+La2O3)/TC4 titanium matrix composite. Mater Mech Eng, 2015, 39(2): 67
    [14]
    Dadkhah M, Mosallanejad M H, Iuliano L, et al. A comprehensive overview on the latest progress in the additive manufacturing of metal matrix composites: potential, challenges, and feasible solutions. Acta Metall Sinica, 2021, 34(9): 1173 DOI: 10.1007/s40195-021-01249-7
    [15]
    戚继球. 熔铸法制备TiC增强高温钛合金基复合材料组织与高温变形行为[学位论文]. 哈尔滨: 哈尔滨工业大学, 2013

    Qi J Q. Microstructure and High-Temperature Deformation Behavior of TiC Reinforced High-Temperature Titanium Alloy Matrix Composites Produced by Melting-Casting Process [Dissertation]. Harbin: Harbin Institute of Technology, 2013
    [16]
    Yamamoto T, Otsuki A, Ishihara K, et al. Synthesis of near net shape high density TiB/Ti composite. Mater Sci Eng A, 1997, A239-240: 647
    [17]
    Liu B, Liu Y, He X Y, et al. Preparation and mechanical properties of particulate-reinforced powder metallurgy titanium matrix composites. Metall Mater Trans A, 2007, 38(11): 2825 DOI: 10.1007/s11661-007-9329-9
    [18]
    Durai Murugan P, Vijayananth S, Natarajan M P, et al. A current state of metal additive manufacturing methods: A review. Mater Today, 2022, 59: 1277
    [19]
    Shakil S I, Smith N R, Yoder S P, et al. Post fabrication thermomechanical processing of additive manufactured metals: A review. J Manuf Process, 2022, 73: 757 DOI: 10.1016/j.jmapro.2021.11.047
    [20]
    Ahn D G. Direct metal additive manufacturing processes and their sustainable applications for green technology: A review. Int J Precis Eng Manuf, 2016, 3(4): 381
    [21]
    Pototzky P, Maier H J, Christ H J. Thermomechanical fatigue behavior of the high-temperature titanium alloy IMI 834. Metall Mater Trans A, 1998, 29(12): 2995 DOI: 10.1007/s11661-998-0207-x
    [22]
    王清江, 刘建荣, 杨锐. 高温钛合金的现状与前景. 航空材料学报, 2014, 34(4): 1 DOI: 10.11868/j.issn.1005-5053.2014.4.001

    Wang Q J, Liu J R, Yang R. High temperature titanium alloys: status and perspective. J Aeron Mater, 2014, 34(4): 1 DOI: 10.11868/j.issn.1005-5053.2014.4.001
    [23]
    王瑞琴, 葛鹏, 侯鹏, 等. 固溶和时效温度对IMI834钛合金板材组织和性能的影响. 金属热处理, 2021, 46(3): 96 DOI: 10.13251/j.issn.0254-6051.2021.03.019

    Wang R Q, Ge P, Hou P, et al. Effects of solution treatment and aging temperature on microstructure and mechanical properties of IMI834 titanium alloy plate. Heat Treat Met, 2021, 46(3): 96 DOI: 10.13251/j.issn.0254-6051.2021.03.019
    [24]
    史蒲英, 张永强, 孙峰, 等. 固溶时效温度对IMI834钛合金组织和性能的影响. 特种铸造及有色合金, 2017, 37(9): 936 DOI: 10.15980/j.tzzz.2017.09.003

    Shi P Y, Zhang Y Q, Sun F, et al. Influences of solution and aging temperature on microstructure and mechanical properties of the IM1834 alloy. Spec Cast Nonferrous Alloys, 2017, 37(9): 936 DOI: 10.15980/j.tzzz.2017.09.003
    [25]
    车晋达, 姜贝贝, 王清, 等. 微量元素添加对Ti1100合金的高温抗氧化及耐蚀性能影响. 稀有金属材料与工程, 2018, 47(5): 1471

    Che J D, Jiang B B, Wang Q, et al. Effects of minor additions of elements into Ti1100 on elevated temperature oxidation- and corrosion-resistance. Rare Met Mater Eng, 2018, 47(5): 1471
    [26]
    付艳艳, 宋月清, 惠松骁, 等. 航空用钛合金的研究与应用进展. 稀有金属, 2006, 30(6): 850 DOI: 10.3969/j.issn.0258-7076.2006.06.028

