| Citation: |
LU Qinyao, ZHANG Rongliang, LU Tian’ai, LI Cong, ZENG Jia, ZHOU Linkai, Gao Yanyan. Preparation of nanometric magnesium oxide by hydrothermal method[J]. Powder Metallurgy Technology, 2023, 41(4): 350-355. DOI: 10.19591/j.cnki.cn11-1974/tf.2020100005
|
Nanometric magnesium oxide was prepared by hydrothermal method using magnesium chloride and ammonia water as the raw materials and polyethylene glycol as the dispersant. The crystal structure, microstructure, and particle size of the products were characterized by X-ray diffraction and scanning electron microscopy. The effects of molar ratio of MgCl2 to ammonia, reaction temperature, and reaction time on the precursors were discussed, and the influences of calcination temperature and calcination time on the nanometric magnesium oxide were investigated by the differential thermal analysis of the precursors. The results show that, when the molar ratio of MgCl2 to ammonia is 1.0:2.5, the reaction temperature is 200 ℃, the reaction time is 3.0 h, the precursor calcination temperature is 600 ℃, and the calcination time is 2.0 h, the MgO nanoparticles obtained are found to be disc-like and uniformly dispersed without agglomeration, showing a particle diameter of about 100 nm and a thickness of about 10 nm.
| [1] |
周红霞, 刘维俊, 朱发岩. 纳米氧化镁制备方法与进展. 盐业与化工, 2014, 43(7): 4
Zhou H X, Liu W J, Zhu F Y. Introduction of the nanometer magnesia preparation methods. J Salt Chem Ind, 2014, 43(7): 4
|
| [2] |
李萍. 球形纳米氧化镁的制备及其粒度影响因素. 化学研究与应用, 2019, 31(4): 747 DOI: 10.3969/j.issn.1004-1656.2019.04.026
Li P. Preparation of spherical nano-MgO and its influencing factors on particle size. Chem Res Appl, 2019, 31(4): 747 DOI: 10.3969/j.issn.1004-1656.2019.04.026
|
| [3] |
章波, 肖文灿, 徐浩, 等. 不同形貌纳米MgO的制备及其应用研究. 化工新型材料, 2017, 45(5): 43
Zhang B, Xiao W C, Xu H, et al. Research on preparation and application of nano magnesium oxide with different morphologies. New Chem Mater, 2017, 45(5): 43
|
| [4] |
Zhao B, Wan X G, Song W H, et al. Nano-MgO particle addition in silver-sheathed (Bi,Pb)2Sr2Ca2Cu3O x tapes. Phys C, 2000, 337(1): 138
|
| [5] |
黄蕾, 李殿卿, 林彦军, 等. 纳米MgO的可控制备及其对B.niger的杀灭性能. 科学通报, 2004, 22: 2294
Huang L, Li D Q, Lin Y J, et al. Controllable preparation of nanometer MgO and its killing effect on B.niger. Sci Bull, 2004, 22: 2294
|
| [6] |
Zhou J J, Xia Y, Gong Y Y, et al. Efficient natural organic matter removal from water using nano-MgO coupled with microfiltration membrane separation. Sci Total Environ, 2020, 7(11): 103
|
| [7] |
朱亚先, 曾人杰, 刘新锦, 等. MgO纳米粉制备及表征. 厦门大学学报(自然科学版), 2001(6): 1256
Zhu Y X, Zeng R J, Liu X J, et al. Preparation and characterization of MgO nanopowders. J Xiamen Univ Nat Sci, 2001(6): 1256
|
| [8] |
Sathyamoorthy R, Mageshwari K, Mali S S, et al. Effect of organic capping agent on the photocatalytic activity of MgO nanoflakes obtained by thermal decomposition route. Ceram Int, 2013, 39: 323 DOI: 10.1016/j.ceramint.2012.06.028
|
| [9] |
管洪波, 王培, 赵璧英, 等. 低温固相法制备高比表面积的纳米MgO. 催化学报, 2006(9): 793
Guan H B, Wang P, Zhao B Y, et al. Preparation of high specific surface area nano-MgO. J Catal, 2006(9): 793
|
| [10] |
金艳花, 潘旭杰, 代如梅, 等. 碳酸铵直接沉淀法制备纳米氧化镁的研究. 无机盐工业, 2014, 46(7): 33 DOI: 10.3969/j.issn.1006-4990.2014.07.009
Jin Y H, Pan X J, Dai R M, et al. Study on preparation of nano-MgO by direct precipitation of ammonium carbonate. Inorg Salt Ind, 2014, 46(7): 33 DOI: 10.3969/j.issn.1006-4990.2014.07.009
|
| [11] |
温艳珍, 薛永强, 崔子祥, 等. 均匀沉淀法制备不同粒径的纳米MgO. 粉末冶金工业, 2014, 24(3): 1 DOI: 10.3969/j.issn.1006-6543.2014.03.001
Wen Y Z, Xue Y Q, Cui Z X, et al. Preparation of nano-MgO with different particle size by homogeneous precipitation method. Powder Metall Ind, 2014, 24(3): 1 DOI: 10.3969/j.issn.1006-6543.2014.03.001
