Citation: | TANG Xuezhi, WANG Zhijun, ZHANG Xuepeng, XU Yongjie. Dynamic compressive behavior of PTFE/Cu composite materials[J]. Powder Metallurgy Technology, 2024, 42(2): 153-158, 164. doi: 10.19591/j.cnki.cn11-1974/tf.2021080008 |
[1] |
解挺, 江凯, 丁亚. 填料粒径对Cu/PTFE复合材料摩擦学性能影响的数值模拟. 摩擦学学报, 2016, 36(1): 35
Xie T, Jiang K, Ding Y. Numerical simulation of influence of filler size on tribological properties of Cu/PTFE composites. Tribology, 2016, 36(1): 35
|
[2] |
杨玉明, 李伟, 刘平, 等. 铜掺杂Ni−P−PTFE涂层的微观结构、耐蚀性和力学性能. 功能材料, 2018, 49(7): 7082
Yang Y M, Li W, Liu P, et al. Microstructures corrosionresistance and mechanical properties of Ni−Cu−PTFE composite coatings. J Funct Mater, 2018, 49(7): 7082
|
[3] |
夏艳红. PTFE/Cu复合材料干/湿环境摩擦学性能研究[学位论文]. 秦皇岛: 燕山大学, 2016
Xia Y H. Research on Tribology Properties of PTFE Filled with Cu Composite in Both Dry and Seawater Environment [Dissertation]. Qinhuangdao: Yanshan University, 2016
|
[4] |
Wang L F, Dong Y, Tao J, et al. Study of the mechanisms of contact electrification and charge transfer between polytetrafluoroethylene and metals. J Phys D Appl Phys, 2020, 53: 285302 doi: 10.1088/1361-6463/ab813e
|
[5] |
Xie T, Xu Z X, Yan Z M, et al. Study on the friction and wear behaviors of Cu/PTFE self-lubricating composites. Appl Mech Mater, 2012, 130-134: 1466
|
[6] |
Duan N Q, Gao Y H, Wang J Y, et al. The properties of the sintered copper powder liner. J Wuhan Univ Technol Mater Sci, 2014, 29(2): 269 doi: 10.1007/s11595-014-0906-7
|
[7] |
Xu Y J, Wang Z J, Wu G D, et al. Density effect of PTFE-copper powder metallurgy liner material on the perforation performance of shaped charge jets. Strength Mater, 2019, 51(4): 616 doi: 10.1007/s11223-019-00108-2
|
[8] |
Li Y L, Yin J P, Liu T X. Experimental study on mechanical properties of modified polytetrafluoroethylene. J Meas Sci Instrum, 2015, 6(4): 390
|
[9] |
刘同鑫. PTFE/Cu材料的力学性能研究及应用[学位论文]. 太原: 中北大学, 2015
Liu T X. Study on the Mechanical Performance and Application of PTFE/Cu Materials [Dissertation]. Taiyuan: North of China University, 2015
|
[10] |
唐琦. 材料密度对改性PTFE毁伤元性能影响研究[学位论文]. 太原: 中北大学, 2017
Tang Q. Study on the Influence of Density to the Performance of Modified PTFE Kill Elements [Dissertation]. Taiyuan: North of China University, 2017
|
[11] |
Borkowski J, Wilk Z, Koslik P, et al. Application of sintered liners for explosively formed projectile charges. Int J Impact Eng, 2018, 118: 91 doi: 10.1016/j.ijimpeng.2018.04.009
|
[12] |
刘义伦, 曾洋. 不同成型工艺下钕铁硼模压成型过程的力学行为分析. 粉末冶金技术, 2020, 38(4): 262
Liu Y L, Zeng Y. Mechanical behavior analysis on the compression molding process of NdFeB by different molding technology. Powder Metall Technol, 2020, 38(4): 262
|
[13] |
Tang X Z, Wang Z J, Yin J P, et al. Effect of the fabrication technique on compressive properties of Cu-PTFE composites. Adv Mater Sci Eng, 2021, 2021: 5518172
|
[14] |
Brown Eric N, Dattelbaum Dana M. The role of crystalline phase on fracture and microstructure evolution of polytetrafluoroethylene (PTFE). Polymer, 2005, 46(9): 3056 doi: 10.1016/j.polymer.2005.01.061
|
[15] |
Feng B, Fang X, Wang H X, et al. The effect of crystallinity on compressive properties of Al-PTFE. Polymers, 2016, 8(10): 356 doi: 10.3390/polym8100356
|
[16] |
Jordan Jennifer L, Siviour Clive R, Foley Jason R. Compressive properties of extruded polytetrafluoroethylene. Polymer, 2007, 48(14): 4184 doi: 10.1016/j.polymer.2007.05.038
|
[17] |
张成功, 范景莲, 成会朝. W质量分数对Mo−W合金组织结构与力学性能的影响. 粉末冶金技术, 2020, 38(1): 18
Zhang C G, Fan J L, Cheng H C. Effects of W content by mass on the microstructure and mechanical properties of Mo–W alloy. Powder Metall Technol, 2020, 38(1): 18
|
[18] |
李朝, 李楠, 柳学全, 等. WC质量分数对Ti(C0.7N0.3)基金属陶瓷组织和性能的影响. 粉末冶金技术, 2018, 36(2): 100
Li C, Li N, Liu X Q, et al. Effect of WC mass fraction on the microstructure and properties of Ti(C0.7N0.3)-based cermets. Powder Metall Technol, 2018, 36(2): 100
|
[19] |
罗晓龙, 刘军, 胡仙平. 冲击加载条件下金属粉末的动态力学性能分析. 粉末冶金技术, 2018, 36(2): 111
Luo X L, Liu J, Hu X P. Analysis on dynamic mechanics performance of metal powders by impact loading. Powder Metall Technol, 2018, 36(2): 111
|
[20] |
肖艳文, 徐峰悦, 郑元枫, 等. 冷压成型活性材料准静态压缩特性. 北京理工大学学报, 2017, 37(4): 337
Xiao Y W, Xu F Y, Zheng Y F, et al. Quasi-static compression properties of cold isostatically pressed reactive materials. Trans Beijing Inst Technol, 2017, 37(4): 337
|