    Fu Y Y, Song Y Q, Hui S X, et al. Research and application of typical aerospace titanium alloys. Chin J Rare Met, 2006, 30(6): 850 DOI: 10.3969/j.issn.0258-7076.2006.06.028
    [27]
    何春艳, 张利军. 国内外高温钛合金的发展与应用. 世界有色金属, 2016(1): 21

    He C Y, Zhang L J. The development and application of high temperature titanium alloy at domestic and abroad. World Nonferrous Met, 2016(1): 21
    [28]
    付彬国. 合金元素对铸造Ti-1100合金组织及性能影响[学位论文]. 哈尔滨: 哈尔滨工业大学, 2015

    Fu B G. Effects of Alloying Elements on Microstructures and Properties of Cast Ti-1100 Alloys [Dissertation]. Harbin: Harbin Institute of Technology, 2015
    [29]
    郭杰, 岳颗, 胡钊华, 等. 航空航天用Ti60高温钛合金铸锭制备工艺. 钢铁钒钛, 2021, 42(6): 138 DOI: 10.7513/j.issn.1004-7638.2021.06.019

    Guo J, Yue K, Hu Z H, et al. Preparation of Ti60 high temperature titanium alloy ingot for aerospace. Iron Steel Vanadium Titanium, 2021, 42(6): 138 DOI: 10.7513/j.issn.1004-7638.2021.06.019
    [30]
    汤海芳, 赵永庆, 洪权, 等. 稀土元素对高温钛合金组织和性能的影响. 钛工业进展, 2010, 27(1): 16 DOI: 10.3969/j.issn.1009-9964.2010.01.003

    Tang H F, Zhao Y Q, Hong Q, et al. Effects of rare earth elements on the structure and properties of high-temperature titanium alloy. Titanium Ind Prog, 2010, 27(1): 16 DOI: 10.3969/j.issn.1009-9964.2010.01.003
    [31]
    赵子博, 王清江, 刘建荣, 等. Ti60合金棒材中的织构及其对拉伸性能的影响. 金属学报, 2015, 51(5): 561 DOI: 10.11900/0412.1961.2014.00451

    Zhao Z B, Wang Q J, Liu J R, et al. Texture of Ti60 alloy precision bars and its effect of tensile properties. Acta Met Sin, 2015, 51(5): 561 DOI: 10.11900/0412.1961.2014.00451
    [32]
    赵亮, 刘建荣, 王清江, 等. 析出相对Ti60钛合金蠕变和持久性能的影响. 材料研究学报, 2009, 23(1): 1 DOI: 10.3321/j.issn:1005-3093.2009.01.001

    Zhao L, Liu J R, Wang Q J, et al. Effect of precipitates on the high temperature creep and creep rupture properties of Ti60 alloy. Chin J Mater Res, 2009, 23(1): 1 DOI: 10.3321/j.issn:1005-3093.2009.01.001
    [33]
    赵会宇, 张媚, 于佳石, 等. 石墨烯/Ti60复合材料组织与力学性能研究. 钛工业进展, 2022, 39(2): 29 DOI: 10.11782/j.issn.1009-9964.2022.2.tgyjz202202006

    Zhao H Y, Zhang M, Yu J S, et al. Research on microstructure and mechanical properties of graphene/Ti60 composites. Titanium Ind Prog, 2022, 39(2): 29 DOI: 10.11782/j.issn.1009-9964.2022.2.tgyjz202202006
    [34]
    谢洪志, 刘广鑫, 彭皓云, 等. Ti65钛合金板材高温力学性能及影响因素. 兵器材料科学与工程, 2022, 45(2): 26 DOI: 10.14024/j.cnki.1004-244x.20211129.001

    Xie H Z, Liu G X, Peng H Y, et al. High temperature mechanical properties and influencing factors of Ti65 titanium alloy sheet. Ordn Mater Sci Eng, 2022, 45(2): 26 DOI: 10.14024/j.cnki.1004-244x.20211129.001
    [35]
    Zhao D, Fan J K, Zhang Z X, et al. Microstructure and texture variations in high temperature titanium alloy Ti65 sheets with different rolling modes and heat treatments. Materials, 2020, 13(11): 2466 DOI: 10.3390/ma13112466
    [36]
    刘世锋, 宋玺, 薛彤, 等. 钛合金及钛基复合材料在航空航天的应用和发展. 航空材料学报, 2020, 40(3): 77 DOI: 10.11868/j.issn.1005-5053.2020.000061

    Liu S F, Song X, Xue T, et al. Application and development of titanium alloy and titanium matrix composites in aerospace field. J Aeron Mater, 2020, 40(3): 77 DOI: 10.11868/j.issn.1005-5053.2020.000061
    [37]
    Nyanor P, El-Kady O, Yehia H M, et al. Effect of bimodal-sized hybrid TiC-CNT reinforcement on the mechanical properties and coefficient of thermal expansion of aluminium matrix composites. Met Mater Int, 2021, 27(4): 753 DOI: 10.1007/s12540-020-00802-w
    [38]
    Hu Y B, Cong W L, Wang X L, et al. Laser deposition-additive manufacturing of TiB‒Ti composites with novel three-dimensional quasi-continuous network microstructure: effects on strengthening and toughening. Composites Part B, 2018, 133: 91 DOI: 10.1016/j.compositesb.2017.09.019
    [39]
    郑博文, 袁晓光, 董福宇, 等. La2O3含量对(TiC+TiB)/IMI834复合材料组织及耐磨性的影响. 铸造, 2021, 70(8): 933 DOI: 10.3969/j.issn.1001-4977.2021.08.006

    Zheng B W, Yuan X G, Dong F Y, et al. Effect of La2O3 content on microstructures and wear resistance of IM834 matrix composites. Foundry, 2021, 70(8): 933 DOI: 10.3969/j.issn.1001-4977.2021.08.006
    [40]
    Qin Y X, Zhang D, Lu W J, et al. Oxidation behavior of in situ-synthesized (TiB+TiC)/Ti6242 composites. Oxid Met, 2006, 66(5): 253
    [41]
    神祥博. SPS制备TiB增强Ti基复合材料的组织结构和力学性能研究[学位论文]. 北京: 北京理工大学, 2014

    Shen X B. Microstructure and Mechanical Properties of in situ TiB Reinforced Titanium Matrix Compositre Prepared by SPS [Dissertation]. Beijing: Beijing Institute of Technology, 2014
    [42]
    Attar H, Bönisch M, Calin M, et al. Comparative study of microstructures and mechanical properties of in situ Ti–TiB composites produced by selective laser melting, powder metallurgy, and casting technologies. J Mater Res, 2014, 29(17): 1941 DOI: 10.1557/jmr.2014.122
    [43]
    Li Y Y, Zhu F W, Qiao Z L. Study on mechanical alloying of TiB2 particulate reinforced titanium matrix composites. Appl Mech Mater, 2018, 875: 41 DOI: 10.4028/www.scientific.net/AMM.875.41
    [44]
    张亮亮, 周阳, 刘世锋, 等. 模具钢增材制造及其性能的研究进展. 中国冶金, 2022, 32(3): 1 DOI: 10.13228/j.boyuan.issn1006-9356.20210661

    Zhang L L, Zhou Y, Liu S F, et al. Research progress in additive manufacturing and properties of die steel. China Metall, 2022, 32(3): 1 DOI: 10.13228/j.boyuan.issn1006-9356.20210661
    [45]
    Radhakrishnan M, Hassan M M, Long B E, et al. Microstructures and properties of Ti/TiC composites fabricated by laser-directed energy deposition. Addit Manuf, 2021, 46: 102198
    [46]
    Attar H, Löber L, Funk A, et al. Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting. Mater Sci Eng A, 2015, 625: 350 DOI: 10.1016/j.msea.2014.12.036
    [47]
    Attar H, Prashanth K G, Zhang L C, et al. Effect of powder particle shape on the properties of in situ Ti–TiB composite materials produced by selective laser melting. J Mater Sci Technol, 2015, 31(10): 1001 DOI: 10.1016/j.jmst.2015.08.007
    [48]
    Li H L, Jia D C, Yang Z H, et al. Effect of heat treatment on microstructure evolution and mechanical properties of selective laser melted Ti–6Al–4V and TiB/Ti–6Al–4V composite: a comparative study. Mater Sci Eng A, 2021, 801: 140415 DOI: 10.1016/j.msea.2020.140415
    [49]
    Cai C, Radoslaw C, Zhang J L, et al. In-situ preparation and formation of TiB/Ti‒6Al‒4V nanocomposite via laser additive manufacturing: microstructure evolution and tribological behavior. Powder Technol, 2019, 342: 73 DOI: 10.1016/j.powtec.2018.09.088
    [50]
    Sato Y, Tsukamoto M, Masuno S, et al. Investigation of the microstructure and surface morphology of a Ti6Al4V plate fabricated by vacuum selective laser melting. Appl Phys A, 2016, 122: 439 DOI: 10.1007/s00339-016-9996-8
    [51]
    Santos E C, Shiomi M, Osakada K, et al. Rapid manufacturing of metal components by laser forming. Int J Mach Tools Manuf, 2006, 46(12): 1459
    [52]
    Yan L, Li W, Chen X Y, et al. Simulation of cooling rate effects on Ti–48Al–2Cr–2Nb crack formation in direct laser deposition. JOM, 2017, 69(3): 586 DOI: 10.1007/s11837-016-2211-8
    [53]
    Hong C, Gu D D, Dai D H, et al. Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures. Opt Laser Technol, 2013, 54: 98 DOI: 10.1016/j.optlastec.2013.05.011
    [54]
    Wang L, Cheng J, Qiao Z H, et al. Tribological behaviors of in situ TiB2 ceramic reinforced TiAl-based composites under sea water environment. Ceram Int, 2017, 43(5): 4314 DOI: 10.1016/j.ceramint.2016.12.075
    [55]
    丁红燕, 周长培, 章跃, 等. Ti/TiB2多层膜在Hank's模拟体液中耐蚀性研究. 真空科学与技术学报, 2014, 34(6): 611