|
| [12] |
Pampuch R, Tomaszewski H, Haberko K. Hot-pressing of active magnesia. Ceram Int, 1975, 1(2): 81 DOI: 10.1016/0390-5519(75)90011-3
|
| [13] |
Chhor K, Bocquet J F, Pommier C. Syntheses of submicron magnesium oxide powders. Mater Chem Phys, 1995, 40(1): 63 DOI: 10.1016/0254-0584(94)01452-M
|
| [14] |
刘振. 溶胶-凝胶法由菱镁矿制备纳米氧化镁. 应用化工, 2012, 41(5): 837
Liu Z. Preparation of nano-MgO from magnesite by sol-gel method. Appl Chem, 2012, 41(5): 837
|
| [15] |
罗竹溪, 陈虎魁, 康芳, 等. 离子液体辅助水热法制备纳米氧化镁. 化学工程师, 2016, 30(12): 1
Luo Z X, Chen H K, Kang F, et al. Preparation of nano-MgO by ionic liquid-assisted hydrothermal method. Chem Eng, 2016, 30(12): 1
|
| [16] |
曲阳, 梁松岩, 余俊, 等. 合成氧化镁纳米片及其催化合成查尔酮性能. 黑龙江大学自然科学学报, 2019, 36(2): 196
Qu Y, Liang S Y, Yu J, et al. Synthesis of MgO nanosheets for catalyzing synthesis chalcone. J Nat Sci Heilongjiang Univ, 2019, 36(2): 196
|
| [17] |
孙天昊, 郝素菊, 蒋武锋, 等. 纳米氧化铁的制备及形貌分析. 粉末冶金技术, 2021, 39(1): 76
Sun T H, Hao S J, Jiang W F, et al. Preparation and morphology analysis of nano-sized iron oxide. Powder Metall Technol, 2021, 39(1): 76
|
| [1] | LÜ Shiya, KUANG Chunjiang, WANG Lei, CUI Lei, ZHANG Jun, CAO Rui. Preparation and properties of Fe−Si−B−Cr−C amorphous alloy powders by air-water combination atomization with different particle sizes[J]. Powder Metallurgy Technology, 2024, 42(6): 638-644. DOI: 10.19591/j.cnki.cn11-1974/tf.2023080001 |
| [2] | LIU Baixiong, HUANG Shaoyong, LIU Zhiping, ZHAO Wenmin. Controllable preparation and regulation mechanism of ultrafine spherical cobalt powders[J]. Powder Metallurgy Technology, 2024, 42(6): 609-620. DOI: 10.19591/j.cnki.cn11-1974/tf.2022090006 |
| [3] | ZHANG Mai, LIANG Jiamiao, LIU Mohan, LI Dong, BAIXIAO Chengti, XU Kai, WANG Jun. Effects of powder size and sintering temperature on microstructure and properties of porous K418 superalloys[J]. Powder Metallurgy Technology, 2023, 41(5): 442-448. DOI: 10.19591/j.cnki.cn11-1974/tf.2022040002 |
| [4] | WANG Hai-lu, LIU Jun, LIN Li, ZHANG Chao, ZHANG Lu-dong, KE Jian-zhong, LI Hua-ying. Compacting relative density and force chain analysis of powders with different particle size ratios based on discrete element[J]. Powder Metallurgy Technology, 2021, 39(6): 490-498. DOI: 10.19591/j.cnki.cn11-1974/tf.2019120014 |
| [5] | REN Feng-yan, XU Lei, LI Chang-yun, MI Guo-fa, WANG You-chao. Research progress in the preparation of particle-reinforced magnesium matrix composites by powder metallurgy[J]. Powder Metallurgy Technology, 2020, 38(1): 66-73. DOI: 10.19591/j.cnki.cn11-1974/tf.2020.01.010 |
| [6] | PAN Shi-yan, DAI Wen-jie, ZHOU Zi-hao, JIANG Jie, HUO Tian-yuan, SHEN Xiao-ping, FAN Cang. Simulation study on size distribution evolution of powder particles in liquid phase sintering[J]. Powder Metallurgy Technology, 2018, 36(6): 409-417,422. DOI: 10.19591/j.cnki.cn11-1974/tf.2018.06.002 |
| [7] | Liu Tao, Fan Jinglian, Tian Jiamin, Cheng Huichao. Phase transformation during calcining and reducing of spray-dried W-Cu precursor powder[J]. Powder Metallurgy Technology, 2010, 28(2): 83-86,91. |
| [8] | Liu Shuzhong, Li Xiaoyang, Zhu Xinkun, Zhao Jianwei. Effects of calcination temperature on antimony-doped tin oxide powders[J]. Powder Metallurgy Technology, 2009, 27(3): 212-215. |
| [9] | Xiao Jin, Chen Yanbin, Zhou Feng, Peng Zhongdong, Li Jie, Liu Yexiang. Effects of calcining methods and addictives on AIN powder prepared by carbothermal reduction[J]. Powder Metallurgy Technology, 2008, 26(5): 332-335. |
| [10] | Zhao Maiqun. ESTIMATION OF RATIO BETWEEN DIAMETER AND THICKNESS OF LAMINAR METALLIC PIGMENT AND THICKNESS OF COATING[J]. Powder Metallurgy Technology, 1996, 14(2): 88-91. |
Supported by: Beijing Renhe Information Technology Co., Ltd. 
DownLoad: