Application of mechanical ball-milling technology in material preparation

ZHANG Gui-yin; ZHA Wu-sheng; CHEN Xiu-li; YAN Jun

doi:10.19591/j.cnki.cn11-1974/tf.2018.04.013

Volume 36 Issue 4

Dec. 2020

Turn off MathJax

Article Contents

Article Navigation > Powder Metallurgy Technology > 2018 > 36(4): 315-318

ZHANG Gui-yin, ZHA Wu-sheng, CHEN Xiu-li, YAN Jun. Application of mechanical ball-milling technology in material preparation[J]. Powder Metallurgy Technology, 2018, 36(4): 315-318. doi: 10.19591/j.cnki.cn11-1974/tf.2018.04.013

Citation:

ZHANG Gui-yin, ZHA Wu-sheng, CHEN Xiu-li, YAN Jun. Application of mechanical ball-milling technology in material preparation[J]. Powder Metallurgy Technology, 2018, 36(4): 315-318. doi: 10.19591/j.cnki.cn11-1974/tf.2018.04.013

Citation:

PDF( 387 KB)

Application of mechanical ball-milling technology in material preparation

doi: 10.19591/j.cnki.cn11-1974/tf.2018.04.013

School of Materials Science and Engineering, Xihua University, Chengdu 610039, China

More Information

Corresponding author: ZHA Wu-sheng, E-mail: 1434758301@qq.com
Received Date: 2018-02-25
Publish Date: 2018-08-27

Abstract

Abstract

The application and mechanism of mechanical ball-milling technology in material preparation, containing mechanical alloying, mechanical milling, and mechanical coating, were summarized in this paper. The advantages and disadvantages of mechanical ball-milling technology in material preparation were discussed. Based on the previous researches, the future direction of mechanical ball-milling technology was prospected.
- mechanical ball-milling technology,
- mechanical alloying,
- mechanical milling,
- mechanical coating

FullText(HTML)

References(26)

References

[1]	Benjamin J S. Dispersion strengthened superalloys by mechanical alloying. Metall Trans, 1970, 1(10): 2934 https://ui.adsabs.harvard.edu/abs/1970MT......1.2943B/abstract
[2]	Atzmon M. In situ thermal observation of explosive compound-formation reaction during mechanical alloying. Phys Rev Lett, 1990, 64(4): 487 doi: 10.1103/PhysRevLett.64.487
[3]	张先胜, 冉广. 机械合金化的反应机制研究进展. 金属热处理, 2003, 28(6): 28 doi: 10.3969/j.issn.0254-6051.2003.06.009 Zhang X S, Ran G. Review of the reactive mechanism in mechanical alloying. Heat Treat Met, 2003, 28(6): 28 doi: 10.3969/j.issn.0254-6051.2003.06.009
[4]	Zaluski L, Zaluska A, Strom-Olsen J O. Hydrogen absorption in nanocrystalline Mg₂Ni formed by mechanical alloying. J Alloys Compd, 1995, 217(2): 245 doi: 10.1016/0925-8388(94)01348-9
[5]	Liang G X, Huot J, Boily S, et al. Hydrogin storage in mechanically milled Mg–LaNi₅ and MgH₂–LaNi₅ composites. J Alloys Compd, 2000, 297(1-2): 261 doi: 10.1016/S0925-8388(99)00592-7
[6]	徐安莲, 刘守平, 周上祺, 等. 机械合金化的研究进展. 重庆大学学报, 2005, 28(11): 84 doi: 10.11835/j.issn.1000-582X.2005.11.023 Xu A L, Liu S P, Zhou S Q, et al. Progress in studies on mechanical alloying, J Chongqing Univ, 2005, 28(11): 84 doi: 10.11835/j.issn.1000-582X.2005.11.023
[7]	Ivanov E, Griqorieva T, Golubkova G, et al. Synthesis of nickel aluminides by mechanical alloying. Mater Lett, 1988, 7(1-2): 51 doi: 10.1016/0167-577X(88)90081-X
[8]	李宁, 耿刚强, 张海宝, 等. 机械合金化–退火法制备铁硅金属间化合物. 热加工工艺, 2005(8): 21 doi: 10.3969/j.issn.1001-3814.2005.08.009 Li N, Geng G Q, Zhang H B, et al. Fe–Si intermetallics fabricated by mechanical alloying and annealing treatment. Hot Work Technol, 2005(8): 21 doi: 10.3969/j.issn.1001-3814.2005.08.009
[9]	Koch C C. The synthesis and structure of nanocrystalline materials produced by mechanical attrition: A review. Nanostruct Mater, 1993, 2(2): 109 doi: 10.1016/0965-9773(93)90016-5
[10]	Eckert J, Schultz L, Urban K. Formation of quasicrystals by mechanical alloying. Appl Phys Lett, 1989, 55(2): 117 doi: 10.1063/1.102394
[11]	卡恩R W. 材料科学与技术丛书: 金属与合金工艺. 北京: 科学出版社, 1999 Kahn R W. Materials Science and Technology Series: Metal and Alloy Technology. Beijing: Science Press, 1999
[12]	陶静梅, 黄素贞, 徐孟春, 等. 纯Al纳米晶体材料的力学性能研究. 材料工程, 2009(6): 67 doi: 10.3969/j.issn.1001-4381.2009.06.016 Tao J M, Huang S Z, Xu M C, et al. Study on the mechanical properties of pure bulk Al with nanocrystalline. J Mater Eng, 2009(6): 67 doi: 10.3969/j.issn.1001-4381.2009.06.016
[13]	Zhang X, Wang H, Scatterergood R O, et al. Evolution of microstructure and mechanical properties of in situ consolidated bulk ultra-fine-grained and nanocrystalline Zn prepared by ball milling. Mater Sci Eng A, 2003, 344(1-2): 175 doi: 10.1016/S0921-5093(02)00422-7
[14]	Bonetti E, Pasquini L, Sampaolesi E. The influence of grain size on the mechanical properties of nanocrystalline aluminum. Nanostruct Mater, 1997, 9(1-8): 611 doi: 10.1016/S0965-9773(97)00137-2
[15]	Hayes R W, Witkin D, Zhou F, et al. Deformation and activation volumes of cryomilled ultrafine-grained aluminum. Acta Mater, 2004, 52(14): 4259 doi: 10.1016/j.actamat.2004.05.042
[16]	韩宝军, 何琼, 杨妙. 机械研磨处理AZ91D镁合金表面晶粒细化研究. 表面技术, 2014, 43(4): 32 https://www.cnki.com.cn/Article/CJFDTOTAL-BMJS201404007.htm Han B J, He Q, Yang M. Investigation of surface grain refinement of AZ91D magnesium alloys by surface mechanical attrition treatment. Surf Technol, 2014, 43(4): 32 https://www.cnki.com.cn/Article/CJFDTOTAL-BMJS201404007.htm
[17]	Hao L, Lu Y, Sato H, et al. Influence of metal properties on the formation and evolution of metal coatings during mechanical coating. Metall Mater Trans A, 2013, 44(6): 2717 doi: 10.1007/s11661-013-1632-z
[18]	Tang X, Zha W S, Zhang G Y, et al. The effects of oxidation temperature on the microstructure and photocatalytic activity of the TiO₂ coating. Mater Sci, 2017, 23(2): 103 https://matsc.ktu.lt/index.php/MatSc/article/view/15590
[19]	沈以赴, 李永灿, 陈成, 等. Al₂O₃陶瓷表面机械合金化制备铜涂层研究. 南京航空航天大学学报, 2012, 44(5): 762 doi: 10.3969/j.issn.1005-2615.2012.05.024 Shen Y F, Li Y C, Chen C, et al. Investigation of coating of alumina ceramic surface by metallic Cu through mechanical alloying. J Nanjing Univ Aeronaut Astronaut, 2012, 44(5): 762 doi: 10.3969/j.issn.1005-2615.2012.05.024
[20]	Wang A P, Wang Z M, Zhang J, et al. Deposition of HVAF-sprayed Ni-based amorphous metallic coatings. J Alloys Compd, 2007, 440(1-2): 225 doi: 10.1016/j.jallcom.2006.09.003
[21]	丁润东, 沈以赴, 李博, 等. 机械合金化制备Ti–Cu非晶涂层. 中国有色金属学报, 2012, 22(7): 2023 https://www.cnki.com.cn/Article/CJFDTOTAL-ZYXZ201207024.htm Ding R D, Shen Y F, Li B, et al. Preparation of amorphous Ti–Cu coating by mechanical alloying. Chin J Nonferrous Met, 2012, 22(7): 2023 https://www.cnki.com.cn/Article/CJFDTOTAL-ZYXZ201207024.htm
[22]	Ding D, Zhou B, Fu W Y, et al. Varied crystalline orientation of anatase TiO₂ nanotubes from[101] to[001] promoted by TiF₆^2- ions and their enhanced photoelectrochemical performance. J Mater Sci, 2018, 53(5): 3332 doi: 10.1007/s10853-017-1754-6
[23]	Seadira T W P, Sadanandam G, Ntho T, et al. Preparation and characterization of metals supported on nanostructured TiO₂ hollow spheres for production of hydrogen via photocatalytic reforming of glycerol. Appl Catal B, 2018, 222: 133 doi: 10.1016/j.apcatb.2017.09.072
[24]	Deng X Y, Zhang H X, Guo R N, et al. Effect of Ti³⁺ on enhancing photocatalytic and photoelectrochemical properties of TiO₂ nanorods/nanosheets photoelectrode. Sep Purif Technol, 2018, 192: 329 doi: 10.1016/j.seppur.2017.10.029
[25]	Yoshida H, Lu Y, Nakayama H, et al. Fabrication of TiO₂ film by mechanical coating technique and its photocatalytic activity. J Alloys Compd, 2009, 475(1): 383 https://www.sciencedirect.com/science/article/pii/S092583880801147X
[26]	Takaya S, Lu Y, Guan S J, et al. Fabrication of the photocatalyst thin films of nano-structured potassium titanate by molten salt treatment and its photocatalytic activity. Surf Coat Technol, 2015, 275: 260 doi: 10.1016/j.surfcoat.2015.05.009