    Ding H Y, Zhou C P, Zhang Y, et al. Corrosion resistance of Ti/TiB2 multilayers in Hank's solution. Chin J Vacuum Sci Technol, 2014, 34(6): 611
    [56]
    钦兰云, 门继华, 赵朔, 等. TiB2含量对选区激光熔化TiB/Ti‒6Al‒4V复合材料组织及力学性能的影响. 中国激光, 2021, 48(6): 0602102 DOI: 10.3788/CJL202148.0602102

    Qin L Y, Men J H, Zhao S, et al. Effect of TiB content on microstructure and mechanical properties of TiB/Ti‒6Al‒4V composites formed by selective laser melting. Chin J Lasers, 2021, 48(6): 0602102 DOI: 10.3788/CJL202148.0602102
    [57]
    Kasperovich G, Haubrich J, Gussone J, et al. Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting. Mater Des, 2016, 105: 160 DOI: 10.1016/j.matdes.2016.05.070
    [58]
    Li H L, Yang Z H, Cai D L, et al. Microstructure evolution and mechanical properties of selective laser melted bulk-form titanium matrix nanocomposites with minor B4C additions. Mater Des, 2020, 185: 108245 DOI: 10.1016/j.matdes.2019.108245
    [59]
    Fang M H, Han Y F, Shi Z S, et al. Embedding boron into Ti powder for direct laser deposited titanium matrix composite: Microstructure evolution and the role of nano-TiB network structure. Composites Part B, 2021, 211: 108683 DOI: 10.1016/j.compositesb.2021.108683
    [60]
    Xiao L H, Huang S Q, Wang Y, et al. Preparation and characterization of the anti-high temperature oxidation borosilicate glass coating on TC4 titanium alloy. J Mater Eng Perform, 2022, 31(1): 534 DOI: 10.1007/s11665-021-06189-y
    [61]
    丁超. 粉末冶金Ti600合金组织和性能的研究[学位论文]. 辽宁: 沈阳工业大学, 2019

    Ding C. Microstructures and Properties of Powder Metallurgy Ti600 Alloy [Dissertation]. Shenyang: Shenyang University of Technology, 2019
    [62]
    Bermingham M J, Mcdonald S D, Dargusch M S. Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti‒6Al‒4V produced by additive manufacturing. Mater Sci Eng A, 2018, 719: 1 DOI: 10.1016/j.msea.2018.02.012
    [63]
    Feng Y Q, Feng K, Yao C W, et al. Microstructure and properties of in-situ synthesized (Ti3Al + TiB)/Ti composites by laser cladding. Mater Des, 2018, 157: 258 DOI: 10.1016/j.matdes.2018.07.045
    [64]
    Feng Y Q, Feng K, Yao C W, et al. Effect of LaB6 addition on the microstructure and properties of (Ti3Al + TiB)/Ti composites by laser cladding. Mater Des, 2019, 181: 107959 DOI: 10.1016/j.matdes.2019.107959
    [65]
    Nartu M S K K Y, Pole M, Mantri S A, et al. Process induced multi-layered titanium-boron carbide composites via additive manufacturing. Add Manuf, 2021, 46: 102156
    [66]
    Zhang Y Z, Wei Z M, Shi L K, et al. Characterization of laser powder deposited Ti–TiC composites and functional gradient materials. J Mater Process Technol, 2008, 206(1): 438
    • Related Articles

  • Related Articles

    [1]XIA Pengzhao, XU Ying, CAI Yanqing, ZHAO Sitan, SONG Pan. Effect of ball milling process on mechanical properties of medical Ti–Mg composites[J]. Powder Metallurgy Technology, 2024, 42(2): 192-199. DOI: 10.19591/j.cnki.cn11-1974/tf.2021090013
    [2]LI Shang-jie, YANG Hua. Effect of cobalt concentration gradient by infiltration sintering on the mechanical properties of polycrystalline diamond compacts[J]. Powder Metallurgy Technology, 2021, 39(6): 526-531. DOI: 10.19591/j.cnki.cn11-1974/tf.2021090014
    [3]YANG Yu-cheng, PAN Yu, LU Xin, YU Ai-hua, HUI Tai-long, LIU Yan-jun. Research progress on particle-reinforced titanium matrix composites prepared by powder metallurgy method[J]. Powder Metallurgy Technology, 2020, 38(2): 150-158. DOI: 10.19591/j.cnki.cn11-1974/tf.2020.02.011
    [4]CHEN Qiao-wang, DENG Ying, JIANG Shan, JIANG Zhong-tao, JING Xiao-long, CHEN Hui, LI Li. Functionally graded cemented carbides of WC-TiC-Co with cubic rich surface[J]. Powder Metallurgy Technology, 2020, 38(1): 36-41. DOI: 10.19591/j.cnki.cn11-1974/tf.2020.01.006
    [5]TAN Ping, LI Zeng-feng, GE Yuan, ZHAO Shao-yang, WANG Li-qing, SHEN Lei, YIN Jing-ou, WEN Jia-yi. Effect of powder sizes on the mechanical properties of porous titanium sheets prepared by rolling and sintering process[J]. Powder Metallurgy Technology, 2020, 38(1): 30-35. DOI: 10.19591/j.cnki.cn11-1974/tf.2020.01.005
    [6]Cui Hailong, Zhao Zhongmin, Zhang Long. Progress in functionally graded materials produced by powder metallurgy[J]. Powder Metallurgy Technology, 2013, 31(4): 304-308,313. DOI: 10.3969/j.issn.1001-3784.2013.04.012
    [7]Shi Liuyong, Zhang Shouquan, Huang Jihua. Advances information of WC-Co functionally graded hard metals[J]. Powder Metallurgy Technology, 2010, 28(4): 305-312.
    [8]Feng Ping, He Yuehui, Xiao Yifeng, Xie Hong. Advances information of functionally graded hard materials by diffusion in situ[J]. Powder Metallurgy Technology, 2007, 25(4): 297-304.
    [9]Processing of Functionally Graded Ti(C,N)-based Cermets[J]. Powder Metallurgy Technology, 2002, 20(4): 195-199. DOI: 10.3321/j.issn:1001-3784.2002.04.001
    [10]Yang Yunzhi, Chen Zhiqing, Tian Jiemo. Application of Powder Metallurgy Technology and its Preparationof Bio-functionally Gradient Materials[J]. Powder Metallurgy Technology, 1998, 16(4): 292-299.

  • Cited by

    Periodical cited type(5)

    1. 弭光宝，谭勇，陈航，李培杰，张学军. 增材制造600℃高温钛合金研究进展. 航空材料学报. 2024(01): 15-30 .
    2. 高翔，鲁晓楠，李建超，王欢，彭华新. 增材制造钛基复合材料体系与组织结构设计. 复合材料学报. 2024(04): 1633-1652 .
    3. 郭克星. 增材制造钛合金组织及性能研究现状. 有色金属加工. 2024(05): 1-7+18 .
    4. 任嘉腾，李鹏远，徐俊杰. TiB_w/TA19(Si, N)复合材料组织与力学性能研究. 铜业工程. 2024(05): 122-131 .
    5. 王晓璐. 拓扑优化设计及嵌入式技术在3D打印中的应用. 粉末冶金技术. 2023(03): 241-248 . 本站查看

    Other cited types(7)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (596) PDF downloads (285) Cited by(12)
    Related

    Website Copyright Editorial Office of Powder Metallurgy Technology京ICP备13030111号

    Supported by: Beijing Renhe Information Technology Co., Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return